On 11/11/13, Arun Khan knura9@gmail.com wrote:
On Mon, Nov 11, 2013 at 3:14 PM, hadi motamedi motamedi24@gmail.com wrote:
Dear All I needed to clone my disk to another hard drive . I did it as the following : #dd if=/dev/sdb of=/dev/sdc But after a while, the procedure ended with the "writing to /dev/sdc input/output error" message.
Is /dev/sdc >= /dev/sdb?
Also, input/output error is an indication of a hardware problem (disk controller on the board, cable, or the disk).
Can you please let me know how can I overcome this as the fdisk now returns as " #fdisk /dev/sdc "I do not know how to handle files with mode 81a4 must set cylinders"
What does 'parted --list' display?
What can I do at know ?
Post the answers for above.
-- Arun Khan _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Please find below : #parted -list disk /dev/hda 21.5GB sector : 512B/512B partition : msdos disk : /dev/sdb 40GB sector : 512B/512B partition : msdos error: unable to open /dev/md0 unrecognized disk label.