Dear All, I have configured Cluster Suite with 2 servers Server 1 : 192.168.13.110 IP Address and hostname is primary Server 2 : 192.168.13.179 IP Address and hostname is secondary Floating : 192.168.13.83 IP Address (Assumed by currently active server)
I have configured Ethernet Channel Bonding in Each Cluster Nodes and Channel Bonding Configuration Details are 1) Created bonding devices in "/etc/modprobe.conf" file alias bond0 bonding options bonding miimon=100 mode=1 2) Edit the "/etc/sysconfig/network-scripts/ifcfg-eth0 and ifcfg-eth1" configuration DEVICE=eth0 USERCTL= no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none
DEVICE=eth1 USERCTL= no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none 3) Created a network script for the bonding device is "/etc/sysconfig/network-scripts/ifcfg-bond0" DEVICE=bond0 USERCTL=no ONBOOT=yes NETMASK=255.255.255.0 GATEWAY=192.168.13.1 IPADDR=192.168.13.110 4) Reboot the system for the changes to take effect.
After i am rebooted both the server then cluster node becomes simplex and Services are started on both the nodes The cluster ouput in primary node
Member Status: Quorate
Member Name Status ----------- ------- --------- primary Online, Local, rgmanager secondary Offline
Service Name Owner (Last) State --------- -------- ----------------- -------- Service primary started
The cluster ouput in secondary node
Member Status: Quorate
Member Name Status ----------- ------- --------- primary Offline secondary Online, Local, rgmanager
Service Name Owner (Last) State --------- -------- ----------------- -------- Service secondary started
Before Ethernet Channel Bonding cluster services are active in one node and other nodes acts as passive node. But after Ethernet Channel Bonding cluster services are active on both the nodes I need to solve the following issue and services are run only active node.
Can some one throw light on this peculiar problem
Regards -S.Balaji