On 11/13/2012 09:21 AM, Johnny Hughes wrote:
On 11/13/2012 07:49 AM, Banyan He wrote:
Just check the config to build the edac_mce module if you don't build it in.
CONFIG_EDAC_MCE=y
Make sure you have this in the /boot/config-xxxx.
If he is running a standard CentOS kernel then he should have CONFIG_EDAC_MCE=y.
On 2012-11-13 8:12 PM, Ted Miller wrote:
During booting of Centos6 I see an error message that goes something like:
Starting mcelog daemon [FAILED] AMD Processor family 15: Please load edac_mce_amd module. CPU is unsupported
The only helpful information I have found is in the "preview" of https://access.redhat.com/knowledge/solutions/158503. I don't have a RedHat account, so don't know if they have a real solution.
I know that mce has to do with logging certain microprocessor errors.
- How important is this
- Is there anything I should do, except wait for a bug fix sometime?
Ted Miller Elkhart, IN
What is does this command say:
uname -r
Install is 100% stock, off Minimal Install disk, then added groups for Desktop. Up to date.
[tmiller@office04]$uname -r 2.6.32-279.14.1.el6.x86_64
Then I tried the command the web page has (I see my error during bootup)
[root@office04 Documents]# /etc/init.d/mcelogd start [root@office04 Documents]# /etc/init.d/mcelogd status Checking for mcelog mcelog is stopped
[tmiller@office04]$ls /dev/mc* /dev/mcelog
so the device does exist
[root@office04 Documents]# locate edac_mci_amd
returned nothing, but I don't know if it should or not.
I was reading the MAN page, and noticed "See mcelog --help for a list of valid CPUs." so I tried it, and it lists: Valid CPUs: generic p6old core2 k8 p4 dunnington xeon74xx xeon7400 xeon5500 xeon5200 xeon5000 xeon5100 xeon3100 xeon3200 core_i7 core_i5 core_i3 nehalem westmere xeon71xx xeon7100 tulsa intel xeon75xx xeon7500 xeon7200 xeon7100 sandybridge sandybridge-ep All the CPUs I recognize in there are Intel, though I don't know all the nicknames.
cat /proc/cpuinfo
on my system shows (only first of two cores copied)
processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 35 model name : Dual Core AMD Opteron(tm) Processor 180 stepping : 2 cpu MHz : 1000.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good pni lahf_lm cmp_legacy bogomips : 2009.40 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp
Not the latest and greatest, and old enough I expected it to be supported by now.
Any clues in all this? Ted Miller