On Fri, 28 Mar 2008 at 4:23pm, Jerry Geis wrote
clearpart --all --initlabel part --ondisk=sda raid.01 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sda1 --size=20000 part --ondisk=sda swap --asprimary --bytes-per-inode=4096 --fstype="swap" --onpart=sda2 --size=4000 part --ondisk=sda raid.02 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sda3 --size=1 --grow part --ondisk=sdb raid.03 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sdb1 --size=20000 part --ondisk=sdb swap --asprimary --bytes-per-inode=4096 --fstype="swap" --onpart=sdb2 --size=4000 part --ondisk=sdb raid.04 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sdb3 --size=1 --grow raid / --bytes-per-inode=4096 --device=md0 --fstype="ext3" --level=1 raid.01 raid.03 raid /home --bytes-per-inode=4096 --device=md1 --fstype="ext3" --level=1 raid.02 raid.04
I changed the config to use --ondisk above and at install I get a message saying:
"Unable to locate partition sda1 to use for ." Press OK to reboot your system.
Remove the 'onpart's. You can't use 'clearpart' and 'onpart' together. The manual says onpart tells anaconda to "Put the partition on the *already existing* device", but clearpart *removes* any already extant devices.