Bryan, here's the page on the Antec TruePower 2.0 PSU:
http://www.antec.com/us/productDetails.php?ProdID=20551
Bryan J. Smith wrote:
On Thu, 2005-07-28 at 16:08 -0700, Kirk Bocek wrote:
This PSU does have a flexible setup. The "24" pin connector actually separates into 20-pin and 4-pin connectors. I believe that's what you'd use on a regular ATX board.
Not exactly. While 20-pin ATX[1.0] and ATX12V (aka P4) as well as 24- pin ATX2.0 all share the same, base 20-pin, I'm not entirely sure EPS12V is the same as ATX2.0.
I believe there is a converter or partial cable used for EPS12V to ATX [1.0|12V|2.0]. I could be wrong though. Never tried it.
This is in addition to the EPS 8-pin connector.
Yep, the 2x4 SSI Server pin-out.
At this point we're doing tower cases (and UPS's) sitting on shelves. I'd love to have a pretty rack, but I wanted the dual-Opteron rig more. :)
I still deliver rackmounts even when I don't mount them in a rack so the option is always there for the client. I won't worry about mounting or rails, but at least it's already in a rack.
Looks like the 2.6.12.3 kernel has the latest driver. And if I read 3Ware's site correctly, the 2.26 driver includes the firmware.
That depends. One way you can check and compare is to compare your POST string to the versions listed in the README of release 9.2.0: http://www.3ware.com/download/Escalade9000Series/9.2/9.2_Release_Notes_Web.p...
I see the "3w-9xxx_fw.h" included in the EL kernels, but that doesn't mean it's getting built with it. I'll have to check the config defaults. I always just upgrade my manually so there's no issue. If your POST looks good, then that's all you need.
I'm not using the GUI tool at all. Come on! I'm a *real* man! :)
The 3DM2 is a nice monitoring tool. I can be setup to page you via e- mail, send out alerts, etc... when you have a failure.