IF you are not stuck to IPSec, you might want to take a look at OpenVPN (www.openvpn.org). I found OpenVPN easier to install than FreeSWAN (an IPSEC VPN) and have setup an OpenVPN solution between my German office and our mainoffice in a matter of hours.
Thom van der Boon E-Mail: Thom.van.der.Boon@vdb.nl
=====
Thom.H. van der Boon b.v. Havens 563 Jan Evertsenweg 2-4 NL-3115 JA Schiedam Tel.: +31 (0)10 4272727 Fax: +31 (0)10 4736620 E-Mail: info@vdb.nl Home Page: http://www.vdb.nl/
simone72@email.it 23.05.2005 18:18:56 >>>
Hi list, I am trying to create a VPN between two different locations. On the first location we have a cisco pix 525 Natting the internal 192.168.100.x network, while on the second location we have a Centos3 box Natting via iptables the internal 192.168.10.x netowrk. My goal is to connect this 2 over the internet via IPsec. I created the IPsec Net2Net via the network configuration graphic tool, and I configured the cisco following the howto http://www.johnleach.co.uk/documents/freeswan-pix/freeswan-pix.html . From my understanding, I should have an ipsec0 network device showing up, so that I could route all traffic from 192.168.10.x directed to 192.168.100.x through it. The thing is that when I try to ifup ipsec0 I get the following errors:
modprobe: modprobe: Can't locate module ripemd160 modprobe: modprobe: Can't locate module cast128 modprobe: modprobe: Can't locate module lzs modprobe: modprobe: Can't locate module lzjh
So, after googling and reading a lot with no success, I would like to ask for advice on this, and successfull story :). I really need to have this VPN running, and I am not tied to this one solution only, linux-to-linux VPN, openVPN or anything else you could suggest would be great.
Thanks in advice
Simone _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos