On Oct 24, 2013, at 3:55 PM, Akemi Yagi wrote:
On Thu, Oct 24, 2013 at 12:47 PM, Tony Schreiner <anthony.schreiner@bc.edumailto:anthony.schreiner@bc.edu> wrote:
I had used the the 6.3 net installer disk (and the 6.4 repo) which I noticed had kernel 2.6.32-279, so I retrieved that kernel from the vault and it works.
The 279 and earlier kernels don't display any ipmi messages during boot (in dmesg) The system is not ipmi capable I don't believe, should I be looking there?
Try adding the following kernel parameters and see if the 6.4 kernel boots:
ipmi_si.tryacpi=0 ipmi_si.trydmi=0 ipmi_si.trydefaults=0
Akemi ______________________________________________
Akemi
Awesome, that did the trick. I do not see those parameters in https://www.kernel.org/doc/Documentation/kernel-parameters.txt
There is an error in the boot to 2.6.32.-358.23.2
irq 19: nobody cared (try booting with the "irqpoll" option)
I've added the irqpoll parameter and the message goes away.Is there any downside to using it?
Tony