On Mon, Jul 18, 2011 at 11:06 PM, Cody Jackson supertanker13@gmail.com wrote:
Hi Manish;
I've never tried NM during boot. (Personally, I dislike NM at all.) You might find a system similar to this to be more of your liking:
http://wiki.centos.org/HowTos/Laptops/WpaSupplicant
I use this in place of my CentOS 6 backup server, which has an rt2500pci card in it--which, by the way, is a horrible shoddy card that I do not recommend. It doesn't play nice with Netgear APs. But I digress.
CentOS 6 appears to have made some changes to the above document. What I've discovered is:
- You don't need to edit ifup-wireless.
- You don't need to edit ifconfig-* (although one should be
created--I can post mine if it'll help you.) 3. All you need in /etc/rc.local is an 'ifup wlan0' line. 4. You DO need to edit /etc/sysconfig/wpa_supplicant and add the interface of your wireless card to the options there (example: -iwlan0). 5. wpa_supplicant should be ENABLED on boot.
Cheers, Cody Jackson
On 7/18/11, Manish Kathuria mkathuria@tuxtechnologies.co.in wrote:
I have recently installed CentOS 6 on a system with a Realtek 8180L wireless card. The wireless card is detected properly and uses the rtl8180 driver. But it connects to our wireless network only after logging to the Desktop Environment (GNOME) and using the Network Manager Applet. In order to make the wireless card connect to the network automatically at system start up, I edited the Connection using the Network Manager Applet and checked "Connect Automatically" and "Available to all users" options. However, while booting the system, the following error message is displayed when the wireless network interface is brought up.
Device does not seem to be present, delaying initialization
But as soon as a user logs on to the Desktop, he can connect to the network using the NM Applet.
I have also toggled between using DHCP and Static IP Address for the the wireless card but it makes no difference. The SSID is not being broadcast and the Wireless Access Point / Router uses WPA-PSK. -- Manish Kathuria
Thanks for the tip. While searching for a solution, I also read about wicd (http://wicd.sourceforge.net/) which can help, but will try wpa_supplicant first since its a part of the distro.