Hi,
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Robert Heller Sent: Friday, August 28, 2009 12:23 AM To: CentOS mailing list Cc: CentOS mailing list Subject: Re: [CentOS] using Linux as a NAS / SAN device
At Fri, 28 Aug 2009 00:12:27 +0200 CentOS mailing list centos@centos.org wrote:
Hi,
I'm looking at using Linux as a NAS / SAN device, and would like some input from other's who have done this before?
How would it compare to commercial SAN devices, Thecus N8800SAS (http://www.thecus.com/products_over.php?cid=11&pid=177&set_language=... nglish) or something similar to these?
I would probably use hardware RAID 10, and could go with either SAS / SATA, and then probably offer iSCSI, Samba. NFS & rsync. In terms of servers hardware, well either Tyan / SuperMicro / Intel / Dell would be fine as well. But, my question is rather from a linux point of view, how would Linux compare to dedicated NAS devices, in terms of the OS managing the device?
I think many dedicated NAS devices, are in fact Linux machines, using an embedded Linux system.
-- Just a word of caution. I had a simarly question: building one self, or buyding dedicated hw. Looked through several specs of different boxes, and decided for an ICY-box, that can hold two sata-disks, raid0/raid1/jbod, has an GB-ethernet interface and capable of doing NFS. (which is actually an Linux-box)
However, the box is as slow as a proverbial civil-servant, although the link is realy set to GB, it just might as well have been 100MB. And even that its not capable of filling to the max. (60Mb) Found out (afterwards ;-) on the relevant product mailing lists that it's the max the box can do.
hans
______________________________________________________________________ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.
This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.