Not too familiar with booting iscsi drives. Is there a script run, or a syntax for /etc/fstab?
# yum -y install iscsi-initiator-utilsthen, edit /etc/iscsi.conf and define username and password and the iscsi server like...
....
Checking iscsi config: [ OK ]
Loading iscsi driver: [ OK ]
Dec 1 21:24:39 svfis-blade04 iscsi: iscsi config check succeeded
Dec 1 21:24:40 svfis-blade04 kernel: iscsi-sfnet: Loading iscsi_sfnet version 4:0.1.11-3
Dec 1 21:24:40 svfis-blade04 kernel: iscsi-sfnet: Control device major number 254
Dec 1 21:24:40 svfis-blade04 iscsi: Loading iscsi driver: succeeded
Starting iscsid: [ OK ]
Dec 1 21:24:45 svfis-blade04 iscsid[13131]: version 4:0.1.11-3 variant (02-May-2006)
Dec 1 21:24:45 svfis-blade04 iscsi: iscsid startup succeeded
Dec 1 21:24:45 svfis-blade04 iscsid[13135]: Connected to Discovery Address 10.5.160.91
Dec 1 21:24:45 svfis-blade04 kernel: iscsi-sfnet:host8: Session established
Dec 1 21:24:45 svfis-blade04 kernel: scsi8 : SFNet iSCSI driver
Dec 1 21:24:45 svfis-blade04 kernel: Vendor: Openfile Model: Virtual disk Rev: 0
Dec 1 21:24:45 svfis-blade04 kernel: Type: Direct-Access ANSI SCSI revision: 04
Dec 1 21:24:45 svfis-blade04 kernel: SCSI device sdc: 42205184 512-byte hdwr sectors (21609 MB)
Dec 1 21:24:45 svfis-blade04 kernel: SCSI device sdc: drive cache: write through
Dec 1 21:24:45 svfis-blade04 kernel: SCSI device sdc: 42205184 512-byte hdwr sectors (21609 MB)
Dec 1 21:24:45 svfis-blade04 kernel: SCSI device sdc: drive cache: write through
Dec 1 21:24:45 svfis-blade04 kernel: sdc: sdc1
Dec 1 21:24:45 svfis-blade04 kernel: Attached scsi disk sdc at scsi8, channel 0, id 0, lun 0
Dec 1 21:24:45 svfis-blade04 scsi.agent[13195]: disk at /devices/platform/host8/target8:0:0/8:0:0:0
# fdisk -l /dev/sdc
Disk /dev/sdc: 21.6 GB, 21609054208 bytes
64 heads, 32 sectors/track, 20608 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 20608 21102576 83 Linux