op 19-12-13 12:38, Johan Vermeulen schreef:
op 19-12-13 12:23, wwp schreef:
Hello Johan,
On Thu, 19 Dec 2013 12:08:17 +0100 Johan Vermeulen jvermeulen@cawdekempen.be wrote:
Dear All,
I'm having trouble on 2 laptops Lenovo B580 since upgrading to Centos6.5. ( Because it's a Lenovo I cannot switch the network card for a better supported network card. )
There on the latest kernel :
root@jac network-scripts]# uname -a Linux jac.cawdekempen 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 13:06:13 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
With the help of the Elrepo Broadcom page I got the driver and that part works fine. The network card works :
# vi /etc/udev/rules.d/70-persistent-net.rules # PCI device 0x14e4:0x4727 (wl) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c0:14:3d:c1:f6:ef", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# uname -a eth1 Link encap:Ethernet HWaddr C0:14:3D:C1:F6:EF inet6 addr: fe80::c214:3dff:fec1:f6ef/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:651 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:17
But I cannot connect to any wireless network with neither of the machines.
I click on the gnome-nm-applet and type in the password.
[root@jac network-scripts]# tail -f /var/log/messages Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added 'scan_ssid' value '1' Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added 'psk' value '<omitted>' Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added 'group' value 'TKIP CCMP' Dec 19 11:10:17 jac NetworkManager[2148]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: set interface ap_scan to 1 Dec 19 11:10:17 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: inactive -> scanning Dec 19 11:10:18 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: scanning -> associating Dec 19 11:10:28 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: associating -> disconnected Dec 19 11:10:28 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: disconnected -> scanning Dec 19 11:10:29 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: scanning -> associating Dec 19 11:10:39 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: associating -> disconnected Dec 19 11:10:39 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: disconnected -> scanning Dec 19 11:10:40 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: scanning -> associating Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Activation (eth1/wireless): association took too long. Dec 19 11:10:42 jac NetworkManager[2148]: <info> (eth1): device state change: 5 -> 6 (reason 0) Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Activation (eth1/wireless): asking for new secrets Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Couldn't disconnect supplicant interface: Method "Disconnect" with signature "" on interface "fi.epitest.hostap.WPASupplicant.Interface" doesn't exist#012. Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Couldn't disconnect supplicant interface: Method "Disconnect" with signature "" on interface "fi.epitest.hostap.WPASupplicant.Interface" doesn't exist#012. Dec 19 11:10:42 jac NetworkManager[2148]: <info> (eth1): supplicant connection state: associating -> disconnected Dec 19 11:10:43 jac NetworkManager[2148]: <info> (eth1): device state change: 6 -> 9 (reason 7) Dec 19 11:10:43 jac NetworkManager[2148]: <warn> Activation (eth1) failed for access point (Clive) Dec 19 11:10:43 jac NetworkManager[2148]: <info> Marking connection 'Auto Clive' invalid. Dec 19 11:10:43 jac NetworkManager[2148]: <warn> Activation (eth1) failed. Dec 19 11:10:43 jac NetworkManager[2148]: <info> (eth1): device state change: 9 -> 3 (reason 0) Dec 19 11:10:43 jac NetworkManager[2148]: <info> (eth1): deactivating device (reason: 0).
googling for "centos6 WPASupplicant.Interface" doesn't exist#012" I found this bug:
http://bugs.centos.org/view.php?id=5834
could this be the same issue?
Got the exact same problem after upgrading to CentOS 6.5, and I was not the only one. The archives of this ML would bring you help, check the thread I started: Date: Tue, 10 Dec 2013 10:26:19 +0100 From: wwp subscript@free.fr To: centos@centos.org Subject: [CentOS] Upgrade to CentOS 6.5 -> issue with Broadcom Wifi
As suggested by contributors here, and as written at http://elrepo.org/tiki/wl-kmod, I ended up installing the latest available driver by building the RPM from the archive of the sources. The procedure is described at the link above.
Regards,
Hello,
thanks for the reply.
I did build the driver, using wl-kmod-6_30_223_141-2.el6.elrepo.nosrc.rpm http://elrepo.org/linux/elrepo/el6/SRPMS/wl-kmod-6_30_223_141-2.el6.elrepo.nosrc.rpm and hybrid-v35_64-nodebug-pcoem-6_30_223_141.tar.gz This resulted in kmod-wl-6_30_223_141-2.el6.local.x86_64.rpm which I hope is the latest.
This results in a working network card, so that part went fine.
I guess the wpa_supplicant is maybe a different issue.
Greetings, J. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Dear All,
looks to me I was having trouble with this cards because I still had the Elrepo - compiled drivers installed. Seems like Broadcom BCM4313 now works out of the box.
Greetings, J.