That's the thing Mark, configuring it is where I'm stuck. I'm unsure of what addresses I'm supposed to be using as the prefixes that Hurricane Electric gives me for /64 and /48, are different from the tunnel's endpoint address. At least I think I'm reading it right from the tunnel's information page.
So when I use those to configure dhcpd6.conf and try to run (the second) dhcpd, it tells me it hasn't been configure to use any interface. Even though I'm telling it to on the command line I'm using to test the configuration. Regardless of what interface I tell it to use, it fails.
So I was hoping someone has a working config that works with HE's setup. On Oct 1, 2014 9:24 AM, "Mark Tinberg" mark.tinberg@wisc.edu wrote:
All of my servers and workstations are able to ping6 to outside targets, and anything with a
browser
installed can open ipv6.google.com.
So far I have figured out that you have to run TWO instances of DHCP.
One
instance issues IPv4 and the other issues IPv6. I have not gone so
far as
to actually set up a second instance of DHCP.
As long as you run a router advertisement daemon clients will self-assign routable addresses, you don't really need DHCPv6 if you are also running DHCPv4, you can set DNS (even an IPv6 DNS server) or any other configuration using the DHCPv4 daemon.
— Mark Tinberg mark.tinberg@wisc.edu _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos