Bryan J. Smith wrote:
On Thu, 2005-11-24 at 14:51 +0100, Farkas Levente wrote:
hi, we've got a server with a 8 port 3ware card and 2 ide system disks.
Are you saying you have 2 IDE disks on the 3Ware? Or they are connected to the mainboard's ATA channels?
two more on the mainboard.
now we'd like to replace the ide disks with scsi disks or sata disks (these also recognized as scsi in the kernel).
On which device? Are you saying you want to remove the IDE disks from the mainboard's ATA channels, and use the 3Ware volumes to boot?
Or other?
leave 8 on the 3ware (these are the data disks) and replace the mainboard 2.
if i change the order in bios, the kernel still use as 3ware scsi0. if i use scsihosts kernel param or load the scsi driver (through modprobe.conf) in a reverse order then the kernel hang forever during the initialization of the 3ware driver.
It hangs? Or you get a kernel panic?
hangs, there is no opps:-(