[CentOS] proftpd graphical clients not working

Hello list,

With my latest proftpd server graphical client error on list (ls) directory:

Error: Could not read from socket: ECONNRESET - Connection reset by peer Error: Disconnected from server Error: Failed to retrieve directory listing

So far I've tried both filezilla and cyberduck.

But command line ftp works completely:

[dunphy@BAM-025715-TD:~] #ftp jfweb Connected to jfweb. 220FTP Server ready. Name (jfweb:user): user 331 Password required for user Password: 230 User user logged in Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 229 Entering Extended Passive Mode (|||62007|) 150 Opening ASCII mode data connection for file list -rw-r--r-- 1 root root 0 Dec 13 15:48 test -rw-r--r-- 1 jfuser ftpgroup 0 Dec 13 16:10 test2 226 Transfer complete ftp> put config.log local: config.log remote: config.log 229 Entering Extended Passive Mode (|||62933|) 150 Opening BINARY mode data connection for config.log 100% |**************************************************************************************************************************| 20280 579.79 KiB/s 00:00 ETA 226 Transfer complete 20280 bytes sent in 00:00 (260.10 KiB/s) ftp> ls 229 Entering Extended Passive Mode (|||60334|) 150 Opening ASCII mode data connection for file list -rw-r--r-- 1 jfuser ftpgroup 20280 Dec 13 16:10 config.log -rw-r--r-- 1 root root 0 Dec 13 15:48 test -rw-r--r-- 1 jfuser ftpgroup 0 Dec 13 16:10 test2 226 Transfer complete

Why does this config file not support any graphical FTP clients?

# This is the ProFTPD configuration file # # See: http://www.proftpd.org/docs/directives/linked/by-name.html

# Server Config - config used for anything outside a <VirtualHost> or <Global> context # See: http://www.proftpd.org/docs/howto/Vhost.html

ServerName "ProFTPD server" ServerIdent on " FTP Server ready." ServerAdmin root@localhost DefaultServer on DefaultRoot ~ PassivePorts 60000 65535

# Cause every FTP user except adm to be chrooted into their home directory # Aliasing /etc/security/pam_env.conf into the chroot allows pam_env to # work at session-end time (http://bugzilla.redhat.com/477120) VRootEngine on VRootAlias etc/security/pam_env.conf /etc/security/pam_env.conf

# Define the log formats LogFormat default "%h %l %u %t "%r" %s %b" LogFormat auth "%v [%P] %h %t "%r" %s"

# Use pam to authenticate (default) and be authoritative #AuthPAMConfig proftpd #AuthOrder mod_auth_pam.c* mod_auth_unix.c # If you use NIS/YP/LDAP you may need to disable PersistentPasswd #PersistentPasswd off

# Don't do reverse DNS lookups (hangs on DNS problems) UseReverseDNS off

# Set the user and group that the server runs as User nobody Group nobody

# To prevent DoS attacks, set the maximum number of child processes # to 20. If you need to allow more than 20 concurrent connections # at once, simply increase this value. Note that this ONLY worksuth # in standalone mode; in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 20

# Disable sendfile by default since it breaks displaying the download speeds in # ftptop and ftpwho UseSendfile off

# Dynamic Shared Object (DSO) loading # See README.DSO and howto/DSO.html for more details # # General database support (http://www.proftpd.org/docs/contrib/mod_sql.html) LoadModule mod_sql.c # # Support for base-64 or hex encoded MD5 and SHA1 passwords from SQL tables # (contrib/mod_sql_passwd.html) # LoadModule mod_sql_passwd.c # # Mysql support (requires proftpd-mysql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) LoadModule mod_sql_mysql.c

# Postgresql support (requires proftpd-postgresql package) # (http://www.proftpd.org/docs/contrib/mod_sql.html) # LoadModule mod_sql_postgres.c

# Quota support (http://www.proftpd.org/docs/contrib/mod_quotatab.html) LoadModule mod_quotatab.c

# File-specific "driver" for storing quota table information in files # (http://www.proftpd.org/docs/contrib/mod_quotatab_file.html) # LoadModule mod_quotatab_file.c

# SQL database "driver" for storing quota table information in SQL tables # (http://www.proftpd.org/docs/contrib/mod_quotatab_sql.html) LoadModule mod_quotatab_sql.c

# TLS (http://www.castaglia.org/proftpd/modules/mod_tls.html) <IfDefine TLS> TLSEngine on TLSRequired on TLSRSACertificateFile /etc/pki/tls/certs/proftpd.pem TLSRSACertificateKeyFile /etc/pki/tls/certs/proftpd.pem TLSCipherSuite ALL:!ADH:!DES TLSOptions NoCertRequest TLSVerifyClient off #TLSRenegotiate ctrl 3600 data 512000 required off timeout 300 TLSLog /var/log/proftpd/tls.log <IfModule mod_tls_shmcache.c> TLSSessionCache shm:/file=/var/run/proftpd/sesscache </IfModule> </IfDefine>

# Dynamic ban lists (http://www.proftpd.org/docs/contrib/mod_ban.html) # Enable this with PROFTPD_OPTIONS=-DDYNAMIC_BAN_LISTS in /etc/sysconfig/proftpd <IfDefine DYNAMIC_BAN_LISTS> LoadModule mod_ban.c BanEngine on BanLog /var/log/proftpd/ban.log BanTable /var/run/proftpd/ban.tab

# If the same client reaches the MaxLoginAttempts limit 2 times # within 10 minutes, automatically add a ban for that client that # will expire after one hour. BanOnEvent MaxLoginAttempts 2/00:10:00 01:00:00

# Allow the FTP admin to manually add/remove bans BanControlsACLs all allow user ftpadm </IfDefine>

# Global Config - config common to Server Config and all virtual hosts # See: http://www.proftpd.org/docs/howto/Vhost.html <Global>

# Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable Umask 022

# Allow users to overwrite files and change permissions AllowOverwrite yes <Limit ALL SITE_CHMOD> AllowAll </Limit>

# The passwords in MySQL are encrypted using CRYPT SQLAuthTypes Plaintext Crypt SQLAuthenticate users groups

# used to connect to the database # databasename@host database_user user_password SQLConnectInfo ftp@localhost proftpd Duk30fZh0u

# Here we tell ProFTPd the names of the database columns in the "usertable" # we want it to interact with. Match the names with those in the db SQLUserInfo ftpuser userid passwd uid gid homedir shell

# Here we tell ProFTPd the names of the database columns in the "grouptable" # we want it to interact with. Again the names match with those in the db SQLGroupInfo ftpgroup groupname gid members

# Here we tell ProFTPd the names of the database columns in the "grouptable" # we want it to interact with. Again the names match with those in the db SQLGroupInfo ftpgroup groupname gid members

# set min UID and GID - otherwise these are 999 each SQLMinID 500

# Update count every time user logs in SQLLog PASS updatecount SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser

# Update modified everytime user uploads or deletes a file SQLLog STOR,DELE modified SQLNamedQuery modified UPDATE "modified=now() WHERE userid='%u'" ftpuser

# User quotas # =========== QuotaEngine on QuotaDirectoryTally on QuotaDisplayUnits Mb QuotaShowQuotas on

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM ftpquotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"

SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM ftpquotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"

SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" ftpquotatallies

SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" ftpquotatallies

SQLLogFile /home/bluethundr/sqllog.dbg

QuotaLimitTable sql:/get-quota-limit QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally

RootLogin off RequireValidShell off

</Global>

<VirtualHost 184.72.158.17> MasqueradeAddress 184.72.158.17 <Directory /var/www/jf-current> Umask 022 <Limit ALL> AllowUser jfuser </Limit> </Directory> </VirtualHost>

<VirtualHost 10.34.135.34> <Directory /var/www/jf-current> Umask 022 <Limit ALL> AllowUser jfuser </Limit> </Directory> </VirtualHost>

Thanks in advance for your help!

Tim