Discuss

discuss@lists.centos.org

34758 discussions

Network Connection Card Problem?
by Jun Salen 11 Sep '07

11 Sep '07

Hi List, My Mail/Proxy server has from time to time refuse to accept accept network connection. If I restart the network service, the service will again start to accept connection but after some time will again refuse connection. I use CentOS 4.5 with Squid, DansGuardian, Postfix. Please can someone point me what are the possible cause of this. Thank you. junji aisalen.wordpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

1 0

Nautilus won't start
by Kenneth Porter 10 Sep '07

10 Sep '07

I've been running CentOS 5 since release on a couple of servers with few problems. Last night I tried it as a workstation for the first time. It booted up fine and I could log into X. I then ran pup to install all available updates and shut down afterwards to load the new kernel. (I use yum on the servers.) This morning I start up on the new kernel and after logging in at the Gnome prompt, I get a message that Nautilus can't start. I'm not an X guru, being mostly a server driver over ssh. What's the best way to debug this? (I have lots of experience debugging, just not with X.)

2 2

Re: [CentOS] How to upgrade WBEL4 to CentOS4?
by tdukes＠sc.rr.com 10 Sep '07

10 Sep '07

---- Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> wrote: > On Sat, 2007-09-08 at 01:03 -0400, Eric B. wrote: > > Hi, > > > > I've got a couple of servers that are running WBEL4 that I would like to > > upgrade to CentOS4. I noticed that there is a FAQ which explains how to > > upgrade WBEL3 to CentOS3, but haven't found anything similar for WBEL4. > > > > Are the instructions for the WBEL3 upgrade the same for WBEL4? Should I be > > doing something else instead? > > > > Any help would be greatly appreciated. I did this using those instructions some time back. Just substitute WBEL3 for WBEL4. The paths for the rpms were different is about the only thing if I remember correctly was what I had to change.

1 0

is there an apache limit on submit size for centos 4 and 5
by Jerry Geis 10 Sep '07

10 Sep '07

Is there a limit to the size of the form that apache will accept? I have a small import utility (not php - just straight cgi and C program). It will import smaller files. 350 Meg is the largest I successfully did. But a 6.5G file it will not do. Seems like the form does even submit. Is there a config option in apache that doesnt even accept it? I looked at /var/log/httpd/ error and access and nothing is there. Any ideas? Jerry

1 0

package manager
by Dan Dansereau 10 Sep '07

10 Sep '07

How do I force the package manager to re-install a package? Such as Development - > Development Tools -> G77 Or the entire Development tools package? The G77 Is missing - and when I ask it to install - it states that is already installed. Thanks Dan A. Dansereau

3 2

New RTL8111B Wiki Page
by Kirk Bocek 10 Sep '07

10 Sep '07

I've created a new CentOS wiki page for the Realtek RTL8111B and related NICs: http://wiki.centos.org/HardwareList/RealTekRTL8111b There's also a driver disk for CentOS 4.5 and 5.0. Kirk Bocek

1 0

KDE-Repos
by Timothy Kesten 10 Sep '07

10 Sep '07

Hi Folks, I'm verry impressed about CentOS 5. Verry stable und fast. And yes, I know, it's mostly used as a server system. Nevertheless, I'd like to use it as my Desktopsystem also. My question: what is your experience with the KDE-Repos? Is it dangerous to use it? Or is it reliable? Thx Timothy

3 4

Centos 4.5 clamav update error
by Lorenzo 10 Sep '07

10 Sep '07

Hi all, I have a problem updating clamav on my mail server: Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamav Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamd Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamav Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamd I'm using rpmforge repo on CentOS 4.5, everything else is up to date. I guess that there is a conflict with the currently available glibc.i686 (2.3.4-2.36) and the package providing rtld. Does anyone knows if there is a fix/workaround for that? Otherwise is it possible to setup exim to use clamd on a different server via tcp/ip? tia Regards -Lorenzo Quatrini

3 3

Installerror on installation Kaffeine on CentOS 5
by Timothy Kesten 10 Sep '07

10 Sep '07

Hi Folks, I've tried to install kaffeine on CentOS 5 but I get following error Transaction Check Error: file /usr/share/mimelnk/application/x-mplayer2.desktop from install of kaffeine-0.7.1-1.2.el5.rf conflicts with file from package kdelibs-3.5.4-11.el5.centos Any hints to solve this problem? Delete/rename /usr/share/mimelnk/application/x-mplayer2.desktop ? Thx Timothy

3 6

need help on second Ethernet port (eth1) point to point connect
by mcclnx mcc 10 Sep '07

10 Sep '07

I have two DELL servers with two Ethernet ports in it. Bith servers have CENTOS 4.5 installed. First Ethernet port connect to public Ethernet line and work correctly. Second Ethernet port I connect point-to-point as private Ethernet (cable direct connect without router or switch). Private Ethernet use IP asddress 1.1.1.1 and 1.1.1.2. I check "ifconfig -a" and both eth0 and eth1 are up and active. when I tried to ping another server use second port (private) and no response. Does anything I configure wrong? Thanks. ======== info === %ifconfig -a eth0 Link encap:Ethernet HWaddr 00:08:74:EA:54:64 inet addr:172.29.86.15 Bcast:172.29.85.255 Mask:255.255.255.0 inet6 addr: fe80::208:74ff:feea:5464/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:471 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:65669 (64.1 KiB) TX bytes:11847 (11.5 KiB) eth1 Link encap:Ethernet HWaddr 00:0E:2E:C8:B9:80 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:18 Base address:0x4c00 %ping 1.1.1.2 PING 1.1.1.2 (1.1.1.2) 56(84) bytes of data. >From 1.1.1.1 icmp_seq=1 Destination Host Unreachable >From 1.1.1.1 icmp_seq=2 Destination Host Unreachable >From 1.1.1.1 icmp_seq=3 Destination Host Unreachable --- 1.1.1.2 ping statistics --- 4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3015ms , pipe 3 %telnet 1.1.1.2 Trying 1.1.1.2... telnet: connect to address 1.1.1.2: No route to host ____________________________________________________________________________________ 杜絕網路駭客，保障帳號安全 - 馬上設定 Yahoo!奇摩安全圖章http://tw.info.yahoo.com/seal/index.html

7 10

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss