Thanks for the info.
brctl show virbr0 bridge name bridge id STP enabled interfaces virbr0 8000.525400fc34af yes virbr0-nic
brctl show virbr1 bridge name bridge id STP enabled interfaces virbr1 8000.5254009c3902 yes virbr1-nic
ip a s virbr0 3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 52:54:00:fc:34:af brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever
ip a s virbr1 5: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 52:54:00:9c:39:02 brd ff:ff:ff:ff:ff:ff inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 valid_lft forever preferred_lft forever
cat /proc/sys/net/ipv4/ip_forward 1
iptables -L FORWARD -v -n | egrep '(policy|virbr1)' Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
iptables -L FORWARD -v -n | egrep '(policy|virbr0)' Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
So looks like my IPTables is not correct.
What commands do you run for that ? Thanks,
Jerry