Arun Khan wrote:
On Wed, Jun 20, 2012 at 10:06 AM, Arun Khan knura9@gmail.com wrote:
On Wed, Jun 20, 2012 at 1:00 AM, m.roth@5-cent.us wrote:
.... snip ....
For one thing, edit grub.conf and get *rid* of that idiot rhgb and quiet,
<snip>
edit the kernel line in grub, and add rdshell at the end, so you boot into grub's rudimentary shell if/when it fails, and you can look
around and
find what it's seeing.
Will try your suggestion and report back.
<nsip>
Reboot the system with disk1 removed, the kernel boots, the 'md' driver tries to bind sda. At this point the systems seems to hang for a few seconds and then 'dracut' reports that it cannot find /dev/md_dop1 (the root partition)
dracut Warning: No root device "block:/dev/md_d0p1" foundConsole image pasted here http://imagebin.org/217229
At this point, I'm starting to wonder if the initrd.img has the drivers for software RAID. You *might* need to rebuild that.
In the "rdshell" environment I can see that /etc/mdadm.conf is defined but beyond this I don't know what to look for.
Changing the Partition Id for the RAID1 partitions to 'fd' does not help.
Any further suggestions and/or comments?
What devices are there in /dev/? /dev/sd? /dev/md?
mark