On Wed, Apr 13, 2011 at 11:19 AM, Emmanuel Noobadmin centos.admin@gmail.com wrote:
On 4/13/11, Rudi Ahlers Rudi@softdux.com wrote:
to expand the array :)
I haven't had problems doing it this way yet.
I finally figured out my mistake creating the raid devices and got a working RAID 0 on two RAID 1 arrays. But I wasn't able to add another RAID 1 component to the array with the error
mdadm: add new device failed for /dev/md/mdr1_3 as 2: Invalid argument
Googling up this indicates that it's the expected result trying to add a new device to a RAID 0 array. Could you or anybody else please share what's the trick to achieving this?
You can't expand a mdraid raid0.
I believe you can expand a mdraid raid10,5,6, but not raid0.
If you want to use separate raid1 devices instead of mdraid's raid10 implementation then use LVM, add them to a VG then stripe the LVs across the different PVs.
The only problem with that is restriping existing LVs across new PVs is difficult to the point that it is often better to create new LVs with the proper striping. You can do it though using 'lvresize' to change the stripe width, but it won't give a linear striping for existing data and the LV will eventually fill the first PVs causing all data to only be written to the last PV.
I often find it handy to have a "backup" raid1 disk on the system that's big enough to hold the contents of the largest LV, then dump the production LV to the backup, blow away the production, recreate with the new stripe size, then restore the data back. This backup volume could be an iSCSI volume exported from another server that does have the capacity if there isn't any in the host.
-Ross