On Mon, 2006-05-01 at 23:18, Mace Eliason wrote:
Personalities : [raid1] md1 : active raid1 sdb2[0] 2048192 blocks [2/1] [U_] md2: active raid1 sdb3[0] 15623104 blocks [2/1] [U_] md0: active raid1 sda1[1] 104320 blocks [2/1] [_U]
That tells you that your raid devices were built with 2 partitions and now only have one active. It shows which member is active - note that they aren't all on the same drive. Assuming you have matching partitions on the other drive (do an 'fdisk -l' to make sure) and are sure the correct version is running now:
mdadm --add /dev/md0 /dev/sdb1 mdadm --add /dev/md1 /dev/sda2 mdadm --add /dev/md2 /dev/sda3
'cat /proc/mdstat' will show the re-sync progress. Don't reboot until the resync is complete and you see [UU] on all devices. When they have all completed, if you reboot cleanly the md devices will come up with both partitions active (but you don't have to reboot unless you want to test it).