Discuss

discuss@lists.centos.org

5 participants
34752 discussions

RE: [CentOS] x windows dell inspiron 1200 setting for 1366x768
by Plant, Dean 22 Nov '05

22 Nov '05

Jerry Geis wrote: > I am attempting to setup a dell inspirons 1200 laptop > media accelerator 900 from intel is the chipset so I am using the i810 > driver. > In the default 1024x768 everything is fine. > > I am trying to setup the external port not the LCD to be 1366x768. > I added a modeline to xorg.conf of: > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "LCD Panel 1600x1200" > HorizSync 31.5 - 90.0 > VertRefresh 60.0 - 60.0 > ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 > 806 -hsync -vsync > ModeLine "1024x768" 54.2 1024 1048 1184 1344 768 771 777 > 806 -hsync -vsync > ModeLine "1366x768" 85.5 1366 1494 1624 1798 768 770 776 > 795 -hsync +vsync > Option "dpms" > EndSection > > There is a line in the log file of: > (II) I810(0): Monitor0: Using hsync range of 31.00-70.00 kHz > (II) I810(0): Monitor0: Using vrefresh range of 50.00-85.00 Hz > (II) I810(0): Not using mode "1366x768" (no mode of this name) > (II) I810(0): Not using built-in mode "1600x1200" (width too large for > virtual size) > (II) I810(0): Not using built-in mode "1280x1024" (width too large for > virtual size) > (1366x768,Monitor0) mode clock 100000MHz exceeds DDC maximum 110MHz > (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 110MHz > (II) I810(0): 6632 kBytes additional video memory is required to > > I looked at the specs of the media 900 and it does something like > 25XXx10XX > > What am I not setting up correctly to see the 1366x768? > > THanks so much, > > Jerry I had a similar problem trying to set 1400x1050 on a Siemens Fujitsu Laptop. The fix for me, was to use 915 resolution from http://www.geocities.com/stomljen/ as it seems the Intel video bios has a limited set of resolution modes Hope this helps Dean

2 1

pine rpm for centos 4
by Roger D Vargas 22 Nov '05

22 Nov '05

There is some pine rpm for release 4? Im too used to it and I dont like mutt. -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

12 19

cant swith to text mode consoles
by Roger D Vargas 22 Nov '05

22 Nov '05

After installing xfce I switched to runlevel 5 to have a graphic login. But The login box (and xfce) doesnt let me switch to text consoles with ctrl+alt+F key. Also, xfce is the desktop for root, but for normal user still is an ugly windows manager. -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

2 2

Re: [CentOS] [OT] Message-ID Threading w/Subject Append Example --WAS: pine rpm for centos 4
by Brian T. Brunner 22 Nov '05

22 Nov '05

Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> jlb17(a)duke.edu 11/22/05 11:29AM >>> \begin{sotto voce} I can't believe I'm jumping into a thread like this. \end{sotto voce} ***I can. On Tue, 22 Nov 2005 at 10:23am, Les Mikesell wrote > On Tue, 2005-11-22 at 09:52, Bryan J. Smith wrote: >>> Not all mail/news readers track exclusevly via Message-ID, >>> References and In-Reply-To headers. >> >> So in other words, they decide to snub decades of Internet >> standards. > > They are realistic about people's use of email. They hit > reply/reply-all to reply to the sender/group, not necessarily > to the content of the previous message, and they change > the subject line when it isn't relevant and they are changing Ah, so we ignore established standards based on users' stupidity. Good idea. *** The World Famous "Are You Sure" could/should ask these SU's, ***when the change the subject line in any way, whether they intend ***to make a new thread of just change the subject in the current thread. > the topic. Please resume this argument when you have taught > the rest of the world the value of the headers they can't Threading that *works* is the value that users would notice. ***Threading that *works* is the value that users would notice. > see and some way to get the address list from a message > without making an irrelevant In-Repy-To:. Yeah, because address books are *so* hard to use. I'm sorry, but making decisions based on Stupid User Tricks is about the worst policy I can imagine. That way lies madness. ***Or worse, imitates the Congress of the United States. *** My vote's with Bryan & Joshua... if only it counted... ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

1 0

32 bits software on 64 bits CentOS core
by Alex Yuner 22 Nov '05

22 Nov '05

Hello to everybody, it´s possible run 32 bits program on a 64 bits CentOS core?? --------------------------------- Correo Yahoo! Comprueba qué es nuevo, aquí http://correo.yahoo.es

4 3

x windows dell inspiron 1200 setting for 1366x768
by Jerry Geis 22 Nov '05

22 Nov '05

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 90.0 VertRefresh 60.0 - 60.0 ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync ModeLine "1024x768" 54.2 1024 1048 1184 1344 768 771 777 806 -hsync -vsync ModeLine "1366x768" 85.5 1366 1494 1624 1798 768 770 776 795 -hsync +vsync Option "dpms" EndSection There is a line in the log file of: (II) I810(0): Monitor0: Using hsync range of 31.00-70.00 kHz (II) I810(0): Monitor0: Using vrefresh range of 50.00-85.00 Hz (II) I810(0): Not using mode "1366x768" (no mode of this name) (II) I810(0): Not using built-in mode "1600x1200" (width too large for virtual size) (II) I810(0): Not using built-in mode "1280x1024" (width too large for virtual size) (1366x768,Monitor0) mode clock 100000MHz exceeds DDC maximum 110MHz (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 110MHz (II) I810(0): 6632 kBytes additional video memory is required to I looked at the specs of the media 900 and it does something like 25XXx10XX What am I not setting up correctly to see the 1366x768? THanks so much, Jerry

1 0

using xfce
by Roger D Vargas 22 Nov '05

22 Nov '05

I had to make a minimal install and now Im installing some packages I need. I decided to use xfce as desktop, but after install, I cant find a way to set is as preferred desktop environment. I try switchdesk xfce, but it says xfce is not installed. How can I set it? -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

4 5

Bad disk?
by Morten 22 Nov '05

22 Nov '05

Hi, I get the below from dmesg. The server seems to run fine, but it does worry me. What should I do? Other than take a backup.. :-) hda: dma_timer_expiry: dma status == 0x21 hda: DMA timeout error hda: dma timeout error: status=0xd0 { Busy } ide: failed opcode was: unknown hda: DMA disabled ide0: reset: success hda: dma_timer_expiry: dma status == 0x21 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11242764, high=0, low=11242764, sector=11242760 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11242760 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11435969, high=0, low=11435969, sector=11435968 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11435968 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11435269, high=0, low=11435269, sector=11435264 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11435264 hda: dma_timer_expiry: dma status == 0x21 hda: DMA timeout error hda: dma timeout error: status=0xd0 { Busy } ide: failed opcode was: unknown hda: DMA disabled ide0: reset: success hda: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown ide0: reset: success hda: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown ide0: reset: success hda: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 31873944 hda: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hda: DMA disabled hda: drive not ready for command ide0: reset: success

7 12

Vsftpd + ssl
by Thomas E Dukes 22 Nov '05

22 Nov '05

Hello, Does anyone have this working? I have been looking for a couple of hours trying to find docs on how to set this up and so far the only thing I have found is how to enable ssl in vsftpd.conf. TIA

2 3

x windows setting up laptop external monitor atdifferent resolution than LCD
by Jerry Geis 22 Nov '05

22 Nov '05

On 11/22/05, Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ I need to setup my laptop external monitor at 1366x768 while my />/ LCD is only 1024x768. Is this done by dual head selections in the />/ display configuration? / Setting up dual head machine. You can view an artcile on this at www.pcquest.com they carried this a few months back and you can search the archives from the search box. HTH and please report back success. -- Sudev Barar Learning Linux --- I was looking at dual head under the display settings menu - however, when I select my settings and click OK - NOTHING HAPPENS. The screen stays there and does not go away. Jerry

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss