I have Windows 7 on /dev/sda and CentOS 6.4 on /dev/sdb. Here are the layouts:
(parted) select /dev/sda Using /dev/sda (parted) print
Model: ATA WDC WD10EZEX-00Z (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos
Number Start End Size Type File system Flags 1 1049kB 374MB 373MB primary ntfs boot 2 374MB 1000GB 1000GB primary ntfs
(parted) select /dev/sdb Using /dev/sdb (parted) print Model: ATA ST500DM002-1BD14 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/4096B Partition Table: gpt
Number Start End Size File system Name Flags 1 1049kB 211MB 210MB fat16 boot 2 211MB 735MB 524MB ext4 3 735MB 500GB 499GB lvm
/boot/efi/EFI/redhat/grub.conf looks like this:
# grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,1) # kernel /vmlinuz-version ro root=/dev/mapper/vg_amrl01-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sdb1 device (hd0) HD(1,800,64000,9b55c4a9-fdbe-4fcd-857b-8e7e129e29f9) default=0 timeout=5 splashimage=(hd0,1)/grub/splash.xpm.gz hiddenmenu title CentOS 6 (2.6.32-358.14.1.el6.x86_64) root (hd0,1) kernel /vmlinuz-2.6.32-358.14.1.el6.x86_64 ro root=/dev/mapper/vg_amrl01-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_amrl01/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_amrl01/lv_root rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-358.14.1.el6.x86_64.img title Windows 7 rootnoverify (hd1,0) chainloader +1
The system boots into CentOS just fine, but selecting the "Windows 7" entry results in
invalid EFI file path Error 1: Filename must be either an absolute pathname or blocklist
Press any key to continue...
By my understanding, since grub is installed on sdb, then sdb becomes hd0 and thus sda would become hd1, and so telling it to boot Windows from hd1,0 makes sense. Also, since anaconda created the Windows entry during the CentOS install, I would have expected this to work. However, as it doesn't work, I'm clearly missing something. Can someome please point me in the right direction as to why this isn't working?
Thanks!
--- Mike VanHorn Senior Computer Systems Administrator College of Engineering and Computer Science Wright State University 265 Russ Engineering Center 937-775-5157 michael.vanhorn@wright.edu http://www.cecs.wright.edu/~mvanhorn/