On Wed, Dec 10, 2008 at 4:23 PM, Clint Dilks clintd@scms.waikato.ac.nz wrote:
Jerry Geis wrote:
I am wanting to use a motherboard that uses the 8111b reaktek chip. http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b This was great information.
My question is now that I have a compiled module for centos 5.2 is there any way I can include that module in a DVD or load the module from USB at the installation time???
I use kickstart and that needs to work over the network.
Is there an easy way to load a network driver at install from USB or something like that?
Jerry _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Hi,
You will need to create a custom initrd that contains the updated modules that you want to use. Unfortunately it was some time ago since I had to do this so I cant give you clear instructions on how to go about doing this but there is lots of documentation on the web. The key thing you will need to remember is that you need to build the module for the same version of the kernel as used by the installer.
Good Luck :)
Building a custom initrd or just adding a driver to it can be found on google.... kickstart makes it easy because you do not need to build a CDROM...
A quick and handy trick is to leverage an inexpensive USB ethernet network device that is already supported. Once the OS is loaded the new driver can be compiled and loaded on the system itself. If you are kickstarting a handful of boxes one time this trick is the way to go.