Hi, You can not have a gateway that is on another ip subnet than your physical interfaces from that server, so a route should have a gateway that is on the same ip subnet as your interfaces. In your case you should add another subnet on both servers something like: HOST A: 172.29.120.2 HOST B: 172.29.120.3
And then add a route for 20.20.20.0 via 172.29.120.3.
Or you can just add on either of the servers one more ip address from the class of the other server. All this will work if the servers are on the same broadcast domain ( http://en.wikipedia.org/wiki/Broadcast_domain) if they are on distinct ones then you need to configure the router between them to route the 20.20.20.0/24 network to host b.
On Wed, Feb 26, 2014 at 8:28 AM, Jatin Davey jashokda@cisco.com wrote:
Hi All
I have two hosts. Host A and Host B
Host A routing table
[root@localhost ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.29.110.0 172.29.109.1 255.255.255.0 UG 0 0 0 eth0 172.29.109.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 172.29.109.1 0.0.0.0 UG 0 0 0 eth0
HOST A IP address : 172.29.109.254
Host B routing table
[jatin@localhost ~]$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.29.110.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 20.20.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 172.29.110.1 0.0.0.0 UG 0 0 0 eth0
HOST B Ip address : 172.29.110.93
Host B basically houses some simulated devices which are configured in the ip address range of 20.20.20.1 to 20.20.20.254. The netmask being used here is 255.255.255.0
I want to configure a static route on HOST A so that they can reach the simulated devices running on HOST B which are in the ip address range 20.20.20.1-20.20.20.254 , I am trying the following command but it does not configure the static route for me.
[root@localhost ~]# route add -net 20.20.20.0 netmask 255.255.255.0 gw 172.29.110.93 SIOCADDRT: Network is unreachable
Any help is greatly appreciated.
Thanks Jatin _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos