On 09/08/2016 23:08, Gordon Messmer wrote:
On 08/09/2016 11:51 AM, Birta Levente wrote:
If I add "#route add default gw 192.168.1.1 dev enp3s0" all is good, but cannot add that in route-iface file or with "ip route" ....
Are you using the "network" or the "NetworkManager" service to configure your network? I haven't verified that the route-<interface> files are supported by NetworkManager.
If you are using the older "network" service, then you might be getting the syntax of the route-<interface> file wrong. If you included the contents of your ifcfg-<interface> and route-<interface> files, we could check.
I'm using older network service ... I hate NetworkManager :) And all that content was included in the original post, but a copy/paste is not a problem:
route-enp2s0: 192.168.1.0/24 dev enp2s0 src 192.168.1.12 table t2 default via 192.168.1.1 dev enp2s0 table t2
route-enp3s0: 192.168.1.0/24 dev enp3s0 src 192.168.1.13 table t3 default via 192.168.1.1 dev enp3s0 table t3
rule-enp2s0: from 192.168.1.12/32 table t2 to 192.168.1.12/32 table t2
rule-enp3s0: from 192.168.1.13/32 table t3 to 192.168.1.13/32 table t3