Discuss

discuss@lists.centos.org

5 participants
34752 discussions

Equivalent command or file
by Sam Drinkard 19 Sep '05

19 Sep '05

List, is there an equivalent on Linux as "watch" under FreeBSD, as well as the "snp" or snoop device that permits one to watch what is going on in another terminal? Yes there are privacy issues here, but in a home system with a couple of folks logged in trying to help with compiling stuff, it'd be nice to see what and how they are doing it. Thanks... -- Snowman

3 3

YUM error - are repositories down or something?
by Dave Gutteridge 19 Sep '05

19 Sep '05

Following advice on how to ensure that PHP and MySQL are on my machine and working correctly, I ran the following YUM command, with the subsequent error: [root@localhost ~]# yum install php php-mysql httpd mysqlclient10 mysql- server Setting up Install Process Setting up Repos http://apt.sw.be/redhat/el4/en/i386/dag/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (113, 'No route to host')> Trying other mirror. Cannot open/read repomd.xml file for repository: dag failure: repodata/repomd.xml from dag: [Errno 256] No more mirrors to try. Unless I am misunderstanding this error (which is quite likely), it seems to indicate that YUM can not reach the online repositories. Is that the case? Or does the problem reside on my end? Dave

5 8

plan of action?
by Robert 19 Sep '05

19 Sep '05

greetings, can someone(s) in authority please come up with a plan(s) of action in regards to this list medium? unfortunately this list has pretty much reached the point of no return and has become virtually useless. - rh -- Robert - Abba Communications Computers & Internet Sales/Service www.abbacomm.net

18 21

RE: [CentOS] YUM error - are repositories down or something?
by ABOKHALAF, Nassri Abdellatif 19 Sep '05

19 Sep '05

It seems your network is not working, and yum can't reach it's repositories. Make shore you can ping google.com or similar ! If not, check your network configuration. Nassri > > [root@localhost ~]# yum install php php-mysql httpd mysqlclient10 mysql- > server > Setting up Install Process > Setting up Repos > http://apt.sw.be/redhat/el4/en/i386/dag/repodata/repomd.xml: [Errno 4] > IOError: <urlopen error (113, 'No route to host')> > Trying other mirror. > Cannot open/read repomd.xml file for repository: dag > failure: repodata/repomd.xml from dag: [Errno 256] No more mirrors to > try. > > Unless I am misunderstanding this error (which is quite likely), it > seems to indicate that YUM can not reach the online repositories. Is > that the case? > > Or does the problem reside on my end? > > Dave

2 1

RE: [CentOS] Are PHP and MySQL running on my CentOS installation?
by ABOKHALAF, Nassri Abdellatif 19 Sep '05

19 Sep '05

Dave, What you need is php, msql & apache. You can install all the packages via using yum First execute yum install php php-mysql httpd mysqlclient10 mysql-server yum will resolve all dependences for you and probably will install some additional packages that you may need. If you have some packages already installed yum will tell you ! After installation, you will have to start several services: service httpd start service mysqld start to test that your webserver is running you can use your local browser httpd://localhost the best way to test php is to put a phpinfo.php file in your webserver document root usually in /var/www/html/. Do the following: vi /var/www/html/phpinfo.php insert in the first line: <? phpinfo(); ?> To test php do the following: httpd://localhost/phpinfo.php it will show you your php configuration. Nassri > -----Original Message----- > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf Of Dave Gutteridge > Sent: sexta-feira, 16 de Setembro de 2005 11:52 > To: centos(a)centos.org > Subject: [CentOS] Are PHP and MySQL running on my CentOS installation? > > > When I was installing CentOS, I noticed among the list of components > that PHP and MySQL were available. I made sure they were selected > because I develop a lot of web sites in PHP/MySQL, but I always do my > testing on the server side. I thought it would be kind of cool if I > could do the testing and development on my home machine. > > Which is a long way of saying that I think I have PHP/MySQL on my > machine, but have no idea what the heck to do with them. I mean, I can > script PHP and write queries for MySQL, but don't know anything about > their set up and installation. > > I wrote a small test HTML page with basic head and body information, and > simply this PHP in the body: > <?php > echo 'hello world': > ?> > And then opened it in FireFox. As expected, it didn't display anything. > > So I went to my trusty friend, Google, and asked about it. But it's one > of those cases where people seem to assume that it's already installed, > and if it's installed, it's already working. The PHP site itself says > "We do not distribute UNIX/Linux binaries. Most Linux distributions come > with PHP these days" and then not much else about running it. > > Am I going to find myself in a whole new world of confusing settings and > configurations if I try to get PHP working on my home machine? > > Dave > > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

11 13

Update/upgrade paths?
by Dave Laird 19 Sep '05

19 Sep '05

Good afternoon, Netizens... I have a number of 3.3 CentOS boxes that are quite a substantial distance from my home office. Short of physically going to those sites with a fresh set of CD's in hand, is there a method of remotely (via secure SSH) updating not only the files but the distribution as well, say to 4.1? Can you do a distribution update without using CD's? After a few weeks of experimenting with CentOS 4.1 I am really motivated to upgrade, if for no other reason than the fresh kernel and x.org, to name just a few. Dave -- Dave Laird (Dave(a)kharma.net) The Used Kharma Lot / The Phoenix Project An automatic & random fortune for the Minute: When I was little, I went into a pet shop and they asked how big I'd get. -- Rodney Dangerfield

5 6

RE: [CentOS] CentOS + GFS + EtherDrive
by Bowie Bailey 19 Sep '05

19 Sep '05

From: John Newbigin [mailto:jnewbigin@ict.swin.edu.au] > > Bowie Bailey wrote: > > > I am considering building a pair of storage servers that will be > > using CentOS and GFS to share the storage from a Coraid > > (SATA+Raid) EtherDrive shelf. Has anyone else tried such a setup? > > > > Is GFS stable enough to use in a production environment? > > > > There is a build of GFS 6.1 at http://rpm.karan.org/el4/csgfs/. Has anyone > > used this? Is it stable? > > > Will I run into any problems if I use CentOS 3.5 with it's GFS package to > > access a shared 5TB filesystem? > > > > I've been googling on this stuff off and on for a month now. I've found a > > bunch of conflicting and confusing information, but no clear answers. I've > > been kind of hoping that the new GFS 6.1 packages would be released while I > > was waiting... :) > > If you are using CentOS 3.5 then you want the el3 version of > GFS from here: > http://mirror.centos.org/centos-3/3/csgfs/ Right. The version I referenced would be for CentOS 4.1. > This is only GFS 6.0 but it works well. It looks like there are > lots of differences in 6.1 so I don't think it will work out of the > box on CentOS-3. > > I use GFS with GNBD and it works OK. Some of the nodes are 2 hops > away over the ethernet and they can sometimes be a bit slow. They > also lock up if the network goes down (no hardware fencing). What is GNBD? > The servers are in the same rack and work well together. > > I don't know the maximum filesystem size, or if your hardware is > supported but read the docs and it won't cost you anything to try it. Actually, I'm trying to determine workability before I spend money on the storage hardware, so it will cost me quite a bit to try it. Does anyone know the maximum filesystem size for CentOS 3.5 and GFS 6.0? Bowie

2 1

PXE Install CentOS-4.1
by John Newbigin 18 Sep '05

18 Sep '05

I am setting up CentOS-4.1 so I can install it via PXE Boot. I have everything working except the only packages available for selection is the Minimal set. The other groups are grayed out and can't be selected. Any ideas? I have also discovered that anaconda does not follow http redirects which is a bit annoying. John. -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin

4 4

postrotate error
by Manny Tau 18 Sep '05

18 Sep '05

Running CentOS 4 w/ BlueQuartz on a whitebox, and getting this cron.daily email: /etc/cron.daily/logrotate: error: error running postrotate script Is this a common problem? Thoughts on a typical solution? thnx, Manny

2 1

Promise SATA support
by Admin 18 Sep '05

18 Sep '05

Hi List I have a Promise SATA 300 TX ( NOT raid ) that do have RHEL4 driver, but this driver doesn’t work with CentOS4 Why? What can I do to get a driver that works? SATAII150/SATA300 TX series RHEL4 32-bit Driver http://www.promise.com/support/download/download2_eng.asp?productID=139&cate gory=all&os=100# This one should be for the correct 2.6 kernel, but it's no go I get this error: #sh install Promise SATA II 150/300 Driver Installation...failed No suitable driver found make sure driver disk or kernel version is right ***************************** MVH / Regards Jan Erik *****************************

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss