Discuss

discuss@lists.centos.org

2 participants
34758 discussions

Centos7 kickstart & pxe
by johan.vermeulen7＠telenet.be 05 Sep '16

05 Sep '16

Hello All, I'm trying to get kickstart to work through pxe. So far I've set up dhcp server, tftp and so on. But it seems at some point I always get stuck because the iso file is write-protected. I've tried remounting it rw, and I 've dd the iso first, I then get EM not a block device. Any help would be appreciated. Greetings, J.

3 4

/etc/sysconfig/network HOSTNAME settings
by Walter H. 04 Sep '16

04 Sep '16

Hello, I found different ways to define the hostname ... this HOSTNAME="host.domain.tld" or this: HOSTNAME="host" DOMAIN="domain.tld" what is the correct way? Thanks, Walter

3 2

How do I install uwsgi + python 3?
by Yuri Kanivetsky 04 Sep '16

04 Sep '16

Hi, >From what I can see, epel doesn't have python 3's pip. But when I install python35u (ius) and uwsgi-python-plugin3, uwsgi's python doesn't seem to find virtual env's packages. When I install python34u (ius) and uwsgi-plugin-python3, I get a conflict. Am I doing anything wrong? Regards, Yuri

1 0

Re: [CentOS] Networking/routing issue
by tdukes＠palmettoshopper.com 03 Sep '16

03 Sep '16

-------- Original Message -------- Subject: Re: [CentOS] Networking/routing issue From: Ulf Volmer <u.volmer(a)u-v.de> Date: Sat, September 03, 2016 5:47 am To: centos(a)centos.org On 09/03/2016 01:31 PM, TE Dukes wrote: > Centos 6.8 server eth0 > 192.168.1.110 > gateway 192.168.1.111 > eth1 > 192.168.1.111 > gateway > 192.168.1.100 > | > | > Switch > other computers and devices > gateway 192.168.1.110 > > I want to send all internal traffic through 192.168.1.110, all external > traffic through 192.168.1.111, then back through 192.168.1.110. As far as i understand, you have two interfaces in the same subnet. This is usually a bad idea. best regards Ulf Volmer A few of the examples I tried, had them on different subnets. I will change that and see what happens. Thanks

1 0

Networking/routing issue
by TE Dukes 03 Sep '16

03 Sep '16

Hello, I've been working on this for over a week. I don't think its working the way it should. Here's what I'm trying to do: I have a Windstream dsl router with wireless > 192.168.1.100 | | Centos 6.8 server eth0 > 192.168.1.110 > gateway 192.168.1.111 eth1 > 192.168.1.111 > gateway 192.168.1.100 | | Switch > other computers and devices > gateway 192.168.1.110 I want to send all internal traffic through 192.168.1.110, all external traffic through 192.168.1.111, then back through 192.168.1.110. I did an iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE Issues: Outside connectivity for all other computers and devices only works if eth0 is also connected to the router, server works Iptraf shows no traffic on eth1 Hope I haven't confused you as I have thoroughly confused myself. TIA TE Dukes

3 3

Re: [CentOS] Network manager cannot connet to the Internet
by sunyeping 03 Sep '16

03 Sep '16

Hi, Earl, Thank you very much for your prompt response.There is no output for "ip route"I don't know what is my default gateway and how to check it? And how to check the device that I am connecting to? Best regards. Yeping------------------------------------------------------------------From:Earl A Ramirez <earlaramirez(a)gmail.com>Time:2016 Sep 3 (Sat) 18:38To:CentOS mailing list <centos(a)centos.org>Subject:Re: [CentOS] Network manager cannot connet to the Internet What is the output of ip route show, can you ping your gateway, first see if you can ping your default gateway and if you can't you will have to check the device that your are connecting to. -- Kind Regards Earl Ramirez _______________________________________________ CentOS mailing list CentOS(a)centos.org https://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] CentOS Digest, Vol 140, Issue 1
by SUDHANSHU BHUTANI 02 Sep '16

