hi everyone I've just configured a simple raid10 on a Dell system, but one thing is puzzling to me. I'm seeing this below and I wonder why? There: Consist = No ... /c0/v1 : ======
--------------------------------------------------------------- DG/VD TYPE State Access Consist Cache Cac sCC Size Name --------------------------------------------------------------- 3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB ---------------------------------------------------------------
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent| R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack| AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled Check Consistency
PDs for VD 1 : ============
-----------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp -----------------------------------------------------------------------
50:0 76 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:1 75 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:2 57 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:3 181 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:4 33 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:5 179 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:6 37 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:7 45 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:8 36 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:9 28 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:10 46 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:11 31 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:12 26 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:13 43 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:14 27 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:15 29 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:17 53 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:18 55 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:19 89 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U 50:20 54 Onln 3 1.818 TB SAS HDD N N 512B ST32000444SS U -----------------------------------------------------------------------
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded CFShld-Configured shielded
VD1 Properties : ============== Strip Size = 64 KB Number of Blocks = 39059456000 Span Depth = 2 Number of Drives Per Span = 10 Write Cache(initial setting) = WriteBack Disk Cache Policy = Enabled Encryption = None Data Protection = None Active Operations = Background Initialization (0%) Exposed to OS = Yes Creation Date = 03-02-2017 Creation Time = 04:14:41 PM Emulation type = None
#end Would you know if this is normal? I also cannot start consistency check:
$ perccli /c0/v1 start cc force Controller = 0 Status = Failure Description = None
Detailed Status : ===============
------------------------------------------------ VD Operation Status ErrCd ErrMsg ------------------------------------------------ 1 CC Failed 1001 Start CC not possible ------------------------------------------------
to me it's weird, but then, it's my fist raid10 on Dell hardware. many thanks, L.