On 04/08/13 12:55, Louis Lagendijk wrote:
On Mon, 2013-04-08 at 12:21 -0400, m.roth@5-cent.us wrote:
That I don't know, and was trying to think of a way to test it. As I noted in another post, the 5.25" light seems to stay on, and I *think* that was the one I had disconnected before. I also think I mentioned that after bringing it down, connecting, and rebooting, I looked at the BIOS, and it told me it *only* saw the 3.5" drive.
<snip>
That is why I thought of the cable/drive issue. Please keep in mind that the bios versions I recall did not detect a drive unless it was told that there was one (you had to even specify the type/ format of the drive)
Any chance that
<snip>
You gents nailed it. I brought my machine down again, and set the BIOS to see the 1.2M as a, and the 1.44 as b: while it was down, before I did that, I looked... I'm sure the cable was on, but it's really hard to see the open side of the case still covers about a third of the board, and with all the cables.... Pulling out my trusty minimag, and moving cables... and it was upside down. I don't know how it got on that way, certainly I wouldn't have forced it, but flipped it over, and played with the BIOS... the 3.5" drive still doesn't work... but the 1.2M floppy, as b: *does* work - light goes on only when I try to read it, and not otherwise.
Now I don't know if I have a drive cleaner, since I can't believe none of the first 10 or so disks I tried to look at was readable.
But I'm over the first hump. Now I'm playing with /dev/fd1 and /dev/floppy-fd1 (and why is it trying to read a superblock when I try to mount it, when I've said -t msdos? Oh, well, onward in the fight.)
mark