I have the latest bios installed - DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7596/785GM-E51 (MS-7596), BIOS V2.12 02/18/2011
However, I just used the ELRepo to install kernel-ml (Linux version 3.11.4-1.el6.elrepo.x86_64) and it shuts down fine,.. Of course, it has other errors - lol
So I'm leaning toward it’s a kernel bug with these kernel-2.6.32-358.18.1.el6.x86_64 and kernel-2.6.32-358.el6.x86_64 (the two installed by default)
Now I'm going to try to locate the kernel version list so I can see if I can get a smaller jump in version up to test with.
kernel-ml-3.11.4-1.el6.elrepo.x86_64 worked as expected on the shutdown, but has some other issues.
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of James A. Peltier Sent: Friday, October 11, 2013 6:58 PM To: CentOS mailing list Subject: Re: [CentOS] Centos 6.4 - doesnt power off with shutdown/poweroff cmd
Update your BIOS if there is one. I've found that to often be the cause.
----- Original Message ----- | Same result, doesn't turn off. | | Any other ideas? | | -----Original Message----- | From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On | Behalf Of Andrew Wyatt | Sent: Friday, October 11, 2013 4:41 PM | To: CentOS mailing list | Subject: Re: [CentOS] Centos 6.4 - doesnt power off with | shutdown/poweroff cmd | | Try using the reboot=pci grub parameter. | | | On Fri, Oct 11, 2013 at 11:40 AM, Terre Porter | <tporter@webpage-builders.com | > wrote: | | > Hello, | > | > | > | > I'm looking for help figuring out why I am having problems with | > shutting down a machine. | > | > | > | > I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's | > and both power down without issues. | > | > | > | > I added acpi.debug_level=1 to the grub boot as it was suggested to | > see more info about ACPI in the logs | > | > | > | > I found the following ACPI Errors in the /var/log/messages | > | > | > | > Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN] | > Namespace lookup failure, AE_NOT_FOUND | > | > Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method | > parse/execution failed [] (Node ffffffff81fdbeb0), AE_NOT_FOUND | > | > | > | > Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io | > 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] | > | > Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available | > for this device, you should use it instead of the native driver | > | > | > | > I used the Centos 6.4 Live CD last night with no hard drive in the | > system. | > | > | > | > I photo'd the shutdown, here is the type up: | > | > | > | > Sending all processes the TERM signal... | > | > Sendng all processes the KILL signal... | > | > Saving random seed: | > | > Syncing hardware clock to system time | > | > Turning off quotas: | > | > umount2: Device or resource busy | > | > umount: /dev/.initramfs/live: device is busy. | > | > (In some cases useful info about processes that use | > | > the device is found by lsof(8) or fuser(11)) | > | > init: Re-executing /sbin/init | > | > Halting System... | > | > r8169 0000:02:00.0: PME# enabled | > | > ACPI: Preparing to enter system sleep state S5 | > | > ACPI Error (psargs-0359): [PPTS] Namespace lookup failure, | > AE_NOT_FOUND | > | > ACPI Error (psparse-0537): Method parse/execution failed | > [_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND | > | > ACPI Error (psparse-0537): Method parse/execution failed [\PTS_] | > (Node ffff88019d043560), AE_NOT_FOUND | > | > ACPI Error (psparse-0537): Method parse/execution failed [_PTS] | > (Node ffff88019dbcf9e8), AE_NOT_FOUND | > | > Disabling non-boot CPUS... | > | > SMP alternatives: switching to UP code | > | > Power Down. | > | > acpi_power_off called | > | > | > | > The system doesn't power off, it just sits there. I have to hold the | > power button in for it to shut down. | > | > | > | > The same still occurs with a completed a fresh minimum install of | > Centos 6.4, installed the EPEL repo and did yum update. | > | > | > | > I'm running the latest bios for the motherboard, and even tried | > going back one version. | > | > | > | > MB: 785GM-E51 (MS-7596 1.2) | > | > CPU: AMD Phenom II x4 945 3ghz | > | > 1TB HD, 6 Gig Mem | > | > | > | > Any ideas? | > | > | > | > (Besides using a baseball bat - I am considering it) | > | > | > | > Here is some hardware info from the getinfo.sh script listed the | > forums. | > | > | > | > == BEGIN uname -rmi == | > | > 2.6.32-358.18.1.el6.x86_64 x86_64 x86_64 | > | > == END uname -rmi == | > | > | > | > == BEGIN rpm -qa *-release* == | > | > centos-release-6-4.el6.centos.10.x86_64 | > | > epel-release-6-8.noarch | > | > == END rpm -qa *-release* == | > | > | > | > == BEGIN cat /etc/redhat-release == | > | > CentOS release 6.4 (Final) | > | > == END cat /etc/redhat-release == | > | > | > | > == BEGIN getenforce == | > | > Enforcing | > | > == END getenforce == | > | > | > | > == BEGIN rpm -qa kernel* | sort == | > | > kernel-2.6.32-358.18.1.el6.x86_64 | > | > kernel-2.6.32-358.el6.x86_64 | > | > kernel-firmware-2.6.32-358.18.1.el6.noarch | > | > == END rpm -qa kernel* | sort == | > | > | > | > == BEGIN lspci -nn == | > | > 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host | > Bridge [1022:9601] | > | > 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 | > PCI to PCI bridge (int gfx) [1022:9602] | > | > 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 | > PCI to PCI bridge (PCIE port 1) [1022:9605] | > | > 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] | > | > 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] | > | > 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0 USB OHCI1 Controller [1002:4398] | > | > 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] | > | > 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] | > | > 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0 USB OHCI1 Controller [1002:4398] | > | > 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] | > | > 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 | > SMBus Controller [1002:4385] (rev 3c) | > | > 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] | > | > 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI | > SBx00 Azalia (Intel HDA) [1002:4383] | > | > 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] | > | > 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI | > SBx00 | > PCI to PCI Bridge [1002:4384] | > | > 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI | > SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] | > | > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h | > Processor HyperTransport Configuration [1022:1200] | > | > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h | > Processor Address Map [1022:1201] | > | > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h | > Processor DRAM Controller [1022:1202] | > | > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h | > Processor Miscellaneous Control [1022:1203] | > | > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h | > Processor Link Control [1022:1204] | > | > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices | > [AMD] nee ATI RS880 [Radeon HD 4200] [1002:9710] | > | > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. | > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] | > (rev | > 03) | > | > == END lspci -nn == | > | > | > | > | > | > | > | > _______________________________________________ | > CentOS mailing list | > CentOS@centos.org | > http://lists.centos.org/mailman/listinfo/centos | > | _______________________________________________ | CentOS mailing list | CentOS@centos.org | http://lists.centos.org/mailman/listinfo/centos | | _______________________________________________ | CentOS mailing list | CentOS@centos.org | http://lists.centos.org/mailman/listinfo/centos |
-- James A. Peltier Manager, IT Services - Research Computing Group Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpeltier@sfu.ca Website : http://www.sfu.ca/itservices
“A successful person is one who can lay a solid foundation from the bricks others have thrown at them.” -David Brinkley via Luke Shaw _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos