On Fri, May 14, 2010 at 03:02:04PM -0400, Jerry Geis wrote:
GATEWAY=74.223.8.177 on /etc/sysconfig/network file ?
Actually I have that in the ifcfg-eth1 and ifcfg-eth2. And this is hte route I get.
DEVICE=eth1 ONBOOT=YES BOOTPROTO=static IPADDR=74.223.8.179 NETMASK=255.255.255.240 GATEWAY=74.223.8.177
DEVICE=eth2 ONBOOT=Yes BOOTPROTO=static IPADDR=24.123.23.170 NETMASK=255.255.255.248 GATEWAY=24.123.23.169
route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 24.123.23.168 0.0.0.0 255.255.255.248 U 0 0 0 eth2 74.223.8.176 0.0.0.0 255.255.255.240 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 0.0.0.0 24.123.23.169 0.0.0.0 UG 0 0 0 eth2
I dont want 74.X traffic going out 24.X network. I want it going back out the 74.X network. How do I setup the ifcfg-eth files so the GW above will route back out the correct gw?
It won't work. You can't have two default gateways. Init scripts first set your gateway via eth1, then parse ifcfg-eth2 (alphabetical) and overwrites previous settings.