On Sat, May 12, 2012 at 9:56 AM, Gregory P. Ennis PoMec@pomec.net wrote:
Dear List,
I am still having difficulty installing a second ethernet card in a new CentOS 6.2 install. Tom Bishop was kind enough to give me an excellent link to figure out how to change the device names the way I need to have them. It looks to me that CentOS is recognizing the st1000spex card from StarTech but I am unable to get data to go in or out of it.
The StarTech manual for this card does not include linux as being supported, but several vendors do have their blurbs with linux support caveats. Unfortunately, the StarTech site appears down today, and I have not been able to see if they have documentation as to whether there is a need for special linux drivers.
Do any of you have a StarTech st1000spex, or any suggestions?
Thanks,
Greg Ennis
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Please include the lspci output.
I can access Startech's website and it says it's a Realtek - RTL8111DL based chip, so you'd better start googling about that chipset under CentOS.
-----------------------------------------
Victor,
Thanks for your help.
Looks like StarTech is up for me too now.
I do not have lspci on my system, and could not yum install it, did you mean lsmod? If so here is the output for lsmod :
[root@Mail ~]# lsmod Module Size Used by ipt_REDIRECT 1840 1 iptable_nat 6158 1 nf_nat 22726 2 ipt_REDIRECT,iptable_nat ipt_LOG 5845 5 xt_limit 2182 1 autofs4 26888 3 sunrpc 243918 1 target_core_iblock 8228 0 target_core_file 7746 0 target_core_pscsi 14016 0 target_core_mod 286584 3 target_core_iblock,target_core_file,target_core_pscsi configfs 29821 2 target_core_mod bnx2fc 120622 0 cnic 53443 1 bnx2fc uio 10974 1 cnic fcoe 20748 0 libfcoe 39661 2 bnx2fc,fcoe 8021q 23575 0 libfc 105924 3 bnx2fc,fcoe,libfcoe garp 7344 1 8021q stp 2173 1 garp llc 5642 2 garp,stp scsi_transport_fc 52241 3 bnx2fc,fcoe,libfc scsi_tgt 12173 1 scsi_transport_fc cpufreq_ondemand 10448 4 powernow_k8 18090 0 freq_table 4881 2 cpufreq_ondemand,powernow_k8 mperf 1557 1 powernow_k8 cachefiles 37180 1 fscache 46859 1 cachefiles ipt_REJECT 2383 0 nf_conntrack_ipv4 9506 7 iptable_nat,nf_nat nf_defrag_ipv4 1483 1 nf_conntrack_ipv4 iptable_filter 2793 1 ip_tables 17831 2 iptable_nat,iptable_filter ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 6 nf_conntrack 79453 5 iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322125 92 cnic,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 uinput 8216 0 sg 30124 0 microcode 112594 0 serio_raw 4818 0 i2c_piix4 12608 0 r8169 40000 0 mii 5271 1 r8169 xhci_hcd 126325 0 snd_hda_codec_realtek 309541 0 snd_hda_codec_hdmi 24682 1 snd_hda_intel 25548 2 snd_hda_codec 91845 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 6780 1 snd_hda_codec snd_seq 56591 0 snd_seq_device 6596 1 snd_seq snd_pcm 84702 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_timer 23057 2 snd_seq,snd_pcm snd 70023 13 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer soundcore 8086 1 snd snd_page_alloc 8662 2 snd_hda_intel,snd_pcm ext4 364410 6 mbcache 8144 1 ext4 jbd2 88834 1 ext4 sr_mod 16228 0 cdrom 39803 1 sr_mod sd_mod 39520 3 crc_t10dif 1541 1 sd_mod usb_storage 49452 0 wmi 6287 0 ahci 40455 2 radeon 1023391 0 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230707 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81692 20 dm_mirror,dm_log
It is interesting in that the nic interface on the mother board is listed as : Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit
The nic interface on the mother board works fine. Based on this I would have expected the st1000spex to work perfectly. The mmi entry is listed as R8169 for lsmod output, I am not really sure what this means.
Greg ---------------------------------------------------------------------
OK, I do have lspci on this system; I am going to it down and put the st1000spex back in the slot, and will send the lspci out put after I reboot.
Greg