Discuss

discuss@lists.centos.org

34758 discussions

How to enable download via web browser with vsftpd?
by Indunil Jayasooriya 16 Mar '07

16 Mar '07

HI , I setup vsftp yesterday as a local user only mode. No anonymous was enabled. I set up this vsftpd on my machine running CentOS 4.4. its ip is 192.168.101.25. so when I login as ftp://192.168.101.25/ via web browser, I am promted the username as password. After inputing username and password, I can login successfully. Then I can download everything as usual. But I can not upload any data ? Why is that ? How to enable it via web browser? But, If I use command line mode, I can do both downloading (mget) and uploading (mput). pls see below. For downloading, [root@worldnet ftp]# ftp 192.168.101.25 Connected to 192.168.101.25. 220 Welcome to ftp.itabspl.com FTP service. 530 Please login with USER and PASS. 530 Please login with USER and PASS. KERBEROS_V4 rejected as an authentication type Name (192.168.101.25:root): ftpuser 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> hash Hash mark printing on (1024 bytes/hash mark). ftp> mget se* mget sendmail-8.13.8-2.CF.rhel4.i386.rpm? y 227 Entering Passive Mode (192,168,101,25,248,37) 150 Opening BINARY mode data connection for sendmail-8.13.8-2.CF.rhel4.i386.rpm (595955 bytes). ##################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### 226 File send OK. 595955 bytes received in 0.3 seconds (1.9e+03 Kbytes/s) mget sendmail-cf-8.13.8-2.CF.rhel4.i386.rpm? y 227 Entering Passive Mode (192,168,101,25,146,101) 150 Opening BINARY mode data connection for sendmail-cf-8.13.8-2.CF.rhel4.i386.rpm (313961 bytes). ################################################################################################################################################################################################################################################################################################################## 226 File send OK. 313961 bytes received in 0.048 seconds (6.4e+03 Kbytes/s) mget sendmail-devel-8.13.8-2.CF.rhel4.i386.rpm? y 227 Entering Passive Mode (192,168,101,25,62,65) 150 Opening BINARY mode data connection for sendmail-devel-8.13.8-2.CF.rhel4.i386.rpm (122968 bytes). ######################################################################################################################## 226 File send OK. 122968 bytes received in 0.017 seconds (7.2e+03 Kbytes/s) mget sendmail-doc-8.13.8-2.CF.rhel4.i386.rpm? y 227 Entering Passive Mode (192,168,101,25,87,167) 150 Opening BINARY mode data connection for sendmail-doc-8.13.8-2.CF.rhel4.i386.rpm (655898 bytes). ################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################ 226 File send OK. 655898 bytes received in 0.15 seconds (4.2e+03 Kbytes/s) ftp> bye 221 Goodbye. For uploading, [root@worldnet ftp]# ftp 192.168.101.25 Connected to 192.168.101.25. 220 Welcome to ftp.itabspl.com FTP service. 530 Please login with USER and PASS. 530 Please login with USER and PASS. KERBEROS_V4 rejected as an authentication type Name (192.168.101.25:root): ftpuser 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> hash Hash mark printing on (1024 bytes/hash mark). ftp> mput fedora* mput fedora-usermgmt-0.7-2.noarch.rpm? y 227 Entering Passive Mode (192,168,101,25,254,195) 150 Ok to send data. ####### 226 File receive OK. 7481 bytes sent in 0.0003 seconds (2.4e+04 Kbytes/s) mput fedora-usermgmt-setup-0.7-2.noarch.rpm? y 227 Entering Passive Mode (192,168,101,25,252,65) 150 Ok to send data. ##### 226 File receive OK. 5593 bytes sent in 0.00056 seconds (9.8e+03 Kbytes/s) mput fedora-usermgmt-shadow-utils-0.7-2.noarch.rpm? y 227 Entering Passive Mode (192,168,101,25,180,225) 150 Ok to send data. ###### 226 File receive OK. 6454 bytes sent in 0.00054 seconds (1.2e+04 Kbytes/s) ftp> bye 221 Goodbye. That means both downloading and uploading work fine with command line mode. But via web browser, I only can download, but no uploading is possible? Why ? How can I solve this issue? -- Thank you Indunil Jayasooriya

4 5

CentOS 5 Beta Dual Boot Problem
by Styma, Robert E (Robert) 16 Mar '07

16 Mar '07

To test CentOS 5, I loaded from DVD adding it to a system at home running Fedora Core 7 T2. Partition Layout is: /dev/hda1 - / for the RH7T2 system /dev/hda2 - /home /dev/hda3 - swap /dev/hda4 - extended /dev/hda5 - / for CentOS 5 The system loaded cleanly and gave me the opportunity to tell grub about the other system. CentOS boots fine. Grub Stage 2 will show me both systems. However, If I choose the FC7T2 system I get the following output: --------------------------------------------------------- Booting 'FC7T2' rootnoverify(hd0,0) chainloader +1 Error 13: Invalid or unsupported executable format --------------------------------------------------------- The CentOS grub.conf on /dev/hda5 looks like: #: cat /boot/grub/grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You do not have a /boot partition. This means that # all kernel and initrd paths are relative to /, eg. # root (hd0,4) # kernel /boot/vmlinuz-version ro root=/dev/hda5 # initrd /boot/initrd-version.img #boot=/dev/hda default=0 timeout=10 splashimage=(hd0,4)/boot/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-1.2747.el5) root (hd0,4) kernel /boot/vmlinuz-2.6.18-1.2747.el5 ro root=LABEL=/1 quiet crashkernel=64M@16M initrd /boot/initrd-2.6.18-1.2747.el5.img title FC7T2 rootnoverify (hd0,0) chainloader +1 --------------------------------------------------------- Any clues on how to fix this? Note, I am posting to both groups since I follow both and cannot figure out which is the better choice.

3 3

CentOS and Atheros
by John Summerfield 16 Mar '07

16 Mar '07

What's the easiest path to having my Atheros wireless cards supported, particularly in C5? In the past, I've chosen to download source and build my own, but that's become a little tiresome. At one point, OpenSUSE was the easy option, but since 10.1 it's dropped madwifi. -- Cheers John -- spambait 1aaaaaaa(a)coco.merseine.nu Z1aaaaaaa(a)coco.merseine.nu Please do not reply off-list

3 8

CentOS 5.0 Release ???
by Gregory P. Ennis 15 Mar '07

15 Mar '07

Looks like RedHat released 5.0 on schedule. Does anyone have an idea when CentOS 5.0 will be ready? I would also like to thank the CentOs team for what they are doing...... Thank you!!!!!!! Greg Ennis

3 3

Default 4.4 kernel and NTFS?
by Scott R Ehrlich 15 Mar '07

15 Mar '07

I just installed Centos 4.4 and performed a Yum update to freshen all out-of-date files. I also have two IDE drives that are NTFS partitioned, but noticed they are not seen by the kernel. I visit /usr/src/kernels/2.6.9-42.EL-i686 and copy the Makefile.bak to Makefile and run make xconfig. Reviewing the supported filesystems, ntfs is not selected. Any reason why not? What is the easiest and safest way to get ntfs support? I could just download and compile the latest kernel, but there must be an easier, and just as safe, method for installing one simple option. Thanks. Scott

3 2

SASacct
by MailLists Listas 15 Mar '07

15 Mar '07

Hey guys, I have a little problem. i'm running a CentOS 4.4 (Final) (Linux 2.6.9-42.0.10.EL) box. So, i installed SASacct (http://rousse.pm.org/sasacct/) for accouting the traffic of my hosts. But it dont make the graphics/images of utilization. The libs, rrdtool, perl are all installed. I just tested with rpm based rrdtool and Tarball, but no success. The firewall is ok: Counters reset Wed Mar 14 06:22:24 BRT 2007 Chain SASACCT (2 references) pkts bytes target prot opt in out source destination 256 28760 all -- * * 192.168.1.102 0.0.0.0/0 337 26841 all -- * * 0.0.0.0/0 192.168.1.102 sasacct.plx and htmlmaker.plx run without problens and the .rrd files was created: [root@domain ~]# ls -l /var/log/sasacct/ -rw-r--r-- 1 root root 16348 Mar 14 11:20 192.168.1.102 -rw-r--r-- 1 root root 188744 Mar 14 11:20 192.168.1.102.rrd The "http://localhost/cgi-bin/sasacct.cgi" works, but only the "totals", when ticked "Generate graphics for the selected period" the graphics dont appear/are not created. No images: [root@vcs ~]# ls -l /var/www/html/sasacct/ -rw-r--r-- 1 apache apache 1619 Mar 14 11:35 192.168.1.102.html -rw-r--r-- 1 apache apache 3133 Mar 14 11:35 index.html -rw-r--r-- 1 apache apache 1584 Mar 12 10:53 poweredbysa.gif -rw-r--r-- 1 apache apache 1875 Mar 12 10:53 salogo.gif Some idea? Thanks any help. Thanks in advance. []s hophet.

2 2

Can't create users and groups
by Mário Gamito 15 Mar '07

15 Mar '07

Hi, I'm making a qmail RPM. All goes well, except that the users and groups are not being created. And they must be before running "make setup check". I've tried all locations in the spec file, but nothing :( Following my signature is the relevant part of the spec file. Any help would be appreciated. Warm Regards -- :wq! Mário Gamito %description The most powerful MTA in the whole world. %prep %setup -q %build patch -p1 < qmail-ldap-1.03-20060201.patch cp files/Makefile . cp files/dirmaker . cp qmail.schema /etc/openldap/schema mkdir -p /var/qmail/ mkdir /var/log/qmail mkdir /var/log/qmail/qmail-send mkdir /var/log/qmail/qmail-smtpd mkdir /var/log/qmail/qmail-popup groupadd nofiles useradd -g nofiles -s /bin/false -d /var/qmail/alias alias useradd -g nofiles -s /bin/false -d /var/qmail qmaild useradd -g nofiles -s /bin/false -d /var/qmail qmaill useradd -g nofiles -s /bin/false -d /var/qmail qmailp groupadd qmail useradd -g qmail -s /bin/false -d /var/qmail qmailq useradd -g qmail -s /bin/false -d /var/qmail qmailr useradd -g qmail -s /bin/false -d /var/qmail qmails chown -R root.qmail /var/qmail/ chown -R qmaill.qmail /var/log/qmail/ chmod 2700 /var/log/qmail/* mkdir -p /var/qmail/supervise/qmail-send/log mkdir -p /var/qmail/supervise/qmail-smtpd/log mkdir -p /var/qmail/supervise/qmail-popup/log echo "vmail:*:11184:2110::/var/qmail/maildirs/:/bin/true" >> /etc/passwd echo "vmail::2110" >> /etc/group mkdir /var/qmail/maildirs chown -R vmail.vmail /var/qmail/maildirs make setup check %install ./config-fast mail.sincity.lan

3 2

[Centos 5] minimum RAM required to install : 1GB ?
by Martin Hamant 15 Mar '07

15 Mar '07

Hi, From the release notes i can read : "Note that the minimum RAM required to install Red Hat Enterprise Linux 4.92 has been raised to 1GB; the recommended RAM is 2GB. If a machine has less than 1GB RAM, the installation process may hang." Is it a joke/mistake ? :-O 1GB !!! I tested installation process with 256M / Celeron 600, seems to work ...) -- Martin

7 7

What is the port of Bandwidthd ?
by Indunil Jayasooriya 15 Mar '07

15 Mar '07

Hi, I am running Bandwidthd on CentOS 4.4. (http://bandwidthd.sourceforge.net) Box running Bandwidthd network monitoring tool is behind a Firewall (iptables). My firewall has 3 network cards. One card has a real ip (live ip). That is eth0 - pls assume it is 1.2.3.4 . Pls assume router is 1.2.3.5. eth1 is for DMZ. Its ip is 192.168.100.3 eth2 is LAN . its ip is 192.168.101.254. Box running Bandwidthd network monitoring tool is behind this LAN. Its ip is 192.168.101.35 . its gateway is ip address of firewall that is 192.168.101.254. It can go internet. That is the way I have set up my firewall. But, It can not graph as expected. For examples, if I ping from my pc to router, It does not show ICMP traffic. I downloaded a 38 mb file to my pc. It also does not show in bandwidthd graph. Why is that? What is the port that bandwidthd runs on? Here is my file, Pls have a lokk at it. [root@netmonitor etc]# cat /etc/bandwidthd.conf #################################################### # Bandwidthd.conf # # Commented out options are here to provide # documentation and represent defaults # Subnets to collect statistics on. Traffic that # matches none of these subnets will be ignored. # Syntax is either IP Subnet Mask or CIDR #subnet 10.0.0.0 255.0.0.0 #subnet 192.168.0.0/16 #subnet 172.16.0.0/12 #subnet 203.143.26.128/29 subnet 203.143.26.128 255.255.255.248 subnet 192.168.101.0 255.255.255.0 subnet 192.168.102.0 255.255.255.0 subnet 192.168.100.0 255.255.255.0 subnet 64.5.53.158 255.255.255.255 # Device to listen on # Bandwidthd listens on the first device it detects # by default. Run "bandwidthd -l" for a list of # devices. #dev "eth0" dev "eth0" ################################################### # Options that don't usually get changed # An interval is 2.5 minutes, this is how many # intervals to skip before doing a graphing run skip_intervals 0 #skip_intervals 1 #skip_intervals 3 # Graph cutoff is how many k must be transfered by an # ip before we bother to graph it #graph_cutoff 1024 graph_cutoff 1024 #Put interface in promiscuous mode to score to traffic #that may not be routing through the host machine. #promiscuous true promiscuous true #Log data to cdf file htdocs/log.cdf #output_cdf false output_cdf true #Read back the cdf file on startup #recover_cdf false recover_cdf true #Libpcap format filter string used to control what bandwidthd see's #Please always include "ip" in the string to avoid strange problems #filter "ip" filter "ip" #Draw Graphs - This default to true to graph the traffic bandwidthd is recording #Usually set this to false if you only want cdf output or #you are using the database output option. Bandwidthd will use very little #ram and cpu if this is set to false. #graph true graph true #Set META REFRESH seconds (default 150, use 0 to disable). #meta_refresh 150 meta_refresh 150 R u using this pkg ? I used before setting up my firewaal. The I showed graphs. But After the firewall, It can not show trafiic . Help needed? Soon... -- Thank you Indunil Jayasooriya

3 2

What is cached swap?
by Mike McCarty 15 Mar '07

15 Mar '07

Isn't cached swap somewhat an oxymoron? Why cache virtual? Am I misunderstanding this line from top? Swap: 524120k total, 80760k used, 443360k free, 73448k cached Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World Governments like the UN. This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that!

6 15

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss