Discuss

discuss@lists.centos.org

5 participants
34752 discussions

Help rebuilding kernel get mount error on reboot
by Jerry Geis 20 Jun '05

20 Jun '05

I am attempting to recompile the kernel with the following steps. Install kernel-sourcecode rpm cd /usr/src/linux-2.6.9-11.EL cp /boot/config-2.6.9-11.EL .config make menuconfig Device Drivers -> Character Devices -> Serial Drivers change Max number of non legacy 8250_NR_UARTS to 36 make bzImage make modules_install make install Then after rebooting and selecting my -custom image from the above compile "mount: error 19 mounting ext3" "mount: error 2 mounting none" Then the machine stops of source. What happended? How do I get my custom kernel to boot. Jerry

4 14

OT raid controller
by John Newbigin 20 Jun '05

20 Jun '05

Sorry for an OT post, but given the recent discussions here re raid, I was wondering if anyone had any info on the ITE 8212 RAID controller (GigaRAID) This is a PATA HW RAID as found on the GigaByte GA-8I915P-PRO motherboard. (I can see an IC on the board labeled GigaRAID. Their manual claims that is has it's own CPU). I am not using it because I have SATA, but I am still curious about it's HW v SW raid ability and general linux support. They do provide a linux driver but the install instructions refer to /dev/had (obviously a typo so I don't think it is well tested or supported). I have tried google, but most references are to questions, now answers :( John. -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin

3 5

Re: [CentOS] Yum repository info
by Paul Vandenberg 19 Jun '05

19 Jun '05

Message: 4 Date: Sat, 18 Jun 2005 08:41:56 -0400 From: Phil Savoie <psavoie1783(a)rogers.com> Subject: [CentOS] Yum repository info To: CentOS(a)centos.org Message-ID: <200506180841.56114.psavoie1783(a)rogers.com> Content-Type: text/plain; charset="us-ascii" Hi All Would like to know where I could find repo info to be able to install frozen-bubble and/or supertux please. Thanks in advance, Phil ******************************************************************************************* I would just use the FC3 repos. They are binary compatible with CentOS 4 (RHEL 4). Go to http://dag.wieers.com

2 1

cannot kickstart after buying new SMC switch
by Robin Mordasiewicz 19 Jun '05

19 Jun '05

For some reason I cannot kickstart via pxe after installing a new SMC 48Port GigE switch. I swapped out an old hub to test and kickstarting still works with the old hub. Does anyone have any suggestions, --

2 2

error Centos4 image
by Juan Pablo Espino 18 Jun '05

18 Jun '05

Hello all! Actually I use dual boot PC with CentOS4 (kernel 2.6.9-11) and WinXP (HDD 20GB, 512MB, PentiumIII 800MHz), but I have the following problem doing the image with g4u ----BEGIN ERROR MESSAGGE---- wd0: (uncorrectable data error) 8951MB 1.59MB/s wd0d: error reading fsbn 18333440 of 18333440 - 18333567 (wd0 bn 18333440; cn 18187 tn 14 sn 62) retrying wd0: (uncorrectable data error) 8951MB 1.59MB/s wd0d: error reading fsbn 18333440 of 18333440 - 18333567 (wd0 bn 18333440; cn 18187 tn 15 sn 52) retrying ----END ERROR MESSAGGE---- I review the HDD partition with the g4u command "parts" g4u>parts wd0 Found NTFS partition; size 20482812 (10001MB), offset 63 skipping existing NTFS partition at slot e Found Linux EXT2 partition; size 192780 (94MB), offset 20482875 skipping existing Linux EXT2 partition at slot f Found swap partition; size 2040255 (996MB), offset 20675655 skipping existing swap partition at slot g Found Linux EXT2 partition; size 17157357 18377 (94MB), offset 22715973 skipping existing Linux EXT2 partition at slot i 9 partition # size offset fstype [fsize bsize cpg/sgs] d: 39876480 0 unused 0 0 #(cyl . 0-39559) e: 20482812 63 NTFS #(cyl . 0*-20320*) f: 192780 20482875 Linux Ext2 0 0 #(cyl. 20320*-20511*) g: 2040255 20675655 swap #(cyl . 20511*-22535*) i: 17157357 22715973 Linux Ext2 0 0 #(cyl . 22535*-39556*) I'm not sure about the mean of d partition. Somebody has made successful images of Centos4 with g4u?, I really apreciate any ideas. I posted a similar message to g4u but they didn't response yet. Thanks in advance, regards Juan P. Espino

2 2

SiL311x SataRaid (sata_sil)
by Dag Wieers 18 Jun '05

18 Jun '05

Hi, On my x86_64 system I have a SiL311x controller that can do RAID. If I configure my 2 identical disks in a RAID1 setup, I would expect to see only 1 block device on Linux. Still I see 2 block devices. Is this intentional, and if so, isn't that dangerous ? (i.e. writing to both disks at the same time) Anyone with an insight, please explain :) -- dag wieers, dag(a)wieers.com, http://dag.wieers.com/ -- [all I want is a warm bed and a kind word and unlimited power]

4 7

screen fonts
by Ryan 18 Jun '05

18 Jun '05

Does anyone know of any programs capable of fine tuning my screen display settings? I'm using the NVIDIA drivers, and everything is slightly blurry - regardless of how much (or little) I set anti-aliasing to.

4 10

Cron.daily
by Egypt.com 18 Jun '05

18 Jun '05

After update from CentOS 3.4 to 3.5 on 3 different boxes, I got the following message from each server ============================================ Subject: Cron <root@premiere> run-parts /etc/cron.daily > /etc/cron.daily/makewhatis.cron: > > > zcat: stdout: Broken pipe > > zcat: stdout: Broken pipe > > zcat: stdout: Broken pipe > > zcat: stdout: Broken pipe > .... ########Truncated due to size####################### ============================================ What does "zcat: stdout: Broken pipe" mean? Should i take any action? Thanx, Hameed

2 2

Yum Updates
by Jon 18 Jun '05

18 Jun '05

Hello I'bve just run yum update on one of our servers and there a alot of updates which were not there earlier in the week. Theses are: Gathering header information file(s) from server(s) Server: CentOS-3 - Base Server: CentOS-3 - Updates Finding updated packages Downloading needed headers Resolving dependencies Dependencies resolved I will do the following: [update: hotplug 3:2002_04_01-20.4.i386] [update: libstdc++ 3.2.3-52.i386] [update: devlabel 0.48.03-10.i386] [update: util-linux 2.11y-31.6.i386] [update: rpm 4.2.3-21_nonptl.i386] [update: binutils 2.14.90.0.4-37.i386] [update: ImageMagick 5.5.6-15.i386] [update: ImageMagick-c++ 5.5.6-15.i386] [update: initscripts 7.31.22.EL-2.centos.i386] [update: rpm-libs 4.2.3-21_nonptl.i386] [update: libstdc++-devel 3.2.3-52.i386] [update: openssl-devel 0.9.7a-33.15.i386] [update: libgcc 3.2.3-52.i386] [update: rpmdb-redhat 3.5-0.20050526.i386] [update: ImageMagick-devel 5.5.6-15.i386] [update: losetup 2.11y-31.6.i386] [update: vixie-cron 3.0.1-76_EL3.i386] [update: raidtools 1.00.3-8.EL3.i386] [update: quota 1:3.10-7.i386] [update: strace 4.5.9-2.EL3.i386] [update: procps 2.0.17-13.7.i386] [update: gcc-c++ 3.2.3-52.i386] [update: mkinitrd 3.5.13.3-1.i386] [update: iscsi-initiator-utils 3.6.2-7.i386] [update: pam-devel 0.75-64.i386] [update: usermode 1.68-5E.3.i386] [update: ntsysv 1.3.13.2-0.3.i386] [update: comps 3.5centos.0-0.20040916.i386] [update: mount 2.11y-31.6.i386] [update: hwdata 0.101.17-1.noarch] [update: rpm-devel 4.2.3-21_nonptl.i386] [update: gcc 3.2.3-52.i386] [update: kudzu 1.1.22.11-1.centos.0.i386] [update: mailx 8.1.1-31.EL3.i386] [update: grep 2.5.1-24.4.i386] [update: sysklogd 1.4.1-26_EL3.i386] [update: rmt 0.4b37-1E.i386] [update: laus 0.1-70RHEL3.i386] [update: authconfig 4.3.7-3.i386] [update: chkconfig 1.3.13.2-0.3.i386] [update: psmisc 21.3-2.i386] [update: jpackage-utils 1.5.38-1jpp_5rh.noarch] [update: mktemp 1.5-18.2.i386] [update: telnet 1:0.17-26.EL3.3.i386] [update: krb5-devel 1.2.7-44.i386] [update: dump 0.4b37-1E.i386] [update: lvm 1.0.8-12.2.i386] [update: popt 1.8.2-21_nonptl.i386] [update: psacct 6.3.2-31.rhel3.i386] [update: net-tools 1.60-20E.7.i386] [update: db4 4.1.25-8.1.i386] [update: ImageMagick-perl 5.5.6-15.i386] [update: bzip2-devel 1.0.2-11.EL3.1.i386] [update: cpp 3.2.3-52.i386] [update: laus-libs 0.1-70RHEL3.i386] [update: gzip 1.3.3-12.rhel3.i386] [update: centos-release 3:3-5.3.i386] [update: tzdata 2005f-1.EL3.noarch] [update: parted 1.6.3-29.5.i386] [update: libgcj 3.2.3-52.i386] [update: ncurses 5.3-9.4.i386] [update: sysreport 1.3.7.2-6.noarch] [update: telnet-server 1:0.17-26.EL3.3.i386] [update: bash 2.05b-41.4.centos.0.i386] [update: diskdumputils 1.0.1-4.i386] [update: rpm-python 4.2.3-21_nonptl.i386] [update: bzip2 1.0.2-11.EL3.1.i386] [update: wget 1.9.1-16.EL3.1.i386] [update: rpm-build 4.2.3-21_nonptl.i386] [update: krb5-libs 1.2.7-44.i386] [update: centos-yumcache 3.1-0.20050526.3.noarch] [update: pam_krb5 1.75-1.i386] [update: bzip2-libs 1.0.2-11.EL3.1.i386] [update: shadow-utils 2:4.0.3-23.08.i386] [update: lsof 4.63-4.1.i386] [update: pam 0.75-64.i386] [update: autofs 1:4.1.3-130.i386] [update: openssl 0.9.7a-33.15.i386] Is this right? regards Jon ___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com

3 2

Yum repository info
by Phil Savoie 18 Jun '05

18 Jun '05

Hi All Would like to know where I could find repo info to be able to install frozen-bubble and/or supertux please. Thanks in advance, Phil

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss