Discuss

discuss@lists.centos.org

5 participants
34752 discussions

systemd
by Jerry Geis 08 Feb '19

08 Feb '19

Hi All - I have a systemd service file to start my application. Part of my service file is: [Service] Type=forking ExecStart=/path to start ExecStop=/path to stop RemainAfterExit=yes This works fine "normally". However - when I do a "yum update; and reboot" my script detects a kernel change and now does a number of "recompiling" steps for drivers and such before starting my application. Somewhere along the way that just stops. I'm half way into recompiling those drivers and it just stops. Is there something else I need in the service file ? Thanks Jerry

3 2

CentOS 6 and 389 Directory Server
by Eugene Poole 07 Feb '19

07 Feb '19

I'm not sure it this is the correct location to ask these questions, but ... In the past when I worked for a living the place where I worked had thousands of RHEL Linux servers on various hardware, but the access was controlled by Windows Active Directory and a third party piece of software that was the middle-man between the 2. Now that I no longer work I'm trying to build a CentOS Linux environment where the access is controlled by 389-Directory Server. But I have no practical experience with 389-Directory Server (Question 1) so I'm looking for a tutorial or 'How To' to put information into 389-DS from a machine that is currently running? (Question 2) Can I export the 389-DS database to a LDIF file, migrate my machine from CentOS 6 to CentOS 7 by doing a fresh CentOS 7 install. Install 389-DS and import the just created LDIF file? I want to use 389-DS (or OpenLDAP) because as my environment grows defining everything locally is becoming hard to be exact. Any comments will be helpful TIA -- Eugene Poole Woodstock, Georgia

2 1

Pb with bounding
by Pierre Malard 07 Feb '19

07 Feb '19

Hi, We have a Dell server with 4 Ethernet interface. I would to aggregate them in a bond. Everything work but the default gateway doesn’t work on the « bond0 » interface and I have no links. My configuration: - CentOS 7: :/etc/sysconfig/network-scripts# uname -a Linux nas-mtd2 3.10.0-957.5.1.el7.x86_64 #1 SMP Fri Feb 1 14:54:57 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux - NetworkManager disabled: :/etc/sysconfig/network-scripts# systemctl list-unit-files | grep NetworkManager NetworkManager-dispatcher.service disabled NetworkManager-wait-online.service disabled NetworkManager.service disabled - ifcfg-em1 to em4 (they are identical): :/etc/sysconfig/network-scripts# cat ifcfg-em2 NAME=bond0-slave[1 to 4] DEVICE=em[1 to 4] TYPE=Ethernet BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes NM_CONTROLLED=no - the bond0 declaration: :/etc/sysconfig/network-scripts# cat ifcfg-bond0 DEVICE=bond0 TYPE=Ethernet BONDING_MASTER=yes BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no # IP IPADDR=172.16.1.128 PREFIX=16 GATEWAY=172.16.0.254 # Bonding BONDING_OPTS="mode=802.3ad ad_select=stable use_carrier=1 miimon=100 arp_ip_target=172.16.1.128 updelay=100 lacp_rate=fast" USERCTL=no After a « systemctl restart network »: :/etc/sysconfig/network-scripts# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:0e brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff inet 172.16.1.128/16 brd 172.16.255.255 scope global bond0 valid_lft forever preferred_lft forever And the route command: :/etc/sysconfig/network-scripts# ip r default via 172.16.0.254 dev bond0 169.254.0.0/16 dev bond0 scope link metric 1006 169.254.0.0/16 dev bond0.10 scope link metric 1008 172.16.0.0/16 dev bond0 proto kernel scope link src 172.16.1.128 but their is no network connection on « bond0 »! The only way I found to have a network active connection is keeping my first interface outside the bond and having the default route on this one! In this case I have a specific IP to it and a bond one on bound. As I must have also a VLAN connection on the bound, I have create a « ifcfg-bond0.10 » file: :/etc/sysconfig/network-scripts# cat ifcfg-bond0.10 NAME=bond0.10 DEVICE=bond0.10 #TYPE="Ethernet" VLAN=yes NM_CONTROLLED=no ONPARENT=yes DEFROUTE="no" # IP IPADDR=XXX.XXX.XXX.142 NETMASK=255.255.255.0 NETWORK=XXX.XXX.XXX.0 BROADCAST=XXX.XXX.XXX.255 PREFIX=24 GATEWAY=1XXX.XXX.XXX.126 With that and the first Ethernet interface on a specific address I have: :/etc/sysconfig/network-scripts# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether d0:94:66:65:32:0e brd ff:ff:ff:ff:ff:ff inet 172.16.1.86/16 brd 172.16.255.255 scope global em1 valid_lft forever preferred_lft forever 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff inet 172.16.1.128/16 brd 172.16.255.255 scope global bond0 valid_lft forever preferred_lft forever 8: bond0.10@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff inet XXX.XXX.XXX.142/24 brd XXX.XXX.XXX.255 scope global bond0.10 valid_lft forever preferred_lft forever :/etc/sysconfig/network-scripts# ip r default via 172.16.0.254 dev em1 169.254.0.0/16 dev em1 scope link metric 1002 169.254.0.0/16 dev bond0 scope link metric 1006 169.254.0.0/16 dev bond0.10 scope link metric 1008 172.16.0.0/16 dev em1 proto kernel scope link src 172.16.1.86 172.16.0.0/16 dev bond0 proto kernel scope link src 172.16.1.128 XXX.XXX.XXX.0/24 dev bond0.10 proto kernel scope link src XXX.XXX.XXX.142 And everything is working. But… I am not satisfy. Is it normal? Is it a way to have all the Ethernet link on a bond? Your help is needed :-) Best wishes -- Pierre Malard « Si l'on veut croire en l'humanité, il faut voir et comprendre l'inhumanité » |\ _,,,---,,_ /,`.-'`' -. ;-;;,_ |,4- ) )-,_. ,\ ( `'-' '---''(_/--' `-'\_) πr perl -e '$_=q#: 3|\ 5_,3-3,2_: 3/,`.'"'"'`'"'"' 5-. ;-;;,_: |,A- ) )-,_. ,\ ( `'"'"'-'"'"': '"'"'-3'"'"'2(_/--'"'"' `-'"'"'\_): 24πr::#;y#:#\n#;s#(\D)(\d+)#$1x$2#ge;print' - --> Ce message n’engage que son auteur <--

2 2

reinstall
by Jerry Geis 05 Feb '19

05 Feb '19

I have a C7 7.6.1810 install that I wish to "reinstall". when I run "yum reinstall \* " I get a long list of items saying will be updated or will be installed but then nothing happens - nothing is re-downloaded etc... How do I get the system to actual download all current packages and re-install them ? Thanks, Jerry

1 0

Problem Webinstall Centos 7 on Acer S2000 32 Bit.
by Ger van Dijck 05 Feb '19

05 Feb '19

Hi Centos World , I am trying to install Centos 7 (i686) on an Acer 2000 PC and I get following message(s) : [0117110] ACPI : SCI (ACPI GSIG) not registered . [26.532360] systemd [1] : caught <ILL> , dumped core as pid 76. [26.532956] systemd [1] : Freezing execution. My question is : What is wrong and how can I solve this problem ? Maybe a fresh install ? Regards , Ger van Dijck . -- Using Opera's mail client: http://www.opera.com/mail/

1 1

Back to c7 and firewalld
by mark 05 Feb '19

05 Feb '19

If I've missed someone's response, apologies. As I said, my converted rules seem fine, and I can run the script that issues a bunch of direct rules for the built-in FORWARD rule... but when I try firewall-cmd --reload, it tells me error, that FORWARD is a built-in. Now, today, what I've been looking at is to run iptables-save, and what I see is this (in part): -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -j FORWARD_direct -A FORWARD -j FORWARD_IN_ZONES_SOURCE -A FORWARD -j FORWARD_IN_ZONES -A FORWARD -j FORWARD_OUT_ZONES_SOURCE -A FORWARD -j FORWARD_OUT_ZONES -A FORWARD -m conntrack --ctstate INVALID -j DROP -A FORWARD -j REJECT --reject-with icmp-host-prohibited Does this mean that, instead of the format of the entry of the rule being firewall-cmd --permanent --direct --add-rule ipv4 filter FORWARD <actual rule) that it should, instead, be firewall-cmd --permanent --direct --add-rule ipv4 filter FORWARD_direct <actual rule> ? And if that's what I need to do, that's fine, but I have found *zero* documentation about that. Everything I have found about adding direct rules to a built-in chain don't mention it. Is this so new, it's not documented? mark

1 0

looking for a tool to convert my running system into a installation dvd
by Ralf Prengel 05 Feb '19

05 Feb '19

Hallo, I m looking for a tool to convert my running system into a installation dvd. Thanks for hint. I found some tools working more or less for debian. Thank for hints Ralf Von meinem iPad gesendet

4 3

C7 and firewalld, ongoing
by mark 04 Feb '19

04 Feb '19

I've got my direct rules, converted from a C6 iptables-save. I load them - they're to add to the built-in FORWARD chain. They all seem to load... but then, when I try to --reload, I get Error: BUILTIN_CHAIN: chain 'FORWARD' is built-in chain and firewall-cmd --direct --get-all-rules returns nothing. A sample command in my script is firewall-cmd --permanent --direct --add-rule ipv4 filter FORWARD 1 -m state --state RELATED,ESTABLISHED -j ACCEPT So, what am I doing wrong: mark

1 0

Bug in libreoffice or cups?
by mark 04 Feb '19

04 Feb '19

C7 My manager's manager sent out a ppt. Nothing fancy, no animation. 1. Page down doesn't get me to the next page. 2. Slide show decides that on my left monitor, it should fill the entire monitor- no options, with the slide, and the next slide, and that my right-hand monitor shuold be *COMPLETELY* filled with the slide. 3. Hitting <esc> gets rid of the one on the right... and anything then crashes all instances of libreoffice. 4. I just tried to print it out... and suddenly, printer options, or the print box itself, no longer offers me the option to fit to paper, so landscape, and it goes off the page. Esp. that last one - bug or "feature"? mark

1 1

PCMCIA on Centos 7
by Kevin K 02 Feb '19

02 Feb '19

Anyone ever look into what would be required to support 16 bit PCMCIA cards on 7? There are still 64 bit computers out there with at least 1 PCMCIA slot. Thanks, Kevin

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss