Discuss

discuss@lists.centos.org

34753 discussions

[CentOS]Badness in i8042_panic_blink at drivers/input/serio/i8042.c: 992
by yogeshwar sonawane 18 Jan '07

18 Jan '07

Hi all, I am getting this error while kernel hangs. I am using CentOS 4.4 (x86_64) on Dual Opteron 4 way SMP machine. After searching, i didn't found a sound answer. If anybody know the solution, plz let me know. Thanks in advance, Yogeshwar

3 2

Why slapd dying?
by Jun Salen 18 Jan '07

18 Jan '07

I am wondering why slapd in my CentOS 4.4s erver was unable to run. I already configure ldap to start at boot and when I issue command /sbin/service ldap start it is sucessfully started but again when I check the status etheir thru service or by netstat, it was stopped and not exist respectively. Is anybody encountered this. If you need some more info just let me know. Thanks. junji linux registered user #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

3 2

second send with right perl grep info - http://www.net-dns.org/ and perl-Net-DNS-0.48-1 upgrade direction needed
by R Lists06 17 Jan '07

17 Jan '07

Apologies for sending again, I did not include the correct perl grep the first time. Please forgive the temporary idiot and do not feed the trolls. :-) Greetings again :-) On this particular production centos 4 mail server system if I rpm -qa | grep perl I get... perl-Filter-1.30-6 newt-perl-1.08-7 perl-DateManip-5.42a-3 perl-libwww-perl-5.79-5 perl-XML-Encoding-1.01-26 perl-Time-HiRes-1.55-3 perl-CDB_File-0.94-1.2.el4.rf perl-Archive-Tar-1.30-1.el4.rf perl-URI-1.30-4 mod_perl-1.99_16-4.centos4 perl-HTML-Tagset-3.03-30 perl-Parse-Yapp-1.05-32 perl-XML-Parser-2.34-5 perl-XML-Dumper-0.71-2 perl-libxml-enno-1.02-31 perl-5.8.5-36.RHEL4 perl-IO-Zlib-1.04-1.2.el4.rf perl-Digest-SHA1-2.07-5 perl-Net-DNS-0.48-1 <------------------------- ***** perl-Statistics-Distributions-1.02-1.2.el4.rf perl-DBI-1.40-8 perl-HTML-Parser-3.35-6 perl-libxml-perl-0.07-30 perl-Digest-HMAC-1.01-13 perl-Parse-Syslog-1.03-1.2.el4.rf perl-Mail-SpamAssassin-3.1.7-1 perl-suidperl-5.8.5-36.RHEL4 right now I am focusing on perl-Net-DNS-0.48-1 and I want to figure out how to migrate to the latest version of Net::DNS on the http://www.net-dns.org/ website or learn if .59 has been rolled into the upstream and therefore to centos 4 or ??? i ask this as I am leary of upgrading production centos servers via CPAN I am looking to list wisdom to get some direction to help solve this one first please. I have researched the basics yet if I may please get a little help to continue going in the right direction I would be most grateful. I am sure I will want to add or upgrade some of the others as well. Ummm much of this is in relation to Spamassassin 3.1.7 issues Please chime in on creating a new RPM or using CPAN and any other ways that you folks are dealing with this pleasae? Thank you and kind regards - rh -- Robert - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

1 0

Easy upgrade path from beta5 to stable 5?
by Drew Weaver 17 Jan '07

17 Jan '07

Anyone know if you'll be able to simply upgrade from the beta of centos5 to the stable release? thanks, -Drew

4 5

Centos 4.4 install on ASUS A8V-VM does not find SATA drives
by Don Levey 17 Jan '07

17 Jan '07

Yes, I know someone last week asked a similar question (Problem with ASUS P5VD2-X X SATA II) but the only answer I saw on that thread was the equivalent of "I've heard it's bad so I won't do it." Unfortunately, that doesn't help me much. The BIOS does indeed recognise my two SATA hard drives, and I've got the BIOS set to "IDE" (which disables "hardware" RAID but not the SATA but itself). The install routine for Centos, however, does not seem to recognise that the drives are there (or even that the VIA bridge exists via auto search); if I try to manually select it I'm told it found a VIA VT86c100A Rhine-II PCI (via-rhine). Setting to AHCI does not seem to have an effect. I was hoping to use software RAID, and so didn't want to enable RAID on the motherboard. Does anyone have any suggestions as to how to either nudge the installation, or configure the hardware, to find the SATA drives so I can configure RAID? This is a NEW install on new drives, so it's not as if I've got an existing configuration I'm trying to augment. Thanks in advance, -Don

6 17

dhcpd errors
by Kanwar Ranbir Sandhu 17 Jan '07

17 Jan '07

Hello Everyone, I'm running a dhcp server on CentOS 4.4. It's providing IPs and remote booting for a number of thin clients. I've recently had problems rebooting a few thin clients. Here is the error I've been seeing: Jan 16 14:16:45 at01 dhcpd: DHCPRELEASE from 00:40:63:e5:71:4f specified requested-address. Jan 16 14:16:45 at01 dhcpd: DHCPRELEASE of 10.1.1.150 from 00:40:63:e5:71:4f via eth0 (not found) Depending on the thin client, the MAC and the IP changes. Otherwise, the errors are all the same. The effect on the thin client end is that it doesn't get an IP, and so it doesn't boot. The usual remedy is to unplug/plug-in the cat5 cable at the thin client, or to move the thin client to another network drop. This has me thinking there's a problem with the cat5 cabling (the office is going through a major renovation). But, I'm not 100% that is the case. It could be a problem with the dhcp server. I don't have easy access to that office - it's remote, and I'm only out there once every few months. It's why I want to make sure it's not a software problem first. At the moment I have no clue what's going on. My searching with google hasn't turned up anything useful. I'd appreciate any comments/suggestions. Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.18-1.2869.fc6 i686 GNU/Linux 14:18:36 up 3 days, 23:55, 2 users, load average: 0.42, 0.30, 0.25

4 8

intel pro 100 VE ethernet card
by Hiep Nguyen 17 Jan '07

17 Jan '07

Hi everyone, does any one know how high the packets (sent & received) will reach? i'm looking for a limit number (e.g. 99,999,999). and what happen when it reaches to the limit? Does it reset itself to 1 again? thanks

1 0

at boot disabling IRQ #193 then nothing
by Jerry Geis 17 Jan '07

17 Jan '07

All, I have a new box. Gigabyte motherboard AM2 sempron 3200+. CentOS installed fine, I rebooted after the install. It booted fine again. I ran yum -y update and now after that on boot it says Initializing hardware Storage network audio done Disabling IRQ #193 and then nothing. just sets there.... Any ideas on that??? Jerry

4 3

mount old LVM drive
by Chuck Wow 17 Jan '07

17 Jan '07

How can I mount an old LVM drive into a new system so I can view the old files? I want to mount it as /mnt/backup fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 19452 156143767+ 8e Linux LVM Disk /dev/sdb: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 13 104391 83 Linux /dev/sdb2 14 19452 156143767+ 8e Linux LVM when I do mount -t ext3 /dev/sdb2 /mnt/backup mount: wrong fs type, bad option, bad superblock on /dev/sdb2, or too many mounted file systems any help would be greatly appreciated! Chuck

2 1

Dual Heads?
by Peter Serwe 17 Jan '07

17 Jan '07

I decided to blow out the FC2 installation I inherited on my workstation when I started here and installed CentOS-4.4-i386. Server side stuff I pretty much have down cold, but getting two heads on two seperate video cards doesn't seem to work for me. I'm using the built in Intel 865/810 card as primary, and an ATI Radeon 9200 PCI card as secondary. Initially, my system bios on this Dell 4600 was set to Auto for which card is primary. That made the ATI card primary. Configuring the 865 card as secondary, and I have the same monitor on both heads, didn't seem to do anything for me. Then, I set the onboard video as primary, went back into system-config-display and configured the ATI card as secondary, logout/login still nothing changed. I'm trying to get it to configure as 'spanning desktops', so I just have twice as much real estate, and ideally can drag in between. Anyone have suggestions? Also, in general, the wm is pretty bland, so suggestions to make it a little more fun would be good too. :) Peter -- Peter Serwe <peter at infostreet dot com> http://www.infostreet.com "The only true sports are bullfighting, mountain climbing and auto racing." -Earnest Hemingway "Because everything else requires only one ball." -Unknown "Do you wanna go fast or suck?" -Mike Kojima "There are two things no man will admit he cannot do well: drive and make love." -Sir Stirling Moss

5 9

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss