Hi,
If you want to allow one ip to access one destination then you can write the below rule in iptables.
iptables -t nat -A POSTROUTING -s 192.168.101.230 -d centosip -j MASQUERADE
iptables -t nat -A POSTROUTING -d 192.168.101.230 -s centosip -j MASQUERADE
For remianing ip you can write a simple drop rule to centos ip.
This is will work you out i am sure.
Regards, paps
On Thu, Dec 4, 2008 at 2:51 PM, Indunil Jayasooriya indunil75@gmail.com wrote:
Hi,
I know these are a few iptbales questions. NOT CentOS, anyway, I am running a firewall on centos 5.x.
If you can response, it would be fine.
I want to add a SNAT rule for one user in LAN to access one particular destination on the internet.
Let's say www.centos.org
I added the below rule. But . it does NOT work Pls assume 1.2.3.4 is the real ip of the firewall. ip address 192.168.101.230 is the client PC
iptables -t nat -A POSTROUTING -o eth0 -s 192.168.101.230 -j SNAT --to-source 1.2.3.4 -d www.centos.org
Any idea to achieve it?
And Also,
the below rule excludes 1 ip. it works fine.
iptables -t nat -A PREROUTING -p tcp -m multiport -s ! 192.168.1.9 --destination-port 80,465,995 -j DNAT --to-destination :3128
I want to exclude about 4 or 5 ips.
let's say 192.168.1.11, 192.168.1.19, 192.168.1.20,192.168.1.25
Is there a way to do it?
Hope to hear from you.
-- Thank you Indunil Jayasooriya _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos