On Tue, 2012-05-01 at 02:08 -0500, Cbulist wrote:
On 05/01/2012 02:03 AM, Barry Brimer wrote:
Yes, I thought the same but my confusion is that I don't see any rules of PREROUTING and POSTROUTING in the /etc/sysconfig/iptables file.
[root@VS01]# cat /etc/sysconfig/iptables # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 631 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 631 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 631 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT
But when I check the command iptables -L -t nat I can see the NAT rules
[root@VS01]# iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination
Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE tcp -- 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535 MASQUERADE udp -- 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535 MASQUERADE all -- 192.168.122.0/24 !192.168.122.0/24 MASQUERADE tcp -- 192.168.100.0/24 !192.168.100.0/24 masq ports: 1024-65535 MASQUERADE udp -- 192.168.100.0/24 !192.168.100.0/24 masq ports: 1024-65535 MASQUERADE all -- 192.168.100.0/24 !192.168.100.0/24
Chain OUTPUT (policy ACCEPT) target prot opt source destination
am I missing something?
Maybe .. do you have IPv4 forwarding enabled? What is the output of "cat /proc/sys/net/ipv4/ip_forward" ?? If it is 0, then edit /etc/sysctl.conf .. find net.ipv4.ip_forward .. set it to 1 and then run (as root) sysctl -p
In the Host machine the ip_forward is 1
If you restart libvirtd it should add in the IPTABLES rules you are missing.