My solution, please tell me if I'm right:
-remove the entire sdb disk from raid -remove sda2 from raid -resize sda1 (the rest of disk) -copy partition table from sda to sdb -make raid between sda1/sdb1 and sda3 and sdb3
Is this possible?
On Sun, 05 Oct 2008 15:15:40 -0700, John R Pierce pierce@hogranch.com wrote:
Iulian Badea wrote:
Hello all,
I have 2 x 250GB sata disks (sda and sdb).
# fdisk -l /dev/sda
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 14939 119997486 fd Linux raid autodetect /dev/sda2 14940 29878 119997517+ fd Linux raid autodetect /dev/sda3 29879 30400 4192965 fd Linux raid autodetect
# fdisk -l /dev/sdb
Disk /dev/sdb: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdb1 * 1 522 4192933+ fd Linux raid autodetect
# cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb1[1] sda3[0] 4192832 blocks [2/2] [UU]
md1 : active raid1 sda2[1] sda1[0] 119997376 blocks [2/2] [UU]
What I want to do:
- have on each disk 2 partitions (4gb for swap and the 200gb+ the rest
for
/)
- raid 1 between them
This is what I wanted in the beginning, but...I didn't paid attention...
What can I do to rebuild it to my needs (without loosing data or reformatting)?
ouch.
I'd boot a rescue CD, drop the mirrors, repartition and mkfs on sdb1, dump both file systems to it, drop both metadisks, repartition sda1 as 2 x raid1 w/o any active mirrors, mkfs on them, restore the dumps to these new md0, md1, then repartition sdb again as the two mirrors and join them to md0, md1
but thats just me. others might do it differently. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos