Hi,
test following kernelparameters:
pci=nomsi (this works on my Asus Crosshair Formula II with Nvidia 780a SLI Chipset) noapic acpi=off
Am 31.08.2009 09:08, schrieb Nathan Norton:
Hi,
I am having some difficulties installing centos 5.3 on the gigabyte GA-MA790FX-UD5P motherboard.
Has anyone got centos booting on this motherboard?
so far I have tried the following.
disabled the jmicron controller as this caused errors on booting JMB363 bad irq(0): will probe later error (this error caused the installation to stop at this point)
tested all components in another computer, they all work.
remove all unnecessary components from the pci bus.
power supply is not an issue since I have used a 850W PSU
Basically what I am seeing is once the installation process starts and asks do i have another sata disk, and I select no the screen freezes at this point *every* single time, the screen is always blue with a couple of greek looking characters on the screen. No logs are left at this point in the installation, so it is making it difficult to diagnose.
Today I installed the grml distribution and it worked with no issues, it uses a base kernel of 2.6.28. so there is nothing wrong with the hardware but centos still does not want to install on this motherboard.
Anyone have any ideas?
Nathan _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos