Dear CentOS users,
I installed CentOS 6.2 x64 in a Sun Fire X4450 machine, it has 4 disks and I configured them to be a single volume (no RAID). The installer sees the volume perfectly, its 570Gb. I created two ext3 partitions, /dev/sda1 and /dev/sda2. In the logs I see they are formated correctly. All the files are installed.
Then when I reboot, I get to the GRUB menu. Choose the first and only option, and immediately after that I only see a black screen with blinking cursor on top left.
I've tried recreating the grub manually with : find /boot/grub/stage1 (reported it on hd0,0) root (hd0,0) setup (hd0) quit
Then I try to boot and I get the same blinking cursor.
I tried another approach with no luck either : replacing root=LABEL=UUID for root=/dev/sda1 just to see if this could help ... but I have the same problem.
I don't really now what's going on. Is there anyway to put grub into verbose mode so I can see what exactly it is doing or looking for ?
Thanks in advance.
Regards.