Discuss

discuss@lists.centos.org

34753 discussions

Lost my madwifi setup
by Robert Moskowitz 17 Jul '08

17 Jul '08

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old notes mention using ath0 and a line in modprobe.conf of: alias ath0 ath_pci options ath_pci autocreate=sta I think there were some iwconfig commands somewhere too. But it is all gone....... sniff. I hope someone can help? I am going through this list's archives trying to find my old messages too.

2 4

SERIOUSLY OT STREAM EDITING IMAGES
by Chris Geldenhuis 16 Jul '08

16 Jul '08

Hi All, I have been Googling my head off but cannot find a method to stream edit all the images in a directory and to resize them. I have a large number of images of up to 3GB in size that I want to put in albums on a website, but before I do this I need to resize them to a more realistic configuration. I know how to do this manually with the GIMP but it becomes tedious for more than a few images. Running CentOS 5 as virtualised under XEN as a web server. TIA ChrisG

9 11

centralized patch management
by Terry 16 Jul '08

16 Jul '08

Hello, I have been asked to come up with a strategy for centralized patch management of our linux servers. Today, this is only centos and rhel. What is everyone else doing in this arena? Thanks!

9 11

pear
by David Hrbáč 16 Jul '08

16 Jul '08

Hi, is it safe to install additional modules to pear with "pear install"? I need php-pear-MDB2 which is in CentosPlus but does not contain php-pear-MDB2_Driver_xxx. So I did: yum install php-pear-MDB2 pear upgrade MDB2 pear install MDB2#mysql Thanks, David

3 7

RE: [CentOS] yum remove <old kernel pkgs> -- wants to remove a to n of stuff
by Bowie Bailey 16 Jul '08

16 Jul '08

Johnny Hughes wrote: > > You are trying to remove kernel-utils ...you don't want to do that. > That might cut back the deps a bit. Also, i never remove packages with > yum, but with: > > rpm -e `cat list` > > But, that is just my advise. I didn't think there was any functional difference between: rpm -e package-name and yum remove package-name Isn't yum just a front-end for the rpm system? -- Bowie

5 4

RE: [CentOS] yum remove <old kernel pkgs> -- wants to remove a to n of stuff
by Bowie Bailey 16 Jul '08

16 Jul '08

Johnny Hughes wrote: > Bowie Bailey wrote: > > Johnny Hughes wrote: > >> You are trying to remove kernel-utils ...you don't want to do that. > >> That might cut back the deps a bit. Also, i never remove packages with > >> yum, but with: > >> > >> rpm -e `cat list` > >> > >> But, that is just my advise. > > > > I didn't think there was any functional difference between: > > > > rpm -e package-name > > > > and > > > > yum remove package-name > > > > Isn't yum just a front-end for the rpm system? > > > There is a huge difference. > > rpm -e will tell you that you package foo (that you want to install) is > required by package bar, so don't install it. > > Yum will resolve all the dependancies and try to remove foo and bar and > anything else that is required to be removed if bar is removed, etc. > > If you are not careful, you can get things like glibc removed with "yum > remove". > > I normally want to resolve my own deps if I remove something. I once > DID remove glibc from a machine with "yum remove" ... and that is NOT > pretty to recover from :D That makes sense. I am always very careful about reviewing the dependency list when using yum for installing or removing packages, but I can see how you might accidentally remove something you didn't intend to. -- Bowie

1 0

FW: Conga question
by Lopez, Denise 16 Jul '08

16 Jul '08

From: Lopez, Denise Sent: Wednesday, July 16, 2008 11:14 AM To: 'centos-bounces(a)centos.org' Subject: Conga question Hi all, I am trying to setup a high-availablility cluster using CentOS 5.2. All packages are currently up2date using yum. I would like to use it for automatic failover of Xen virtualized servers eventually. Right now I am just trying to create a new cluster with 2 Dell PowerEdge 1950 nodes. I have a separate luci server. One of the nodes connects just fine and the other one is hanging. On each node, a clustat displays that both nodes are online. I don't have anything else configured past the "Create a Cluster" page (ie. fencing, services, share resources). On the luci server, I keep getting the following error: "Unable to retrieve batch 640093076 status from hostname:11111: module scheduled for execution" Does anyone know what could be causing this. Port 11111 is open to all tcp on both nodes and I show an established connection with the node using netstat -antulp. For right now, the xend service is turned off on both nodes. Thanks in advance. Denise Lopez UCLA - Center for Digital Humanities Network Services Linux Systems Engineer 337 Charles E. Young Drive East PPB 1020 Los Angeles, CA 90095-1499 310/206-8216

1 0

question regarding mx servers with same priority
by fabian dacunha 16 Jul '08

16 Jul '08

Dear ALL I have the following setup running good for quite sometime and i wd really apprecite if someone wd help or give some suggestions centos 5.1 sendmail dns server now recently our mail usage has increased considerably and moreover Mails have become a utmost top priority i have 2 options now 1) have a backup server with lower higher MX i tested this setup n had some queries earlier n thanks to guys like scott for some prfect advise i did manage to check it out n it works beautiful 2) have another server with same value of MX so it cd load balance and also doc says if one server is down or unavaliable the oher server would receive mail now my query is ... if i now configure a second mail server with same MX priority . a) do i have to create all the existing user accounts on my existing email server to this new server cause i already hav about 300+ email users already b) incase my first email server fails are the emails on the first server lost c) alos apprecite if someone can help me with any links or docs for the above setup apprecite and really thnks in advance regards Fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 4

Xorg "intel" driver on 965Q lockup?
by Ken Key 16 Jul '08

16 Jul '08

Hi Folks, anyone out there successful in using the new xorg "intel" driver module on a 965Q-based motherboard with CentOS 5.2? The old "i810" and "vesa" work fine, I am looking for anyone else with experience with the new "intel" video driver in 5.2. The long of it: I have a customer's Dell Optiplex 745 (Core2 Duo 6300, 965Q chipset with integrated video) connected to a 19" NEC 1760V. Graphical installs of CentOS 5.2 completely locks the system when X starts. Text install succeeds and creates an xorg.conf using the "intel" video driver. Starting X causes complete machine lockup (no network - no ping, SSH dead) requiring a power cycle. This happens 95% of the time. I immediately assumed hardware problems but it passes memtest86 just fine and works with other video drivers. BIOS was 2.3.1 and I upgraded to latest 2.6.1 - no change. Unfortunately, a day of testing did not nail down a commonality of events to explain why the "intel" driver occasionally succeeds. Usually, it's after I've been in the BIOS menu so I suspect it is the video being in just the right state for it to succeed, but again it is not 100% reproducible. When the system locks up, no /var/log/X.0.log has been written or anything in the log files. I would like to build a kernel with sysrq key enabled to break into the kernel debugger on lockup, but I don't have the time as the hardware will be leaving soon. Switching to the "i810" or "vesa" drivers succeed 100% of the time so I have a workaround: a text install and manual edit of /etc/X11/xorg.conf to "i810". My app is old-school 2D so graphical performance is not a concern of mine. I've done searches of upstream Bugzilla, xorg, CentOS bugs, and the 'net in general and, while I find X display lockups with the "intel" driver, I do not find any complete system lockups. I'll file a bug against upstream but I'm trying to get a feel of what the scope of the problem is. I know there are folks using the "intel" driver successfully on other distros, so I'm trying to see if this is a CentOS problem, a RHEL problem, a Dell 745 problem, or just the one box I have (despite tests). Thanks for any feedback, Ken Key

3 2

Problem with mod_proxy_ajp.so
by Sergio Belkin 16 Jul '08

16 Jul '08

Hi, After updating httpd package it outputs an error when restarting apache. Problem was "workarounded" commenting out line 2 of /etc/httpd/modules/mod_proxy_ajp.so Starting httpd: httpd: Syntax error on line 210 of /etc/httpd/conf/httpd.conf: Syntax error on line 3 of /etc/httpd/conf.d/proxy_ajp.conf: Cannot load /etc/httpd/modules/mod_proxy_ajp.so into server: /etc/httpd/modules/mod_proxy_ajp.so: undefined symbol: proxy_module. When I issue /etc/httpd/conf.d/proxy_ajp.conf, it outputs: httpd-2.2.3-11.el5_1.centos.3 I am using Centos 5 and and httpd-2.2.3-11.el5_1.centos.3 Could you help me to find a better solution? Thanks in advance! -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss