On Tue, Jan 23, 2007 at 07:56:32AM +1100, David Booth enlightened us:
Here is my recipe, tried and true, to compile and load megaraid.ko for HP Netserver LP 1000r using kernel-devel-2.6.9-42.EL and kernel-smp-devel-2.6.9-42.EL which matches my install disk, Centos4.4Final i386 Disk 1 of 4.
If you update the kernel after this you have to do it all again!
Sources: http://www.tuxyturvy.com/blog/index.php?/archives/4-Installing-RHEL4-on-Syst... http://lists.centos.org/pipermail/centos/2005-August/010021.html
# START # Install Centos4.4 on an old system with floppy, net and PCI HD # mkdir /usr/src/software cd /usr/src/software wget http://www.tuxyturvy.com/files/megaraid2.tar.bz2 mkdir /usr/src/megaraid cd /usr/src/megaraid tar jxvfp /usr/src/sofware/megaraid2.tar.bz2 # yum install kernel-devel-2.6.9-42.EL.i686 yum install kernel-smp-devel-2.6.9-42.EL.i686 # cd /usr/src mkdir megaraid cd megaraid tar jxvfp /usr/src/sofware/megaraid2.tar.bz2 make -C /lib/modules/2.6.9-42.EL/build SUBDIRS=/usr/src/megaraid modules cd /usr/src mv megaraid megaraid-686 mkdir megaraid cd megaraid tar jxvfp /usr/src/sofware/megaraid2.tar.bz2 make -C /lib/modules/2.6.9-42.ELsmp/build SUBDIRS=/usr/src/megaraid modules mv megaraid megaraid-smp-686 # # copy megaraid.ko to a floppies and label # insert new disk mformat a: mount /media/floppy cp /usr/src/megaraid-686/megaraid.ko /media/floppy umount /media/floppy # Label it megaraidUP686 # insert new disk mformat a: mount /media/floppy cp /usr/src/megaraid-smp-686/megaraid.ko /media/floppy umount /media/floppy # Label it megaraidSMP686 # # Now have 2 disks with megaraid.ko # # On the SCSI system, start the install with linux # and get to 'no suitable disk' # Alt-F2 rmmod megaraid_mbox rmmod megaraid_mm # insert the labelled megaraidUP686 mkdir /mnt/floppy mount /dev/fd0 /mnt/floppy insmod /mnt/floppy/megaraid.ko # Verify that the module loaded lsmod # see if megaraid is listed # Verify that your RAID array was found Alt-F4 # look for 'megaraid' in the output from the module load # switch back to the normal install screen Alt-F1 # Since you've manually loaded the driver from the command prompt # ignore the instructions to pick a driver. Continue the install. # After all packages are installed and the system prompts you to reboot: ! DON"T DO IT! # Because the megaraid driver was installed manually the installer will # not build a proper initrd. # Fix this before the reboot right now with the following steps: # # switch from the GUI to a bash prompt Alt-F2 # megaraidUP686 floppy is`still in the floppy drive cp /mnt/floppy/megaraid.ko /mnt/sysimage/lib/modules/2.6.9-42.EL/kernel/drivers/scsi umount /mnt/floppy # Insert floppy labelled megaraidSMP686 mount /dev/fd0 /media/floppy # Copy the smp megaraid.ko module cp /media/floppy/megaraid.ko /mnt/sysimage/lib/modules/2.6.9-42.ELsmp/kernel/drivers/scsi # set root to your newly installed system image chroot /mnt/sysimage vi /etc/modprobe.conf # make the line with 'alias scsi_hostadapter' say alias scsi_hostadapter megaraid # Save the file. :wq #Switch to the /boot directory cd /boot #Create new initrd files /sbin/mkinitrd initrd-2.6.9-42.EL.img.megaraid 2.6.9-42.EL /sbin/mkinitrd initrd-2.6.9-42.ELsmp.img.megaraid 2.6.9-42.ELsmp # #Copy the new initrd over old initrd cp initrd-2.6.9-42.EL.img.megaraid initrd-2.6.42-EL.img cp initrd-2.6.9-42.EL.img.megaraid initrd-2.6.42-ELsmp.img # Exit chroot environment exit # Switch back to the GUI installer Alt-F1 reboot # FINISH
Looks great to me. Can you get this on the Wiki?
Matt