Discuss

discuss@lists.centos.org

34753 discussions

ASUS WL-100W PCMCIA Wireless NIC
by Alexandru E. Ungur 11 May '08

11 May '08

Hi everyone, Any chance I can get the card[1] in $subj to work under CentOS 5.1 ? The only thing I get in dmesg when inserting/removing the card, are messages from pccard: --- dmesg --- pccard: CardBus card inserted into slot 0 pccard: card ejected from slot 0 --- end --- When inserting, no new network interface becomes available, so I assume it doesn't recognize it. Any way I can get it to work? Tips, pointers to relevant docs are all very appreciated. Thank you very much in advance, and have a great day everyone. Cheers, Alex 1. http://www.asus.com/products.aspx?l1=12&l2=42&l3=135&model=1278&modelmenu=1

3 3

Today's log - yum entries
by Ned Slider 11 May '08

11 May '08

Hi list, I have the following entries, below, in today's log file (for yesterday, 10th May). I don't run the automated yum-updated and didn't run a yum update yesterday, and no packages were installed. Obviously the entries are old. I was wondering if anyone could offer an explanation? Thanks, Ned --------------------- yum Begin ------------------------ Packages Installed: lzo.i386 1.08-4.2.el5.rf libmad.i386 0.15.1b-4.el5.rf lame.i386 3.97-1.el5.rf faac.i386 1.25-2.el5.rf mplayer.i386 1.0-0.34.rc1try2.el5.rf giflib.i386 4.1.3-7.1.el5.1 xvidcore.i386 1.1.2-1.el5.rf mplayerplug-in.i386 3.40-1.el5.rf openal.i386 0.0.8-2.el5.rf kernel-devel.i686 2.6.18-8.1.3.el5 xorg-x11-server-sdk.i386 1.1.1-48.13.0.1.el5 dkms.noarch 2.0.13-1.el5.rf lirc.i386 0.6.6-4.el5.rf libdvdnav.i386 0.1.10-3.el5.rf aalib.i386 1.4.0-5.el5.rf perl-libwww-perl.noarch 5.805-1.1.1 libmpcdec.i386 1.2.2-2.el5.rf x264.i386 0.0.0-0.3.20061214.el5.rf mplayer-fonts.noarch 1.1-3.0.rf libmp4v2.i386 1.5.0.1-3.el5.rf Packages Updated: libX11-devel.i386 1.0.3-8.0.1.el5 xorg-x11-apps.i386 7.1-4.0.1.el5 kernel-headers.i386 2.6.18-8.1.3.el5 vim-enhanced.i386 2:7.0.109-3.el5.3 cups.i386 1:1.2.4-11.5.1.el5 firefox.i386 1.5.0.10-2.el5.centos freetype-devel.i386 2.2.1-17.el5 evolution.i386 2.8.0-33.0.1.el5 libX11.i386 1.0.3-8.0.1.el5 yelp.i386 2.16.0-14.0.1.el5 spamassassin.i386 3.1.8-2.el5 postgresql-libs.i386 8.1.9-1.el5 vim-minimal.i386 2:7.0.109-3.el5.3 vim-common.i386 2:7.0.109-3.el5.3 devhelp.i386 0.12-10.0.1.el5 cups-libs.i386 1:1.2.4-11.5.1.el5 freetype.i386 2.2.1-17.el5 ---------------------- yum End ------------------------- Last 25 packages installed/updated as reported by RPM: $ rpm -qa --last | head -n 25 kernel-headers-2.6.18-53.1.19.el5 Fri 09 May 2008 06:45:18 PM BST kernel-2.6.18-53.1.19.el5 Fri 09 May 2008 06:41:23 PM BST kernel-devel-2.6.18-53.1.19.el5 Fri 09 May 2008 06:40:49 PM BST flash-plugin-9.0.124.0-1.el5.rf Wed 07 May 2008 01:18:16 AM BST xine-lib-1.1.12-1.el5.rf Wed 07 May 2008 01:17:56 AM BST perl-BerkeleyDB-0.34-1.el5.rf Wed 07 May 2008 01:17:53 AM BST p7zip-plugins-4.57-1.el5.rf Fri 25 Apr 2008 12:57:38 AM BST p7zip-4.57-1.el5.rf Fri 25 Apr 2008 12:57:35 AM BST gnome-screensaver-2.16.1-5.el5_1.1 Thu 24 Apr 2008 05:03:23 AM BST amavisd-new-2.5.4-1.el5.rf Wed 23 Apr 2008 07:14:03 PM BST clamd-0.93-2.el5.rf Wed 23 Apr 2008 07:14:01 PM BST clamav-0.93-2.el5.rf Wed 23 Apr 2008 07:13:59 PM BST clamav-db-0.93-2.el5.rf Wed 23 Apr 2008 07:13:58 PM BST ncompress-4.2.4-47 Wed 23 Apr 2008 07:13:57 PM BST perl-Archive-Zip-1.16-1.2.1 Wed 23 Apr 2008 07:13:56 PM BST nomarch-1.4-1.el5.rf Wed 23 Apr 2008 07:13:55 PM BST freeze-2.5.0-1.2.el5.rf Wed 23 Apr 2008 07:13:55 PM BST lha-1.14i-19.2.2.el5.rf Wed 23 Apr 2008 07:13:54 PM BST perl-Convert-TNEF-0.17-3.2.el5.rf Wed 23 Apr 2008 07:13:53 PM BST perl-MIME-tools-5.420-2.el5.rf Wed 23 Apr 2008 07:13:52 PM BST perl-Convert-UUlib-1.051-1.2.el5.rf Wed 23 Apr 2008 07:13:51 PM BST perl-Convert-BinHex-1.119-2.2.el5.rf Wed 23 Apr 2008 07:13:51 PM BST arc-5.21o-1.el5.rf Wed 23 Apr 2008 07:13:50 PM BST perl-MailTools-2.02-1.el5.rf Wed 23 Apr 2008 07:13:49 PM BST zoo-2.10-2.2.el5.rf Wed 23 Apr 2008 07:13:47 PM BST

5 10

Howto get yum/http download statistics?
by Patrick 11 May '08

11 May '08

Hi, How do you get yum/http download statistics of files (rpms) that live on a CentOS5.1 box with Apache? Is it just a matter of installing some weblog analyzer software or is some other magic needed? Thanks! Patrick

2 2

problem with yumdownload?
by John R Pierce 11 May '08

11 May '08

coworker wants to download a module with all its dependencies, for use in updating an offline system... CentOS 5.latest ... [root@pig home]# yum -y install yum-utils ...... [root@pig home]# yumdownloader --resolve gcc Loading "priorities" plugin Loading "installonlyn" plugin Excluding Packages from CentOS-5 - Base Finished Excluding Packages from CentOS-5 - Updates Finished 263 packages excluded due to repository priority protections Traceback (most recent call last): File "/usr/bin/yumdownloader", line 191, in ? main() File "/usr/bin/yumdownloader", line 159, in main if not pkg in toDownload: File "/usr/lib/python2.4/site-packages/yum/packages.py", line 191, in __eq__ if other == None: File "/usr/lib/python2.4/site-packages/yum/transactioninfo.py", line 403, in __cmp__ if self.name > other.name: AttributeError: 'NoneType' object has no attribute 'name' [root@pig home]# um... this a bug?

3 4

CentOS-announce Digest, Vol 39, Issue 5
by centos-announce-request＠centos.org 11 May '08

11 May '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0237 Important CentOS 4 ia64 kernel - security update (Pasi Pirhonen) 2. CESA-2008:0224 Moderate CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) 3. CESA-2008:0262 Important CentOS 4 ia64 gpdf - security update (Pasi Pirhonen) 4. CESA-2008:0211 Important CentOS 3 s390(x) kernel - security update (Pasi Pirhonen) 5. CESA-2008:0237 Important CentOS 4 s390(x) kernel - security update (Pasi Pirhonen) 6. CESA-2008:0224 Moderate CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) 7. CESA-2008:0262 Important CentOS 4 s390(x) gpdf - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 10 May 2008 16:01:48 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0237 Important CentOS 4 ia64 kernel - security update To: centos-announce(a)centos.org Message-ID: <20080510130148.GA2456(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0237 https://rhn.redhat.com/errata/RHSA-2008-0237.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/kernel-2.6.9-67.0.15.EL.ia64.rpm updates/ia64/RPMS/kernel-devel-2.6.9-67.0.15.EL.ia64.rpm updates/ia64/RPMS/kernel-largesmp-2.6.9-67.0.15.EL.ia64.rpm updates/ia64/RPMS/kernel-largesmp-devel-2.6.9-67.0.15.EL.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Windows key works some times I boot, doesn't work others
by Nick Fenwick 11 May '08

11 May '08

Hi all, I run CentOS5.1 with all updates, and like to use metacity's keybindings (gconf-editor->/apps/metacity/global_keybindings and keybinding_commands) to set shortcut keys for xterm, nautilus, and the like, so <Mod4>x runs xterm and <Mod4>e runs nautilus, rather how Windows-XP keyboard shortcuts work. I always log on as 'neek', the only user other than 'root' that I use for user shells on this laptop. I've used a default Gnome desktop since fresh install about 4 months ago. I find that sometimes when I boot, the keybindings take effect, and sometimes when I boot, they do not. I reckon one of two things might be happening: - on some boots, the gconf configuration that I have set up fails to be loaded - on some boots, my windows key mapping somehow gets screwed, so that pressing it does not send a Mod4 keystroke to whatever recognises them I don't think the former is happening, because I can run gconf-editor as 'neek' and see my keybinding configuration even when the keybindings are not working, such as this morning. I suspect the latter, because I can press Mod4-x and get an 'x' character in places where I'd expect it to not give me an 'x', for example in an xterm pressing the key combination just sends an 'x' to the console, whereas alt-x does not. When the windows key is working as expected, I don't see an 'x' echo'd to the console. How can I investigate why my Windows key is not triggering the expected keybinding commands? TIA Nick

2 2

OT: YUM, RPM and PGP keys
by James B. Byrne 10 May '08

10 May '08

A short time ago a message on this list referred to an OSS project called ledgersmb. I am having a deal of difficulty getting this installed and as the web page at www.ledgersmb.org yields a "page not found" error and the ledger-smb-users mailing list seems very lightly used I wonder if someone here could help me out? I have ploughed through all of the perl dependencies for ledgersmb v-1.2.13, thanks to Dag's repositories, but I have run up against a roadblock on this: Installing: ledgersmb noarch 1.2.13-1 ledgersmb-1.2.13-1.noarch.rpm 9.2 M Installing for dependencies: dialog i386 1.0.20051107-1.2.2 base 162 k perl-Smart-Comments noarch 1.0.3-1.el5.rf dag 23 k tetex i386 3.0-33.2.el5_1.2 updates 13 M tetex-latex i386 3.0-33.2.el5_1.2 updates 5.4 M Transaction Summary ============================================================================= Install 5 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 28 M Is this ok [y/N]: y Downloading Packages: warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 8da0af10 Public key for ledgersmb-1.2.13-1.noarch.rpm is not installed However, I believe that I have imported this key, at least I did this: # curl http://ledgersmb.org/files/ledgersmb.pub-key.gpg > ledgersmb.pub-key.gpg % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1048 100 1048 0 0 7494 0 --:--:-- --:--:-- --:--:-- 0 # rpm --import ledgersmb.pub-key.gpg and yet I keep getting the same key not installed error: My questions are several. 1. Can one force the package to install regardless of the missing key; and, if so, exactly how is that done? 2. Is the key that I have imported the correct one? 3. Is there a command to list what keys rpm has imported? Thanks, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

CentOS-announce Digest, Vol 39, Issue 4
by centos-announce-request＠centos.org 10 May '08

10 May '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0237 Important CentOS 4 i386 kernel Update (Johnny Hughes) 2. CESA-2008:0237 Important CentOS 4 x86_64 kernel Update (Johnny Hughes) 3. CESA-2008:0211 Important CentOS 3 ia64 kernel - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 09 May 2008 21:08:23 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2008:0237 Important CentOS 4 i386 kernel Update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <48250397.8060603(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" CentOS Errata and Security Advisory 2008:0237 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0237.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: kernel-2.6.9-67.0.15.EL.i586.rpm kernel-2.6.9-67.0.15.EL.i686.rpm kernel-devel-2.6.9-67.0.15.EL.i586.rpm kernel-devel-2.6.9-67.0.15.EL.i686.rpm kernel-doc-2.6.9-67.0.15.EL.noarch.rpm kernel-hugemem-2.6.9-67.0.15.EL.i686.rpm kernel-hugemem-devel-2.6.9-67.0.15.EL.i686.rpm kernel-smp-2.6.9-67.0.15.EL.i586.rpm kernel-smp-2.6.9-67.0.15.EL.i686.rpm kernel-smp-devel-2.6.9-67.0.15.EL.i586.rpm kernel-smp-devel-2.6.9-67.0.15.EL.i686.rpm kernel-xenU-2.6.9-67.0.15.EL.i686.rpm kernel-xenU-devel-2.6.9-67.0.15.EL.i686.rpm src: kernel-2.6.9-67.0.15.EL.src.rpm ============================================================= NOTE: if you try to recompile this kernel to build in support for MOXA serial cards, you will encounter this bug which must be corrected: https://bugzilla.redhat.com/show_bug.cgi?id=445863

1 0

Intel ICH9R Raid5 Recovery
by Ruslan Sivak 10 May '08

10 May '08

I had a raid5 on an onboard Intel ICH9R chip under windows. Windows crashed, as it often does, and the array became degraded. At some point during the rebuild, I was doing some hardware maintanence and unplugged one of the drives, and forgot to plug it back in. When I booted up, the array came back as failed. I turned off the PC, plugged the drive back in and powered it back on, but the array stayed as failed. Is there a way to recover the data? I heard dmraid supports ich9r raid volumes, but I keep getting an error saying unsupported map state 2. I found out that dmraid doesnt' support raid 5 (at least not on a ICH9R chip). I heard about this patch: http://people.redhat.com/heinzm/sw/dm/dm-raid45/, but I'm not sure how to apply it to a linux live cd. Does anyone have any idea? Is there maybe a way to reset the metadata to make the intel controller boot the array anyway? Russ

2 3

Recover ICH9R raid5
by Ruslan Sivak 10 May '08

10 May '08

I have a raid5 on an onboard ICH9R FAKERAID. I was booting into windows and windows crashed as it sometimes does, which put my array into a degraded step. At some point before the array finished rebuilding I unplugged one of the drives and forgot to plug it back in. When I booted up the system, it told me that the array was now failed. I plugged the drive back in, but the array stays as failed and offers me no option to repair it. I heard that dmraid supports ICH9R raid. Is there any way to get the data off of there? When I try to use dmraid of a knoppix live cd it complaints about an unsupported map state 0x2. I heard there was a patch http://people.redhat.com/heinzm/sw/dm/dm-raid45/, but I'm not sure how to apply that to a LiveCD. Does anyone have any ideas on how I can recover the data? Maybe I can just change the metadata and force it to boot the array? Russ

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss