Discuss

discuss@lists.centos.org

5 participants
34752 discussions

Re: RE: [CentOS] UPS Batteries
by edukes＠alltel.net 25 Mar '06

25 Mar '06

> > From: Mark Schoonover <schoon(a)amgt.com> > Date: 2006/03/24 Fri PM 12:22:21 EST > To: 'CentOS mailing list' <centos(a)centos.org> > Subject: RE: [CentOS] UPS Batteries > > edukes(a)alltel.net <mailto:edukes@alltel.net> tapped at Friday, March 24, > 2006 6:21 AM: > > > Hello, > > > > This may be a really stupid question, but can a gel type marine > > battery be used in a UPS? > > > > Thanks > > > I don't think so. Gelcells are different than the sealed lead acid batteries > found in UPS's. They have different charging requirements, and will > discharge differently than SLAs. Probably best to purchase replacement > batteries from the manufacturer... > > HTH Thanks for the info!! Eddie

4 3

CentOS 4.3 Jigdo
by Maciej Żenczykowski 25 Mar '06

25 Mar '06

I've made rudimentary jigdo files available at: http://mirror.tcs.ii.uj.edu.pl/jigdo/ i386: bin1of4 bin2of4 bin3of4 bin4of4 CDs binDVD srcDVD x86_64: binDVD Usage requires replacing the [Servers] parts inside the jigdo files with an appropriate mirror (file:/, http://, ftp://) This should allow recreation of the above mentioned files from any complete set of their contents (a mirror or DVD from CDs or vice versa). (jigdo is available from dag/dries/rpmforge repo). Cheers, MaZe.

5 12

httpd not starting after 4.3 update
by Jerry Geis 25 Mar '06

25 Mar '06

On Thu, 2006-03-23 at 01:13 -0500, Jerry Geis wrote: >/ After updating to 4.3 I cant get httpd to startup. />/ I see no messages in /var/log/message other that httpd failed. />/ />/ I see no errors in /var/log/httpd/error_log />/ />/ there is mention in ssl_error_log that no RSA or DSA certificate is found. />/ I dont know what to do about that.I tried starting in the non fork mode />/ but all it does is give me a prompt no error message . />/ />/ Also of note I am having issue with sshd. It starts up but I cannot connect />/ to the machine. />/ />/ I have been at this for a couple hours now. trying anything... />/ />/ Jerry / >Please look hard at your selinux. I suspect that is where your problems >lie if it is turned on. Johnny and all, My selinux is turned off. doing rpm -qa | grep httpd does not show duplicate packages. Is there a way to "freshen" the new packages for 4.3. Kind of a way to reload the packages without SCRAPPING the partition and starting from scratch? just a thought. Is there someway to tell what httpd doesnt like? When I run httpd with options to check config files and things like that it runs an prints a couple lines and prints status OK. So the exe is running just not as a background process. Thanks Jerry

4 5

Is the unsupported kernel considered stable-ish?
by Troy Engel 25 Mar '06

25 Mar '06

I have a need to use the unsupported kernel for one feature only (AFP/Appletalk support). Never having had to use it before, I'm unsure of what's all in it other than reading it's config file. From those that do use it -- is it considered stable enough to use in lightweight production? I'm debating the use of it versus wasting my time rebuilding the normal kernel with AFP enabled. Seeing as how this is an underpowered machine (Duron 900/512mb), using a prebuilt would be nice. -te ps: why oh why did RH decide to disable this? a simple upgrade of a RH9 machine now turns ugly. :-/ Do they think nobody uses Appletalk anymore? WTH. -- Troy Engel | Systems Engineer Fluid, Inc | http://www.fluid.com

2 2

RE: [CentOS] UPS Batteries
by Mark Schoonover 24 Mar '06

24 Mar '06

edukes(a)alltel.net <mailto:edukes@alltel.net> tapped at Friday, March 24, 2006 6:21 AM: > Hello, > > This may be a really stupid question, but can a gel type marine > battery be used in a UPS? > > Thanks I don't think so. Gelcells are different than the sealed lead acid batteries found in UPS's. They have different charging requirements, and will discharge differently than SLAs. Probably best to purchase replacement batteries from the manufacturer... HTH Thanks! Mark Schoonover IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816 "Don't tell me I'm burning the candle at both ends, just tell me where to get more wax!"

2 1

evolution can't send/receive
by rado 24 Mar '06

24 Mar '06

on one of my boxes...all at once evolution can't pop the server..can't send or anything... any suggestions? thx John Rose ps...I have not upgraded to 4.3 so this is surely not an issue there

2 1

module kernel for adaptec 2110s in CenOS 4.2
by iagosineiro＠yahoo.es 24 Mar '06

24 Mar '06

Hi. I've used ghost for change the ide disk for an array of scsi in raid using an adaptec controller 2110s. Now when I boot it didn't boot correctly. Looking for in Internet (http://kbase.redhat.com/faq/FAQ_46_4969.shtm) I guest that I have to rebuild the initial ramdisk to contain the proper kernel modules for the adaptec controller. But what is the kernel module for 2110s in kernel 2.6.x? I also have to adding a line in /etc/modprobe.conf, but I don't know the format for that. Thanks in advance. Iago.

3 3

Transferring user quotas?
by Kai Schaetzl 24 Mar '06

24 Mar '06

Is there a way of transferring user quotas from one machine to another? Where does the quota get stored? Non of the scarce documentation for the quota commands tells this. Apparently it can't be in the aquota.* files since I can repquota without them. Or does it get saved in some humanly unreadable filesystem information? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

2 2

Evolution Updated RPM
by Brent DiNicola 24 Mar '06

24 Mar '06

I realize that the Evolution included with 4.3 is not really 2.0, but it is not 2.4/2.6 either. Has anyone out there tried or successfully updated Evolution to the 2.6 version (or even 2.4) on CentOS? The OS is doing great on the desktop, I am however trying to use a Scalix connector that relies on some major changes that were done around 2.4 version of Evolution and it's Data Server. I have done a bit of digging and so far, to update to Evolution 2.4+ you would need a newer form of glib2 installed, which at that point would be a core update. Anyone have any luck or advice on this? Perhaps someone got the Scalix connector working on older Evolution (which would be ok with me). Thanks Brent -- Brent DiNicola The Whitewolf of Imrryr <centos .AT. elric.net> http://www.elric.net Disclaimer: Any opinions expressed here are from my dog. Any liabilities fall to the dog.

2 1

Something keep modifying cups config
by Reuben D. Budiardja 24 Mar '06

24 Mar '06

Hello, I have the following line in my /etc/cups/mime.types uncommented : application/octet-stream so that Windows machine which can use the printer driver can print through the cups printer set up on a CentOS box. But something keep changing the file by commenting out the line. So sometimes printing from Windows would stop working and it the cups error_log I see: E [21/Mar/2006:12:58:34 -0500] print_job: Unsupported format 'application/octet-stream'! I [21/Mar/2006:12:58:34 -0500] Hint: Do you have the raw file printing rules enabled? All I need is usually just uncomment that line in /etc/cups/mime.types and restart cups. So I couldn't figure out what keeps changing the files. Am I not supposed to edit the file directly, or am I missing something else here ? Thanks for any help. RDB -- Reuben D. Budiardja Dept. Physics and Astronomy University of Tennessee, Knoxville, TN

5 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss