Discuss

discuss@lists.centos.org

5 participants
34752 discussions

touchpad problem
by Fred Smith 18 Nov '18

18 Nov '18

Hi all! I have a new-to-me (i.e., used) laptop and am having a problem making the touchpad behave. It is an old HP Elitebook 8530p, and I THINK it has a synaptics touchpad. But I don't remember how to get more specifics than that on Linux, lspci, lsusb and lshw don't tell me anything helpful. lsmod doesn't list anything containing "syn" or "synaptics". Anyway, I've installed C7 on the laptop and pretty much everything works just as I expect it to, but even though I configure the touchpad for two-finger-scrolling, it simply won't do it. It also won't do edge-scrolling, and it has a mark along the right side of the pad that seemingly implies it should do edge-scrolling. If I could figure out which synaptics touchpad it is I might be able to find out if it does or does not support two-finger scrolling (like both my netbooks do). Can any of you remind me how to find out the Synaptics model it is, and/or figure out if it would be expected (or not) to support two- finger scrolling? Any advice will be appreciated, thanks in advance! Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- I can do all things through Christ who strengthens me. ------------------------------ Philippians 4:13 -------------------------------

2 4

sssd ldap_user_search_base filters with '#' characters in names
by James Pearson 16 Nov '18

16 Nov '18

I'm trying to craft an ldap search filter for use with ldap_user_search_base in sssd.conf which is using Actice Directory (AD) as the back end on CentOS 7 clients The filter looks for users that are memberOf a particular group - however, the group name start with a '#' character - i.e. in AD, the group name is listed as something like '#ABC XYZ' But when I set ldap_user_search_base to something like: ldap_user_search_base = OU=Users,DC=Example,DC=com?subtree?(memberOf=CN=#ABC XYZ,OU=Groups,DC=Example,DC=com) then 'getent passwd user' fails to return anything (for 'user' that is in that group) However, when using the above syntax with a group name that doesn't start with a '#' character, then things work as expected When I use ldapsearch, it reports that the user is a memberOf: memberOf: CN=\#ABC XYZ,OU=Groups,DC=Example,DC=com But using the '\' in sssd.conf for the search filter cause sssd to error with 'Invalid search filter' in the logs Escaping the Escape ('\\') also gives 'Invalid search filter' Does anyone know how to 'escape' special characters in search filters in sssd.conf ? Thanks James Pearson

1 1

Continuous Release (CR) Repository has been released for CentOS Linux 7.6.1810 for X86_64, i386, armhfp, aarch64, power9, ppc64le
by Johnny Hughes 16 Nov '18

16 Nov '18

We have pushed the CR repository for CentOS Linux 7.6.1810 for following architectures: x86_64 i386 armhfp aarch64 power9 ppc64le We are currently still working on the ppc64 / ppc architecture as we are having issues with some of the 32bit ppc mulitlib builds. CR is basically the packages that will update your install from CentOS Linux 7.5.1804 to 7.6.1810, minus the centos-release rpm and the anaconda rpms. What we will do now is take these packages and create the new install tree and install media, then test those and finally release them as the official CentOS 7.6.1810 release. This process typically takes about 2 weeks from the CR release .. at which time CentOS Linux 7.6.1810 becomes the default release. If you would like to try this release early, see the CR information on the CentOS wiki: https://wiki.centos.org/AdditionalResources/Repositories/CR We are also working on the Release Notes for CentOS Linux 7.6.1810 on the wiki .. you can see those here: https://wiki.centos.org/Manuals/ReleaseNotes/CentOS7.1810 Thank You, Johnny Hughes

1 0

Where is centos6.x kernel git repo
by wuzhouhui 16 Nov '18

16 Nov '18

Hi, I following the steps described in https://wiki.centos.org/Sources to get centos7.x kernel repo. But I'm wondering how to get centos6.x kernel repo. Because when checkout branch 'c6' and found that there is nothing. Thanks

2 1

where to download kernel-3.10.0-693.17.6.el7 and kernel-devel-3.10.0-693.17.6.el7
by qw 16 Nov '18

16 Nov '18

Hi, I check the following link : http://vault.centos.org/7.4.1708/updates/x86_64/Packages/, and can't find kernel-3.10.0-693.17.6.el7 and kernel-devel-3.10.0-693.17.6.el7 rpm files. Where can I download the kernel from CentOS website? Thanks! Regards Andrew

3 2

CONFIG_RTC_SYSTOHC not set for CentOS kernels
by Anand Buddhdev 15 Nov '18

15 Nov '18

Hi folks, RHEL 7 documentation says that if either ntp or chrony is running on a system, then it will enable the kernel feature to sync system time to the hardware clock every 11 minutes. This needs the CONFIG_RTC_SYSTOHC option to be set. However, it looks like this option is not set for CentOS kernels: # fgrep CONFIG_RTC_SYSTOHC /boot/config-3.10.0-862.14.4.el7.x86_64 # CONFIG_RTC_SYSTOHC is not set This explains why on some of our servers, the hardware clock is out of sync with the system time. Does anyone know why this option is not enabled for CentOS kernels? Regards, Anand

3 3

'date' format differences between CentOS 6 and 7 using the en_GB locale ?
by James Pearson 15 Nov '18

15 Nov '18

Just noticed that the output of 'date' is different between CentOS 6 and 7 when using the 'en_GB' locale - e.g.: CentOS 6: % LANG=en_GB date Thu Nov 15 11:42:46 GMT 2018 % LANG=en_US date Thu Nov 15 11:42:56 GMT 2018 CentOS 7: % LANG=en_GB date Thu 15 Nov 11:43:07 GMT 2018 % LANG=en_US date Thu Nov 15 11:43:11 GMT 2018 i.e. with LANG=en_GB on CentOS 7, the day and month are swapped when compared with CentOS 6 Any one know why the en_GB locale has changed between CentOS 6 and 7 ? Thanks James Pearson

2 2

CentOS Dojo @ FOSDEM
by Rich Bowen 14 Nov '18

14 Nov '18

We're delighted to announce the schedule, and registration, for the upcoming CentOS Dojo in Brussels, on February 1, 2019, the day before FOSDEM starts. Details are here: https://wiki.centos.org/Events/Dojo/Brussels2019 The schedule is still marked "Tentative" since I have not received confirmation from all of the speakers yet, but we're almost there. Registration is FREE, but we do ask that you register anyways, since it helps us with venue planning and catering. See you in Brussels! -- Rich Bowen - rbowen(a)redhat.com http://centos.org/ - @CentOSProject 859 351 9166

4 4

merging signatures to a pdf file
by Gregory P. Ennis 13 Nov '18

13 Nov '18

Everyone, I am working on a module with the use of pdktk that merges *.fdf data files with a *.pdf file for a filled out pdf form. I have the need to add a signature to the pdf form. Do any of you know of a way to make this happen? Thanks much!!! Greg Ennis

2 2

error creating output file /var/lib/logrotate/logrotate.status.tmp: File exists
by Carlos Lopez 13 Nov '18

13 Nov '18

Hi all, I have configured a specific logrotate task to rotate certain logs every hour and everytime this logrotate's task runs, I am receiving an email like this: Auto-Submitted: auto-generated Precedence: bulk X-Cron-Env: <LANG=en_US.UTF-8> X-Cron-Env: <LC_ALL=en_US.UTF-8> X-Cron-Env: <XDG_SESSION_ID=4502> X-Cron-Env: <XDG_RUNTIME_DIR=/run/user/0> X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Date: Tue, 13 Nov 2018 11:00:04 +0000 (UTC) Status: R error: error creating output file /var/lib/logrotate/logrotate.status.tmp: File exists In Redhat's bugzilla I have seen some reported bugs with the same behavior and apparently is solved with an update. But this CentOS 7 host is fully patched and error persists ... Any idea? Regards, C. L. Martinez

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss