Discuss

discuss@lists.centos.org

34753 discussions

Firestarter on Centos 5
by Robert Moskowitz 17 Jul '07

17 Jul '07

I am looking into different firewall tools. Well, I am looking to turn my Centos notebook into a NAT box, so that I can plug my corp notebook into its ethernet, and get access through my Centos notebook's wireless connection. (yes the corp notebook has wireless, but they frown on us using it!) I have started with Shorewall via webmin. I suspect that since my main firewall is Astaro, I will figure out Shorewall. But in an earlier post to this list, there was a reference to Firestarter (http://www.fs-security.com/) Thing is there is no Redhat/Centos 5.0 rpm, only 4.x. Anyone out there know if it will work?

2 1

conga / luci not working in centos 5
by Shadow Lurker 17 Jul '07

17 Jul '07

I am trying to create a cluster in cent5 but keep running in bugs. First I ran into this bug: "A problem occurred when installing packages: failed to locate/execute module" http://bugs.centos.org/view.php?id=1931 and followed the following suggestions in the above thread: mv /etc/redhat-release /etc/redhat-release.orig echo "Red Hat Enterprise Linux Server release 5 (Tikanga)" > /etc/redhat-release This seemed to work but now I am experiencing another issue. Current Issue: I cannot create a cluster when the "Enable shared storage support" is checked. Conga appears to be trying to create the cluster as you get the "creating cluster message" then just bombs with the following error. "A problem occurred when installing packages: Failed to install packages" If I don't check the "enable shared storage support" the cluster is created and brought online. I need to get a cluster online with shared storage for gfs but these bugs are stopping me, could someone shed some insight on this. Thanks in advance!

1 0

Gnome Bluetooth Manager
by Robert Moskowitz 17 Jul '07

17 Jul '07

I installed: gnome-bluetooth.i386 0.7.0-10.2.el5 from the base repo It also installed (at least): gnome-bluetooth-libs.i386 0.7.0-10.2.el5 These show up in /var/log/yum.log interestingly they do not show up in /var/log/rpmpkgs My bluetooth mouse is now working. It was not before. But I do not see any bluetooth management stuff in gnome (http://live.gnome.org/BluetoothManager) What gives? Did I forget a step? The following bluetooth related rpms area also installed: in rpmpkgs: bluez-gnome-0.5-5.fc6.i386.rpm bluez-hcidump-1.32-1.i386.rpm bluez-libs-3.7-1.i386.rpm bluez-utils-3.7-2.el5.centos.i386.rpm bluez-utils-cups-3.7-2.el5.centos.i386.rpm in yum.log: Jul 16 17:02:23 (yumex) Installed: gnome-bluetooth-libs.i386 0.7.0-10.2.el5 Jul 16 17:02:30 (yumex) Installed: gnome-bluetooth.i386 0.7.0-10.2.el5 Jul 16 17:02:37 (yumex) Installed: nautilus-sendto-bluetooth.i386 0.7-5.fc6

1 0

Citrix Replacement
by Charles Yao 17 Jul '07

17 Jul '07

Hi Guys, What can I use as a replacement for Citrix for my apps? Charles

4 5

Wireless newtworking in CentOS 5
by Andrew Allen 16 Jul '07

16 Jul '07

Installed CentOS 5 on my Dell Inspiron 1501 laptop, hoping that it will be easier to set up wireless networking than it was in CentOS 4.4. But still sooooo difficult to get it working, mainly because there doesn't appear to be a driver pre-installed for this wireless card ((Dell wireless 1390 Mini PCI network card 802.11b/g). Do I still have to use ipw2200 and what is this anyway? - I really don't understand why it is so difficult to get wireless networking in CentOS 5 when it works like a dream in Windows XP (I have a dual boot system, but I'd much rather use linux!). I've tried modprobe ipw2200 and all the rest of it with no success - what am I doing wrong please? Thanks, Andy

6 9

Gnome Terminal and xterm problems
by Matt Shields 16 Jul '07

16 Jul '07

I've noticed this in CentOS 4 & 5 and Fedora 5 & 6. If I'm in Gnome desktop and using any of the terminal programs and I ssh into any server, the connection just hangs. Not drops, it just hangs and doesn't recover. These servers are all over the country on different ISPs in Tier1 datacenters. Some are in our office, so they are on the local lan. We have a mix of RHEL 3, 4 & 5 and CentOS 4 & 5 on the servers. If I'm using a windows computer with putty or SecureCRT this never happens, it only happens when I'm using any of our linux desktops or laptops. It doesn't matter if I'm in the office or at home (on comcast) or over at a friend's house (verizon dsl). This problem has been going on for at least two years and I'm finally fed up to the point where I might switch back to windows since 99% of my job is working while ssh'ed into servers. Anyone had similar problems? -matt

8 14

Rebuild Fedora Core 6 cmake rpm on CentOS 5
by Kanwar Ranbir Sandhu 16 Jul '07

16 Jul '07

Hi, I'm trying to build cmake on CentOS 5 from a Fedora Core 6 source rpm (I need it for another package I'm trying to build from a source rpm, xmlrpc-c). When I start the build, I get this error: error: Failed build dependencies: xmlrpc-c-devel is needed by cmake-2.4.6-3.el5.i386 Well, that's nuts. I can't build xmlrpm-c without cmake, but cmake won't build without xmlrpc-c-devel! I'm probably just going to try installing the Fedora Core 6 rpms on CentOS 5 to avoid this problem. But, how would one go about resolving a build problem like this? Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.20-1.2962.fc6 i686 GNU/Linux 11:47:54 up 1 day, 5:47, 3 users, load average: 0.09, 0.06, 0.04

2 3

upgrade my open ssl
by mailadmin＠baladia.gov.kw 16 Jul '07

16 Jul '07

Dear All, I have centos 4.5 final and when i installed it there is a openssl version openssl-0.9.7a-43.16 .. i need to upgrade it to openssl 0.9.8 .. also when i try to uninstall it it gives me a failed dependency errror actually i did a nodeps and uninstalled openssl ver 0.9.8 but when my sendmail was restatered compalined saying libssl.so.4 missing or error actually i found that thaere was libssl.so.6 in /lib directory. if i say yum update openssl or yum install openssl it searches the repositories and says nothin to do. How can i upgrade my openssl... apprecite if u can guide me thnks and regards simon

5 5

help compiling a package camserv
by Jerry Geis 16 Jul '07

16 Jul '07

I download camserv and did the usual ./configure and make make gives me an error: gcc -g -O2 -o camserv camconfig.o camserv.o filter.o main_loop.o picture_loop.o shm.o video.o -Wl,--export-dynamic ../libltdl/.libs/libltdlc.al -ldl ../common/libcommon.a -lnsl -ljpeg -lm /usr/bin/ld: errno: TLS definition in /lib64/libc.so.6 section .tbss mismatches non-TLS reference in camserv.o /lib64/libc.so.6: could not read symbols: Bad value collect2: ld returned 1 exit status What could that be from? I have never seen this error before? Jerry

2 1

Sybase 12.5.3 on CentOS 5
by Fabiano Caixeta Duarte 16 Jul '07

16 Jul '07

Folks, After installing CentOS 5, I installed a few Sybase dependencies such as compat-libstdc++-296 and libXp. Once Sybase was installed, I started the steps to create the Adaptative Server. When the wizard executes the dataserber binary it crashes with segmentation fault. Someone can give me some help on this? Does anyone have this working? Thanks in advance! -- Fabiano Caixeta Duarte Seção Técnica de Informática FEA-RP/USP ************************************ " DESISTIR é uma solução permanente para um problema temporário. " James MacArthur ************************************ _______________________________________________ CentOS-pt-br mailing list CentOS-pt-br(a)centos.org http://lists.centos.org/mailman/listinfo/centos-pt-br

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss