On 4/18/07, Mark Hull-Richter mhullrich@gmail.com wrote:
Here's mine:
# Do not remove the following line, or various programs # that require network functionality will fail. 69.234.27.32 mhrichter 127.0.0.1 mhrichter localhost.localdomain localhost 192.168.108.128 mhr-wm-win
It would really best to supply the whole host.domain in the file for the entry. Since you also have 2 different networks, sendmail may be having trouble figuring out what the server really is. The 192.168 address resolves differently than the 69.234 address. And the 69.234 address doesn't reverse to the same name set in /etc/hosts. This confusion can very much cause sendmail to get all turned around and stall. You might want to consider looking at your logs to see if you have errors reflecting this.
Do you have an sata controller that isn't supported with smartd?
I don't think so - it's the on-board controller in the mobo (nVidia chipset), and this only started when I started having problems with the SG 400GB drive (that is now gone), or at least that was when I began to notice it. My lsmod shows sata_nv, which would be the right one.
Are you using the stock drivers or the proprietary nForce chipset drivers?