On Thu, 2005-11-24 at 14:51 +0100, Farkas Levente wrote:
hi, we've got a server with a 8 port 3ware card and 2 ide system disks.
Are you saying you have 2 IDE disks on the 3Ware? Or they are connected to the mainboard's ATA channels?
now we'd like to replace the ide disks with scsi disks or sata disks (these also recognized as scsi in the kernel).
On which device? Are you saying you want to remove the IDE disks from the mainboard's ATA channels, and use the 3Ware volumes to boot?
Or other?
but we can't boot from it.
If its the case where you want to remove the IDE disks from the mainboard's ATA channels and let the 3Ware boot, then your problem is the BIOS Fixed Disk mapping to Linux device.
1) That is handled by the file "/boot/grub/device.map".
E.g., your current /boot/grub/device.map probably has something like: (fd0) /dev/fd0 (hd0) /dev/hda (hd1) /dev/hdc (hd2) /dev/sda
BIOS Disk 80h is /dev/hda BIOS Disk 81h is /dev/hdc BIOS Disk 82h is /dev/sda
If you remove /dev/hda and /dev/hdc -- *OR* tell your BIOS to boot off- chipset channels/cards first (like the 3Ware card) -- then the BIOS Disk 80h will become /dev/sda. You have to tell GRUB this in its mapping or it won't boot.
So you need to change your file "/boot/grub/device.map" to: (fd0) /dev/fd0 (hd0) /dev/sda And, optionally if you still leave the IDE disks attached to the ATA channels, but just changed the boot order in the BIOS: (hd1) /dev/hda (hd2) /dev/hdc
2) You'll _also_ need to re-install the GRUB loader into /dev/sda with: grub-install /dev/sda
The easiest way to do that is to use a Rescue disk (e.g., CD #1 of your CentOS release).
3) Lastly, you'll need to modify your main /boot/grub/grub.conf entries to reflect that root is in /dev/sda now, instead of /dev/hda -- as well as in /etc/fstab (if you're not using Ext2/3 filesystem labels).
the problem are twofold. first in the normal case the first scsi host scsi0 id the 3ware card, but grub only see the first 8 disk so if the system disk are sdi and sdj the one can't boot from it. on the other hand if one disk is removed from the 3ware card or the kernel reorder the scsi disk and sdi become sdh which is also a problem both for the bios and for the kernel.
If you're going to use the 3Ware card, why not put the 2 disks on port 0 and 1 -- instead of port 6 and 7?
But even then, the BIOS _should_ enumerate the first 2 disks as BIOS disk 80h and 81h _if_ no other drives are in the system. In that case, it's just a matter of editing the /boot/grub/device.map with: (fd0) /dev/fd0 (hd0) /dev/sdi (hd1) /dev/sdj And running: grub-install /dev/sdi And well as /boot/grub/grub.conf and /etc/fstab changes as appropriate.
Or do you already have the first port 0-5 populated? If so, then let's assume they are a 6 disk RAID-5 volume of /dev/sda, and then you have the port 6 and 7 disks as /dev/sdi and /dev/sdj: (fd0) /dev/fd0 (hd0) /dev/sda (hd1) /dev/sdi (hd2) /dev/sdj Running: grub-install /dev/sda While putting in hd(1,x) and /dev/sdi in /boot/grub/grub.conf because it's booting from /dev/sdi (even though GRUB is on /dev/sda for the MBR).
if i change the order in bios, the kernel still use as 3ware scsi0. if i use scsihosts kernel param or load the scsi driver (through modprobe.conf) in a reverse order then the kernel hang forever during the initialization of the 3ware driver.
It hangs? Or you get a kernel panic?
You should get a kernel panic because the BIOS disk doesn't map to the proper Linux /dev/.
Again, I need you to _clarify_ and give _exact_info_ of ...
1. What is your _exact_ configuration of your mainboard ATA channels (channel, disk, etc...) -- current as well as what you want to change?
2. What is your _exact_ configuration of your 3Ware card (ports, disk, etc...) -- again, current as well as what you want to change?
3. Where is your / and/or /boot filesystems, on what disk?
4. What you have setup to boot first in your BIOS -- current as well as what you want to change?
From that, I will give you an _exact_ /boot/grub/device.map file, and
tell you how to configure /boot/grub/grub.conf. It also helps to have a Rescue Disk (or CentOS CD #1) around.
any tip?
You have to get: A) The BIOS order B) The /boot/grub/device.map and /boot/grub/grub.conf C) The GRUB MBR/bootstrap
_Exactly_ mapping correctly. That means if you change just 1, you have to change _all_ 3. Otherwise, it won't work.
thanks in advance. yours.
centos 4.2 kernel-2.6.9-22.0.1.EL 3w_xxxx 1.26.00.039