On Mon, 2007-08-27 at 15:05 +0800, Matt Arnilo S. Baluyos (Mailing Lists) wrote:
Hello everyone,
I'm doing an audit of all our servers here (there aren't that many maybe around 5-10) and one of the things I'm doing is taking note of each server's hardware specs (processor, memory, etc).
I can't seem to figure out how to get the information for the hard drives. The drives are in a hardware RAID5 array and are all SCSI types. I would like to get each physical SCSI drive's specifications (like, disk capacity).
Also, we have another server that also uses Hardware RAID and there's a RAID5 and a RAID1 array in there and I would also like to get as much information as I have on them.
How do I get this information from the console? Is this possible? I don't have physical access to the servers and can only log in remotely.
Thanks, Matt
---- try this (as root naturally) wget -q -O - http://linux.dell.com/repo/software/bootstrap.cgi | bash yum install srvadmin-all modprobe ipmi_si modprobe ipmi_devintf srvadmin-services.sh start
then open a web browser and point it to the system in question...
https://ip_address_or_fqdn:1311
log in as root
otherwise, you can use 'omreport' commands also installed by above
Craig