02 Sep '16

On Thu, Sep 1, 2016 at 5:30 PM, <centos-request(a)centos.org> wrote: > Send CentOS mailing list submissions to > centos(a)centos.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.centos.org/mailman/listinfo/centos > or, via email, send a message with subject or body 'help' to > centos-request(a)centos.org > > You can reach the person managing the list at > centos-owner(a)centos.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CentOS digest..." > > > Today's Topics: > > 1. Re: CentOS 6 - logwatch report not in HTML format (Arun Khan) > 2. Re: NODEJS010-NPM is not getting installed due to dependency > errors on Custom Centos ISO installation (Jim Perrin) > 3. Re: CentOS 6 - logwatch report not in HTML format > (Alexander Farber) > 4. Re: CentOS 6 - logwatch report not in HTML format (Arun Khan) > 5. Re: CentOS 6 - logwatch report not in HTML format > (Alexander Farber) > 6. Re: group write permissions not being respected (Gordon Messmer) > 7. Re: CentOS 6 - logwatch report not in HTML format (Arun Khan) > 8. Re: group write permissions not being respected (Pat Haley) > 9. Re: group write permissions not being respected (m.roth(a)5-cent.us) > 10. Re: group write permissions not being respected (Pat Haley) > 11. Re: group write permissions not being respected (Chris Murphy) > 12. Perl Unsafe Module Path Handling Directory Traversal > Vulnerability ( CVE-2016-1238) (Sidharth Sharma) > 13. Bind Vulnerability CVE-2016-2775 (Sidharth Sharma) > 14. Re: "Windows" share issue; access via smb:// fails, "mount -t > cifs" works (Toralf Lund) > 15. Re: Bind Vulnerability CVE-2016-2775 (James Pearson) > 16. Re: Bind Vulnerability CVE-2016-2775 (Mike Burger) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 31 Aug 2016 07:11:11 -0700 > From: Arun Khan <knura9(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] CentOS 6 - logwatch report not in HTML format > Message-ID: > <CAHhM8gCz6SDqu8i5aHkUU58Sb91cHdNKUy=J_rYP25X48gk22Q(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > On Mon, Aug 29, 2016 at 10:24 PM, Alexander Farber > <alexander.farber(a)gmail.com> wrote: >> No, I mean there is sometimes a variable for mail format too: > > The HTML formatting is a logwatch option, invoked through the > logwatch.conf file. > > -- Arun Khan > > > ------------------------------ > > Message: 2 > Date: Wed, 31 Aug 2016 09:20:26 -0500 > From: Jim Perrin <jperrin(a)centos.org> > To: centos(a)centos.org > Subject: Re: [CentOS] NODEJS010-NPM is not getting installed due to > dependency errors on Custom Centos ISO installation > Message-ID: <a607d751-c5e7-91eb-9e81-b6cdb379ecfa(a)centos.org> > Content-Type: text/plain; charset=windows-1252 > > > > On 08/31/2016 03:48 AM, SUDHANSHU BHUTANI wrote: >> Hi, >> >> I have built successfully all the dependent packages of nodejs010 and npm. >> >> I have used following command:- >> *rpmbuild --define 'scl nodejs010' --bb SPEC/name_of_spec.spec* > > You should really use mock, so that you don't have unintended libraries > from your build host included/linked/required in the resulting rpm. Thanks Jim for responding. I tried with mock configuration, but, not sure, i am still getting the same errors via repoclosre tool:- This directory has got all the RPMs formed by mock. [root@localhost YUM_CISCO_RPMS]# repoclosure -r Cisco-yum-dep-check Reading in repository metadata - please wait.... Checking Dependencies Repos looked at: 1 Cisco-yum-dep-check Num Packages in Repos: 1515 package: nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(readable-stream) < 0:2 package: nodejs010-nodejs-cmd-shim-2.0.0-2.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(graceful-fs) < 0:4 package: nodejs010-nodejs-columnify-1.3.2-3.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(strip-ansi) >= 0:2.0.0 package: nodejs010-nodejs-fstream-ignore-1.0.2-1.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(minimatch) < 0:3 package: nodejs010-nodejs-gauge-1.2.2-3.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(has-unicode) < 0:2 package: nodejs010-nodejs-init-package-json-1.9.1-1.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(promzard) >= 0:0.3.0 package: nodejs010-nodejs-npm-registry-client-7.0.8-1.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(retry) >= 0:0.8.0 nodejs010-npm(request) >= 0:2.47.0 nodejs010-npm(concat-stream) >= 0:1.4.6 package: nodejs010-nodejs-which-1.2.0-1.el7.centos.noarch from Cisco-yum-dep-check unresolved deps: nodejs010-npm(is-absolute) < 0:0.2 The only difference from my (for build of nodejs010-nodejs-which-1.2.0-1.el7.centos.noarch.rpm) build-log and http://cbs.centos.org/kojifiles/packages/nodejs010-nodejs-are-we-there-yet/… is following line:- *Requires: nodejs010-nodejs(engine) nodejs010-npm(delegates) nodejs010-npm(readable-stream)* - >> THIS IS FROM CBS mock log and following is my build log:- *Requires: nodejs010-nodejs(engine) nodejs010-npm(delegates) >= 0.1.0 nodejs010-npm(delegates) < 0.2 nodejs010-npm(readable-stream) >= 1.1.13 nodejs010-npm(readable-stream) < 2* I am not sure, why parsing of these version is defining a range, maybe its coming from package.json file. I feel, its related to nodejs010-build package which has root/usr/lib/rpm/nodejs010.req, i defined mock configuration like this:- config_opts['root'] = 'epel-7-x86_64' config_opts['target_arch'] = 'x86_64' config_opts['legal_host_arches'] = ('x86_64',) config_opts['chroot_setup_cmd'] = 'install @buildsys-build scl-utils-build nodejs010-build' Do they look good? Following is my build.log [sbhutani@localhost ~]$ cat nodejs-build/nodejs010- Display all 316 possibilities? (y or n) [sbhutani@localhost ~]$ cat nodejs-build/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.src.rpm/build.log Mock Version: 1.2.18 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'], chrootPath='/var/lib/mock/epel-7-x86_64/root'shell=FalseprintOutput=Falseenv={'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '}gid=135user='mockbuild'timeout=0logger=<mockbuild.trace_decorator.getLog object at 0x22e3390>uid=1000) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'] with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/nodejs-are-we-there-yet-1.0.4-1.el7.centos.src.rpm Child return code was: 0 Mock Version: 1.2.18 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'], chrootPath='/var/lib/mock/epel-7-x86_64/root'shell=FalseprintOutput=Trueenv={'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '}gid=135user='mockbuild'timeout=0logger=<mockbuild.trace_decorator.getLog object at 0x1772390>uid=1000) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'] with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.src.rpm Child return code was: 0 Mock Version: 1.2.18 ENTER ['do'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'], chrootPath='/var/lib/mock/epel-7-x86_64/root'shell=FalseprintOutput=Falseenv={'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '}gid=135user='mockbuild'timeout=0logger=<mockbuild.trace_decorator.getLog object at 0x142d390>uid=1000) Executing command: ['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'] with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '} and shell False Building target platforms: x86_64 Building for target x86_64 Wrote: /builddir/build/SRPMS/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.src.rpm Child return code was: 0 ENTER ['do'](['bash', '--login', '-c', u'/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'], chrootPath='/var/lib/mock/epel-7-x86_64/root'shell=Falseuid=1000env={'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '}gid=135user='mockbuild'timeout=0private_network=Truelogger=<mockbuild.trace_decorator.getLog object at 0x142d390>printOutput=False) Executing command: ['bash', '--login', '-c', u'/usr/bin/rpmbuild -bb --target x86_64 --nodeps /builddir/build/SPECS/nodejs-are-we-there-yet.spec'] with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'HOME': '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PS1': '<mock-chroot> \\s-\\v\\$ '} and shell False Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.cNqdgI + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf package + /usr/bin/gzip -dc /builddir/build/SOURCES/are-we-there-yet-1.0.4.tgz + /usr/bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd package + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + rm -rf node_modules + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iiP8RP + umask 022 + cd /builddir/build/BUILD + cd package + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IFmFuX + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64 ++ dirname /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64 + cd package + mkdir -p /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64/opt/rh/nodejs010/root/usr/lib/node_modules/are-we-there-yet + cp -pr package.json index.js /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64/opt/rh/nodejs010/root/usr/lib/node_modules/are-we-there-yet + /usr/lib/rpm/nodejs010-symlink-deps /opt/rh/nodejs010/root/usr/lib/node_modules + /usr/lib/rpm/find-debuginfo.sh --strict-build-id -m --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 /builddir/build/BUILD/package /usr/lib/rpm/sepdebugcrcfix: Updated 0 CRC32s, 