Hello
I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable.
HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about tape drive, e.g. SCSI ID. However none of them happened in my case! (document: "UP LTO Ultrium 2-3 - Unix Config Guide")
The SCSI adapter is an LSI53C1030. The system has another the same adapter which is used for hard disk drives.
The interesting part is, the hard disk are detected and even OS boots from them, but I can't make the tape drive work. Moreover, in system boot up, LSI SCSI BIOS displays informations saying there is a tape drive connected!
Any one has same experience, suggestion, comments or clues?
I've place a zip file here: http://msarmadi.googlepages.com/report_files.zip which contains:
- dmesg - lshal - lsmod - lspci -vv - cat /proc/scsi/scsi > proc.scsi.scsi - cat /proc/modules > proc.modules - uname -a > uname
Also, below there are detailed information about devices and OS config/log files.
===== System info: Operating System: Redhat Enterprise Linux AS 5(the same thing happened using CentOS 5.2) Sever System: HP ML530 G4 SCSI Adapter: LSI 1030 Tape Drive: HP Storage Works Ultrium 448 - 1U Rack-mountable SCSI Cable: P/N 313375002 Rev R (coming with tape drive)
*Note that, no other SCSI devices are connected to the cable.
===== Here is some parts of boot up messages on the screen of HP ML350 G4 ==== System BIOS D17 (14/04/2005)
...
MPTBIOS-5.05.18
...
Slot 3 HP Smart Array 6400 Controller (192MB, v.2.26) 1 Logic Drive Detected 1794-Slot 3 Drive Arraye - Array Accelerator Battery Charge low Array Accelerator Posted-Write Cache is temporarilty Disabled Array Accelerator batteries hace failed to charge and should be replaced
Slot 3 HP Smart Array 6400 EM Controller (192MB, v.2.26) 1 Logic Drive Detected Tape or CD-ROM Drive(s) Detected: SCSI Port 2: SCSI ID 1 1785-Slot 3 Drive Arraye Not Configured No Drives Detected ...
[Followed by GRUB and Linux boot up] =========================
-- Mehdi Sarmadi