0 CRC32s did match. + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/brp-scl-compress /opt/rh/nodejs010/root + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-scl-python-bytecompile /usr/bin/python 1 /opt/rh/nodejs010/root + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-java-repack-jars Processing files: nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.7DYIy5 + umask 022 + cd /builddir/build/BUILD + cd package + DOCDIR=/builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64/opt/rh/nodejs010/root/usr/share/doc/nodejs010-nodejs-are-we-there-yet-1.0.4 + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64/opt/rh/nodejs010/root/usr/share/doc/nodejs010-nodejs-are-we-there-yet-1.0.4 + cp -pr README.md /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64/opt/rh/nodejs010/root/usr/share/doc/nodejs010-nodejs-are-we-there-yet-1.0.4 + exit 0 Finding Provides: /usr/lib/rpm/nodejs010.prov Finding Requires(interp): Finding Requires(rpmlib): Finding Requires(verify): Finding Requires(pre): Finding Requires(post): Finding Requires(preun): Finding Requires(postun): Finding Requires(pretrans): Finding Requires(posttrans): Finding Requires: /usr/lib/rpm/nodejs010.req Provides: nodejs010-nodejs-are-we-there-yet = 1.0.4-1.el7.centos nodejs010-npm(are-we-there-yet) = 1.0.4 Requires(rpmlib): rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires: nodejs010-nodejs(engine) nodejs010-npm(delegates) >= 0.1.0 nodejs010-npm(delegates) < 0.2 nodejs010-npm(readable-stream) >= 1.1.13 nodejs010-npm(readable-stream) < 2 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64 Wrote: /builddir/build/RPMS/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yi6hbn + umask 022 + cd /builddir/build/BUILD + cd package + /usr/bin/rm -rf /builddir/build/BUILDROOT/nodejs010-nodejs-are-we-there-yet-1.0.4-1.el7.centos.x86_64 + exit 0 Child return code was: 0 [sbhutani@localhost ~]$ Can any one catch difference between my build.log and CBS build.log. If hhorak is on this mailing list who actually built this package on CBS, can help? Appreciate your inputs. >> >> Following is the list of RPMs cloned and built from GIT:- >> > > <snip> > > >> >> *However, when we copy these RPMS to our ISO, anaconda installer fails >> to install due to dependency errors:-* > > > You should use the 'repoclosure' utility to make sure that you have met > all the dependencies of packages in the repo on your iso. > > > >> How is it possible, to get these errors, how come packages are not >> satisfying minimum dependency for working of NPM? > > > repoclosure should tell you. You may be missing something scl related. > > >> >> If i do yumdownloader for all these above RPMs from repo: [centos-sclo-rh] >> : http://mirror.centos.org/centos/7/sclo/x86_64/rh/nodejs010/) then i >> get following RPMs without "centos" name:- > > > Correct. This is an rpm macro change. by default the 'centos' is added > in there. > > >> >> *If i copy paste above RPMS to my custom ISO, then anaconda >> successfully installs these packages, without any errors* > > > This would suggest something is wrong with your build. See previous > statement about using mock vs rpmbuild. > > >> *What is there is these already built RPMs (taken from repo: [centos-sclo-rh] >> : http://mirror.centos.org/centos/7/sclo/x86_64/rh/nodejs010/) which >> is not there in my built RPMS?* > > That's kind of up to you to figure out, since we can't see your custom > built ones. > > >> Any pointers for this, as we feel, there is some inconsistency in the >> version available on git.centos.org/git/rpms/<name_of_pkg>.git ? > > More likely it's in your build method. > > > -- > Jim Perrin > The CentOS Project | http://www.centos.org > twitter: @BitIntegrity | GPG Key: FA09AD77 > > > ------------------------------ > > Message: 3 > Date: Wed, 31 Aug 2016 16:58:17 +0200 > From: Alexander Farber <alexander.farber(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] CentOS 6 - logwatch report not in HTML format > Message-ID: > <CAADeyWiMVpHh=CDZ6zi_OEq+5HwysoqTAOABDnM4mkYeFDhxYA(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > logwatch is run as cronjob. > > On Wed, Aug 31, 2016 at 4:11 PM, Arun Khan <knura9(a)gmail.com> wrote: > >> On Mon, Aug 29, 2016 at 10:24 PM, Alexander Farber >> <alexander.farber(a)gmail.com> wrote: >> > No, I mean there is sometimes a variable for mail format too: >> >> The HTML formatting is a logwatch option, invoked through the >> logwatch.conf file. >> >> -- Arun Khan >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> https://lists.centos.org/mailman/listinfo/centos >> > > > ------------------------------ > > Message: 4 > Date: Wed, 31 Aug 2016 08:31:28 -0700 > From: Arun Khan <knura9(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] CentOS 6 - logwatch report not in HTML format > Message-ID: > <CAHhM8gDhhgRNb1C2rKRdE+v8w_fEhBmCvarf3MxO=njxL7w3-g(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > On Wed, Aug 31, 2016 at 7:58 AM, Alexander Farber > <alexander.farber(a)gmail.com> wrote: >> logwatch is run as cronjob. > > Let's take cron out of the picture. Invoking logwatch from an > interactive shell -- no joy. The report still goes out in text > format. > > -- Arun Khan > > > ------------------------------ > > Message: 5 > Date: Wed, 31 Aug 2016 17:59:44 +0200 > From: Alexander Farber <alexander.farber(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] CentOS 6 - logwatch report not in HTML format > Message-ID: > <CAADeyWiYQ_TNjZHZ9af2x3TM_Lq+U9LE+y4aheb6BXV_TBwGaQ(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > You should have provided more info initially. > > "goes out in text format" might mean several things. > > On Wed, Aug 31, 2016 at 5:31 PM, Arun Khan <knura9(a)gmail.com> wrote: > >> On Wed, Aug 31, 2016 at 7:58 AM, Alexander Farber >> <alexander.farber(a)gmail.com> wrote: >> > logwatch is run as cronjob. >> >> Let's take cron out of the picture. Invoking logwatch from an >> interactive shell -- no joy. The report still goes out in text >> format. >> >> -- Arun Khan >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> https://lists.centos.org/mailman/listinfo/centos >> > > > ------------------------------ > > Message: 6 > Date: Wed, 31 Aug 2016 09:50:45 -0700 > From: Gordon Messmer <gordon.messmer(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] group write permissions not being respected > Message-ID: <8d10f9b1-0ed9-0217-ae0e-726acd1d9a87(a)gmail.com> > Content-Type: text/plain; charset=windows-1252; format=flowed > > On 08/30/2016 03:01 PM, Pat Haley wrote: >> the owner of a directory can still write to that directory but any >> other member of the associated group cannot, even though the directory >> clearly has group write permissions set > > > Use "getfacl" on both the client and server side to view the complete > permission set. What do those look like? > > > > ------------------------------ > > Message: 7 > Date: Wed, 31 Aug 2016 10:00:42 -0700 > From: Arun Khan <knura9(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] CentOS 6 - logwatch report not in HTML format > Message-ID: > <CAHhM8gBBc+i9VH=eiGM+K7ePerQbv4Nraa5ck7YMEixrhbzaoQ(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > On Wed, Aug 31, 2016 at 8:59 AM, Alexander Farber > <alexander.farber(a)gmail.com> wrote: >> You should have provided more info initially. >> >> "goes out in text format" might mean several things. >> > > I don't know what you mean by "several things" > > In the context of logwatch the only options are HTML or TEXT. Please see my OP. > > Thanks for your assistance. > > -- Arun Khan > > > ------------------------------ > > Message: 8 > Date: Wed, 31 Aug 2016 13:11:09 -0400 > From: Pat Haley <phaley(a)mit.edu> > To: centos(a)centos.org > Cc: Steve Postma <SPostma(a)ztechnet.com> > Subject: Re: [CentOS] group write permissions not being respected > Message-ID: <8d59038f-3dbe-5bff-9673-fbada1d3f31c(a)mit.edu> > Content-Type: text/plain; charset=windows-1252; format=flowed > > > So far, those look the same > > client: > > [root@mseas FixOwn]# getfacl /gdata/bibliography/Work/GroupBib/trunk/ > getfacl: Removing leading '/' from absolute path names > # file: gdata/bibliography/Work/GroupBib/trunk/ > # owner: phaley > # group: mseasweb > # flags: -s- > user::rwx > group::rwx > other::r-x > > server: > > [root@mseas-data2 ~]# getfacl /gdata/bibliography/Work/GroupBib/trunk/ > getfacl: Removing leading '/' from absolute path names > # file: gdata/bibliography/Work/GroupBib/trunk/ > # owner: phaley > # group: mseasweb > # flags: -s- > user::rwx > group::rwx > other::r-x > > > On 08/31/2016 12:50 PM, Gordon Messmer wrote: >> On 08/30/2016 03:01 PM, Pat Haley wrote: >>> the owner of a directory can still write to that directory but any >>> other member of the associated group cannot, even though the >>> directory clearly has group write permissions set >> >> >> Use "getfacl" on both the client and server side to view the complete >> permission set. What do those look like? >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> https://lists.centos.org/mailman/listinfo/centos > > -- > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Pat Haley Email: phaley(a)mit.edu > Center for Ocean Engineering Phone: (617) 253-6824 > Dept. of Mechanical Engineering Fax: (617) 253-8125 > MIT, Room 5-213 http://web.mit.edu/phaley/www/ > 77 Massachusetts Avenue > Cambridge, MA 02139-4301 > > > > ------------------------------ > > Message: 9 > Date: Wed, 31 Aug 2016 14:04:28 -0400 > From: m.roth(a)5-cent.us > To: "CentOS mailing list" <centos(a)centos.org> > Subject: Re: [CentOS] group write permissions not being respected > Message-ID: > <b9abfd5a5a37f29bff085aae6174877f.squirrel(a)host290.hostmonster.com> > Content-Type: text/plain;charset=utf-8 > > Stupid question, and note I missed most of the earlier posts in this > thread: what are the permissions on the directory that this directory are > in? > > mark > > > > ------------------------------ > > Message: 10 > Date: Wed, 31 Aug 2016 15:06:25 -0400 > From: Pat Haley <phaley(a)mit.edu> > To: centos(a)centos.org > Subject: Re: [CentOS] group write permissions not being respected > Message-ID: <d9ac7e12-3283-ea9e-a5b0-5dcd8d27d87d(a)mit.edu> > Content-Type: text/plain; charset=windows-1252; format=flowed > > > For example the directory /gdata/bibliography/Work/GroupBib/trunk/ can > be written in by user phaley but not by other users who are member of > the group mseasweb. The directory has permissions > > [root@mseas ~]# ls -lh /gdata/bibliography/Work/GroupBib > total 12K > drwxrwsr-x 4 phaley mseasweb 4.0K Aug 30 12:31 trunk > > The parent directory (/gdata/bibliography/Work/GroupBib) has permissions > > [root@mseas ~]# ls -lh /gdata/bibliography/Work/ > total 8.0K > drwxrwsr-x 6 phaley mseasweb 4.0K Aug 30 14:01 GroupBib > > > > On 08/31/2016 02:04 PM, m.roth(a)5-cent.us wrote: >> Stupid question, and note I missed most of the earlier posts in this >> thread: what are the permissions on the directory that this directory are >> in? >> >> mark >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> https://lists.centos.org/mailman/listinfo/centos > > -- > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Pat Haley Email: phaley(a)mit.edu > Center for Ocean Engineering Phone: (617) 253-6824 > Dept. of Mechanical Engineering Fax: (617) 253-8125 > MIT, Room 5-213 http://web.mit.edu/phaley/www/ > 77 Massachusetts Avenue > Cambridge, MA 02139-4301 > > > > ------------------------------ > > Message: 11 > Date: Thu, 01 Sep 2016 03:38:11 +0000 > From: Chris Murphy <lists(a)colorremedies.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] group write permissions not being respected > Message-ID: > <CAJCQCtTfr6rvPGH7uMNzYE9-Q+BfZ784a5n=4S5NekA7O8VxAA(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Try booting with enforcing=0 and if that fixes it, you need to find out > what security label is needed for gluster. > > Chances are it's easiest to use -o context= mount option on the brick, but > if the brick is not exclusive to gluster you'll need chcon -R. > > If that's not it, maybe try the gluster client instead of using NFS. See if > you get a different result that narrows down what's going on. > > My vague recollection is for Samba, without the correct SELinux label, I > could neither read nor write. > > > Chris Murphy > > > ------------------------------ > > Message: 12 > Date: Thu, 1 Sep 2016 11:03:30 +0530 > From: Sidharth Sharma <sharma.sidharth86(a)gmail.com> > To: centos(a)centos.org > Subject: [CentOS] Perl Unsafe Module Path Handling Directory Traversal > Vulnerability ( CVE-2016-1238) > Message-ID: > <CAAQ4EFk7qgWvq=ZtSOugxsgQ1S54y8cFbiG33POQme8+cDrcSw(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hello Experts, > > When we can expect Security Update for Perl Vulnerability CVE-2016-1238 on > CentOS 6.8 and 7.2? > > -- > With Thanks & Regards: > Sidharth Sharma > > > ------------------------------ > > Message: 13 > Date: Thu, 1 Sep 2016 11:05:36 +0530 > From: Sidharth Sharma <sharma.sidharth86(a)gmail.com> > To: centos(a)centos.org > Subject: [CentOS] Bind Vulnerability CVE-2016-2775 > Message-ID: > <CAAQ4EF=2AeThtVjJitR3JHGhuunRJ4AZHiYDcrp4vcKFxUV=UQ(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hello Experts, > > When we can expect Security Update for Bind Vulnerability on Centos 6.8/7.2? > ISC BIND Lightweight Resolver Protocol Req Processing Dos Vulnerability: > CVE-2016-2775 > > -- > With Thanks & Regards: > Sidharth Sharma > > > ------------------------------ > > Message: 14 > Date: Thu, 1 Sep 2016 10:26:34 +0200 > From: Toralf Lund <toralf.lund(a)pgs.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] "Windows" share issue; access via smb:// fails, > "mount -t cifs" works > Message-ID: <2265d62b-32b6-6d51-5848-df84f5800723(a)pgs.com> > Content-Type: text/plain; charset="utf-8"; format=flowed > > On 30/08/16 10:00, Toralf Lund wrote: >> Hi, >> >> Is anyone here using smb:// URLs to access "Windows" shares? I've been >> doing this for a while with common file systems at work, and it used >> to work just fine. Then I while back, I started getting issues; I will >> now just keep getting asked for a password when I try to access >> something through smb://. I thought at first that this meant there had >> been some kind of change related to permissions on the shares, but now >> I find that I can mount them just fine using "mount -t cifs". > I found out a bit more about this - I believe that I have the issue > described here: > > http://community.netapp.com/t5/Network-Storage-Protocols-Discussions/samba-… > > In other words, the problem is that "SPNEGO" fails. If I add "client use > spnego = no" to /etc/samba/smb.conf, smbclient access works (I found > that I also got a problem there), but unfortunately, gvfs-mount still > doesn't. The debug output that I get if I run gvfsd on the command line > with "GVFS_DEBUG=1" and "GVFS_SMB_DEBUG=99" actually still report SPNEGO > errors, so it would appear that the smp.conf option is for some reason > ignored. In other words the question may be: > > How do I disabled SPNEGO for gvfs-mount? > > Also, the above suggest that whether this problem occurs depends on > whether "you have SMB signing turned on or not under the 'cifs' options > section", but it not clear to me what options exactly this refers to. > Anyone? > > Oh, and some other posts I found seem to indicate that mount.cifs > doesn't support SPNEGO yet, so I guess that's why a "normal" mount works. > > - Toralf > > >> >> In other words, I get: >> >> gvfs-mount smb://mydomain\;toralf.lund@theserver/myshare >> Password required for share myshare on theserver >> Password: >> Password required for share myshare on theserver >> Password: >> Password required for share myshare on theserver >> Password: >> >> [ I enter the correct password, but gvs-mount keeps asking... >> Behaviour is the same if I try to open the URL in the file manager >> instead. ] >> >> mount -t cifs -o user=toralf.lund,workgroup=mydomain >> //theserver/myshare /tmp_mnt/ >> Password: >> >> [ At this stage the filesystem is mounted, as long as I enter the >> correct password. ] >> >> Does anyone have any idea what is going on here? Why does the VFS >> mount fail when mount.cifs works on the same share? Is there a >> difference in the way authentication works, or something? Has there >> been a change to the smb support that might explain this? >> >> This is on a CentOS 6 x86_64 installation with all updates applied. >> >> - Toralf >> > > > > ------------------------------ > > Message: 15 > Date: Thu, 1 Sep 2016 08:34:08 +0000 > From: James Pearson <james-p(a)moving-picture.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] Bind Vulnerability CVE-2016-2775 > Message-ID: > <85C0B54E4752CA4F873E7C78CF0B26F5010FB3748D(a)LNDWSMBX01.ad.mpc.local> > Content-Type: text/plain; charset="us-ascii" > > Sidharth Sharma: >> >> When we can expect Security Update for Bind Vulnerability on Centos 6.8/7.2? >> ISC BIND Lightweight Resolver Protocol Req Processing Dos Vulnerability: > >CVE-2016-2775 > > See: > > https://access.redhat.com/security/cve/cve-2016-2775 > > James Pearson > > ------------------------------ > > Message: 16 > Date: Thu, 01 Sep 2016 07:45:04 -0400 > From: Mike Burger <mburger(a)bubbanfriends.org> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] Bind Vulnerability CVE-2016-2775 > Message-ID: <400e82588e4172b96a928e1e3aeef9e3(a)bubbanfriends.org> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > On 2016-09-01 4:34 am, James Pearson wrote: >> Sidharth Sharma: >>> >>> When we can expect Security Update for Bind Vulnerability on Centos >>> 6.8/7.2? >>> ISC BIND Lightweight Resolver Protocol Req Processing Dos >>> Vulnerability: >> >CVE-2016-2775 >> >> See: >> >> https://access.redhat.com/security/cve/cve-2016-2775 > > Ouch! > > Affected Packages State > Platform Package State > Red Hat Enterprise Linux 5 bind97 Will not fix > Red Hat Enterprise Linux 6 bind Will not fix > Red Hat Enterprise Linux 5 bind Will not fix > Red Hat Enterprise Linux 7 bind Will not fix > > -- > Mike Burger > http://www.bubbanfriends.org > > "It's always suicide-mission this, save-the-planet that. No one ever > just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 > > > ------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos > > > End of CentOS Digest, Vol 140, Issue 1 > **************************************

1 0

Re: [CentOS] group write permissions not being respected
by Chris Murphy 02 Sep '16

02 Sep '16

On Thu, Sep 1, 2016, 8:11 AM Pat Haley <phaley(a)mit.edu> wrote: > > For the enforcing=0, is that referring to SELinux? If so, we are not > running SELinux. > OK so neither that nor chcon nor context mount option apply. It's something else. > > On 08/31/2016 11:38 PM, Chris Murphy wrote: > > ---------------------------------------------------------------------------------------- > > Try booting with enforcing=0 and if that fixes it, you need to find out > > what security label is needed for gluster. > > ---------------------------------------------------------------------------------------- > For the enforcing=0, is that referring to SELinux? If so, we are not > running SELinux. > > ----------------------------------------------------------------------------------------- > > > Chances are it's easiest to use -o context= mount option on the brick, > but > > if the brick is not exclusive to gluster you'll need chcon -R. > > ----------------------------------------------------------------------------------------- > We aren't sure exactly what you mean by this second paragraph, can > you expand on this? Are these two exclusive options exclusive? We aren't > sure what you what you mean by "exclusive to gluster" > > ----------------------------------------------------------------------------------------- > > If that's not it, maybe try the gluster client instead of using NFS. See > if > > you get a different result that narrows down what's going on. > > > > My vague recollection is for Samba, without the correct SELinux label, I > > could neither read nor write. > > > > > > Chris Murphy > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > https://lists.centos.org/mailman/listinfo/centos > > -- > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Pat Haley Email: phaley(a)mit.edu > Center for Ocean Engineering Phone: (617) 253-6824 > Dept. of Mechanical Engineering Fax: (617) 253-8125 > MIT, Room 5-213 http://web.mit.edu/phaley/www/ > 77 Massachusetts Avenue > Cambridge, MA 02139-4301 > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos >

1 0

Centos v6.8 and double received bytes
by Steve Malenfant 02 Sep '16

02 Sep '16

I'm observing double the amount of "recv" bytes in latest Centos v6.8 with ixgbe 4.2.1-k. Anybody seeing the same? $ ethtool -i em1 driver: ixgbe version: 4.2.1-k $ uname -an Linux chndcdmid01.rd.ph.cox.net 2.6.32-642.4.2.el6.x86_64 #1 SMP Tue Aug 23 19:58:13 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Doing comparison on 2 days at same hour just to show the difference. This is an HTTP cache server, having higher RX than TX means something is bad... We don't rely much on the RECV side, but our graph showed a huge difference between upgrades. Before upgrade (v6.7, 4.0.1-k) : 07:00:01 PM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s 07:00:01 PM em1 3971.90 5384.15 14981.65 26376.80 0.00 0.00 0.00 07:10:01 PM em1 3918.26 5367.79 13136.21 25528.40 0.00 0.00 0.00 07:20:01 PM em1 3868.94 5273.08 11997.37 25155.92 0.00 0.00 0.00 07:30:01 PM em1 3895.50 5597.56 10851.74 28583.84 0.00 0.00 0.00 07:40:01 PM em1 3956.80 5706.12 12230.66 29553.73 0.00 0.00 0.00 07:50:01 PM em1 4016.39 5801.69 11957.35 29979.04 0.00 0.00 0.00 After upgrade (v6.8, 4.2.1-k) : 07:00:01 PM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s 07:00:01 PM em1 20857.40 8736.13 59710.07 35102.76 0.00 0.00 0.00 07:10:01 PM em1 19508.00 8429.40 58120.70 36036.64 0.00 0.00 0.00 07:20:01 PM em1 19128.20 8471.45 55502.07 37312.56 0.00 0.00 0.00 07:30:01 PM em1 19402.55 8329.93 53586.60 35386.52 0.00 0.00 0.00 07:40:01 PM em1 19188.27 8105.83 51463.72 33585.55 0.00 0.00 0.00 07:50:01 PM em1 19544.32 7843.08 49590.64 30981.99 0.00 0.00 0.00 Steve

1 0

Perl Unsafe Module Path Handling Directory Traversal Vulnerability ( CVE-2016-1238)
by Sidharth Sharma 01 Sep '16

01 Sep '16

Hello Experts, When we can expect Security Update for Perl Vulnerability CVE-2016-1238 on CentOS 6.8 and 7.2? -- With Thanks & Regards: Sidharth Sharma

3 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss